Einführung
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your BWT ES800 Robotic Pool Cleaner. Please read this manual thoroughly before using the appliance and retain it for future reference.
Sicherheitshinweise
Beachten Sie immer die folgenden Sicherheitsvorkehrungen:
- Vor jeglichen Wartungs- oder Reinigungsarbeiten muss die Stromversorgung unterbrochen sein.
- Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repairs.
- Halten Sie Kinder und Haustiere vom Poolbereich fern, solange das Reinigungsgerät in Betrieb ist.
- Only use the cleaner in pools with appropriate water chemistry levels.
- Do not use the cleaner to remove large debris such as leaves, twigs, or rocks, as this may damage the unit.
- Always remove the cleaner from the pool after each cleaning cycle.
Packungsinhalt
Überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:
- BWT ES800 Robotic Pool Cleaner Unit
- Netzteil
- Floating Cable (59ft)
- Filterkorb
- Bedienungsanleitung (dieses Dokument)
Aufstellen
1. Auspacken und Erstinspektion
Carefully remove all components from the packaging. Inspect the cleaner and its accessories for any signs of damage. If any damage is found, do not operate the unit and contact customer support.
2. Anschließen des Netzteils
- Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool. Ensure it is in a shaded area and protected from direct sunlight and splashing water.
- Connect the floating cable from the cleaner to the power supply unit. Ensure a secure connection.
- Schließen Sie das Netzteil an eine geerdete Steckdose an.
3. Platzieren des Poolreinigers im Pool
Gently lower the BWT ES800 into the pool. Allow it to sink to the bottom. Ensure that all air trapped inside the cleaner is released by gently rocking it from side to side until no more bubbles emerge. Spread the floating cable evenly across the pool surface to prevent tangling.
Image: The BWT ES800 Robotic Pool Cleaner submerged in a pool, ready for operation.
4. App Control Setup (BWT Best Water App)
The BWT ES800 features Bluetooth connectivity for app control. Download the "BWT Best Water App" from the Apple App Store or Google Play Store. Follow the in-app instructions to pair your device with the cleaner. This allows for remote control, cycle selection, and software updates.
Image: The BWT ES800 cleaner next to a smartphone displaying the BWT Best Water App interface for remote control.
Betrieb
1. Starten eines Reinigungszyklus
Once the cleaner is submerged and powered on, you can initiate a cleaning cycle using the button on the unit or through the BWT Best Water App.
2. Cleaning Modes and Cycles
The BWT ES800 offers multiple cleaning modes and cycles to suit your pool's needs:
- Reinigungsmodi:
- Floor: Focuses cleaning on the pool floor.
- Wall & Waterline: Cleans the pool walls and waterline.
- Overall: Provides comprehensive cleaning of the entire pool (floor, walls, and waterline).
- Reinigungszyklen: Selectable durations of 1.5 hours, 2 hours, or 2.5 hours.
The cleaner utilizes a smart navigation system with an integrated gyroscope to adapt its driving pattern to your pool's shape, ensuring complete coverage and avoiding cable tangles.
Image: The BWT ES800 cleaner ascending a pool wall, demonstrating its smart cable control and anti-entanglement system.
Image: The BWT ES800 efficiently cleaning the bottom, walls, and waterline of a pool.
Video: Ein überview of the BWT ES800 Robotic Pool Cleaner's features, including its compact design, PVC brush, powerful suction, high-performance filter, and smart cable control with multiple cleaning modes and cycles.
Wartung
1. Reinigung des Filterkorbs
After each cleaning cycle, it is essential to clean the filter basket to maintain optimal performance. The ES800 features an easy-to-access filter basket.
- Entfernen Sie den Reiniger mit dem Griff aus dem Pool.
- Öffnen Sie den oberen Deckel des Reinigers.
- Heben Sie den Filterkorb heraus.
- Rinse the filter basket thoroughly with a garden hose to remove all debris.
- Setzen Sie den sauberen Filterkorb wieder ein und schließen Sie den Deckel fest.
Image: A hand lifting the filter basket from the BWT ES800, illustrating the "Lift & Rinse" ease of use.
2. Bürstenpflege
Periodically inspect the PVC brushes for wear or damage. If the brushes are worn, they may need replacement to ensure effective cleaning. Contact customer support for replacement parts.
Bild: Eine detaillierte view of the BWT ES800's PVC brush, designed for effective scrubbing.
3. Kabelmanagement
After each use, coil the floating cable neatly to prevent kinks and tangles, which can affect the cleaner's movement and longevity.
4. Speicherung
When not in use, store the BWT ES800 in a cool, dry, and shaded area, away from direct sunlight and extreme temperatures. Ensure the cleaner and its power supply are completely dry before storage.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Reiniger startet nicht. | No power, loose connection, power supply fault. | Check power outlet, ensure all cables are securely connected. Verify power supply unit is functioning. |
| Cleaner moves slowly or erratically. | Clogged filter, tangled cable, debris in brushes/tracks. | Clean filter basket. Untangle cable. Remove debris from brushes and tracks. |
| Cleaner does not clean walls effectively. | Worn brushes, air trapped in unit, incorrect cleaning mode. | Inspect and replace brushes if worn. Ensure all air is expelled from the unit. Select "Wall & Waterline" or "Overall" cleaning mode. |
| Probleme mit der App-Verbindung. | Bluetooth range, app not updated, pairing issue. | Ensure device is within Bluetooth range. Update the BWT Best Water App. Re-pair the device with the cleaner. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modell | ES800 |
| Produktabmessungen (L x B x H) | 15" x 14.6" x 9" (38.1 cm x 37.1 cm x 22.9 cm) |
| Gewicht | Unter 5.9 kg (13 lbs) |
| Kabellänge | 59 Fuß (18 m) |
| Reinigungszyklen | 1.5 Stunden, 2 Stunden, 2.5 Stunden |
| Saugleistung | 4,000 GPH (15 m³/h) |
| Filterfeinheit | 100 µm |
| Pool-Typ | In-ground pools up to 49 ft (15 m) in length |
| Reinigungsbereiche | Boden, Wände, Wasserlinie |
| Kontrolle | On-unit button, BWT Best Water App (Bluetooth) |
| Navigationssystem | Smart Navigation with integrated gyroscope, Gen Core 7 |
| Bürstentyp | aus PVC |
| Stromquelle | AC |
| UPC | 810045773032 |
Image: The BWT ES800 Robotic Pool Cleaner highlighting its key features and specifications.
Image: Internal components of the BWT ES800, showing the propeller motor, left motor, and right motor, emphasizing their efficiency and durability.
Garantie
The BWT ES800 Robotic Pool Cleaner is backed by a 3 Jahr Garantie. This warranty covers manufacturing defects and ensures high-quality build and long-lasting performance. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official BWT webWebsite oder wenden Sie sich an den Kundendienst.
Kundenservice
For further assistance, technical support, or to inquire about replacement parts, please contact BWT customer service. You can find contact information on the official BWT website or through the BWT Best Water App.
Online-Ressourcen: Besuchen Sie die BWT Store on Amazon für Produktinformationen und Support.