Panasonic Eneloop Battery Charger BQ-CC51 Series
User Manual
Important Safety Precautions
Read all instructions before using the charger. Failure to follow these instructions may result in personal injury or property damage.
- This charger is designed for charging Panasonic eneloop rechargeable batteries (Ni-MH) only. Do not use with other types of batteries.
- Do not charge non-rechargeable batteries.
- Do not expose the charger to water or moisture.
- Do not disassemble or attempt to repair the charger.
- Ensure the batteries are inserted with the correct polarity (+/-).
- Keep the charger away from heat sources and direct sunlight.
- Unplug the charger when not in use or during thunderstorms.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Product Overview
The Panasonic Eneloop BQ-CC51 charger is a compact and efficient charger for AA and AAA eneloop rechargeable batteries. It features individual charging slots and LED indicators to show charging status.
Diagram Description: The diagram shows the charger with four individual battery slots. Each slot has an LED indicator above it. The charger has a power plug on the side.
Charging Instructions
- Insert AA or AAA eneloop batteries into the corresponding slots, ensuring correct polarity.
- Plug the charger into a standard AC power outlet.
- The LED indicators will light up to show that charging has begun.
- The LED indicators will turn off or change color (depending on model) when charging is complete. Refer to the table below for LED status.
- Remove the batteries once charging is complete.
LED Indicators
| LED Status | Description |
|---|---|
| On (e.g., Red) | Charging |
| Off (or Green) | Charging Complete |
| Flashing (e.g., Red) | Error (e.g., incorrect battery insertion, non-rechargeable battery) |
Specifications
Model: BQ-CC51E
Input: 100-240V AC, 50/60Hz
Output: DC 1.5V, AA: 250-300mA x 1-4, AAA: 125-150mA x 1-4
Charging Time (Approximate for 2000mAh AA):
| Number of Batteries | Charging Current | Charging Time (Approx.) |
|---|---|---|
| 1-2 AA | 300mA | ~7.5 hours |
| 3-4 AA | 250mA | ~8.5 hours |
| 1-2 AAA | 150mA | ~10 hours |
| 3-4 AAA | 125mA | ~12 hours |
Note: Charging times may vary depending on battery capacity and condition.
Troubleshooting
- Charger not working: Ensure the charger is properly plugged into a working outlet. Check battery insertion.
- LED flashing: Remove batteries and reinsert them correctly. If the problem persists, the batteries may be damaged or non-rechargeable.
Disposal Information
Do not dispose of this product with household waste. Please follow local regulations for the disposal of electronic waste.
