DJXFLI 8-Eye LED Moving Head Light User Manual

Wichtige Sicherheitshinweise

Bitte lesen und verstehen Sie alle Sicherheitshinweise, bevor Sie dieses Produkt installieren, in Betrieb nehmen oder warten. Die Nichtbeachtung dieser Hinweise kann zu Stromschlag, Brand oder schweren Verletzungen führen.

• Stromversorgung: Connect the unit to a grounded power outlet with the correct voltage (AC110-240V, 50/60Hz).
• Belüftung: Sorgen Sie für ausreichende Belüftung rund um das Gerät, um eine Überhitzung zu vermeiden. Blockieren Sie die Belüftungsöffnungen nicht.
• Feuchtigkeit: Do not expose the unit to rain or moisture. Avoid using in damp oder an feuchten Orten.
• Installation: Mount the unit securely using appropriate hardware. Ensure the mounting surface can support the weight of the fixture.
• Augensicherheit: Avoid direct eye exposure to the light source. The intense light can cause eye damage.
• Wartung: Vor Reinigungs- oder Wartungsarbeiten die Stromzufuhr unterbrechen. Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.
• Temperatur: Das Gerät darf nicht bei extrem hohen oder extrem niedrigen Temperaturen betrieben werden.

Produkt überview

The DJXFLI 8-Eye LED Moving Head Light is a versatile stage lighting fixture designed for various events. It features eight powerful RGBW 4-in-1 LED light beads, offering a wide range of color mixing and dynamic beam effects.

Abbildung 1: Vorderseite view of the DJXFLI 8-Eye LED Moving Head Light.

Hauptmerkmale:

• Lichtquelle: 8x12W RGBW 4-in-1 LEDs (Red, Green, Blue, White).
• Abstrahlwinkel: 8 degrees, providing focused and intense beams.
• Bewegung: 180° Tilt rotation for dynamic light positioning.
• Strobe: Up to 10 flashes per second (any color).
• Dimmer: 0-100% with regulated constant color control.
• Steuerungsmodi: Auto, DMX512, Master/Slave, Sound Active.
• DMX-Kanäle: 9 or 38 channels selectable.

Komponenten:

Das Paket enthält die folgenden Artikel:

• 1 x DJXFLI 8-Eye LED Moving Head Light
• 1 x Stromkabel
• 1 x DMX-Kabel
• 1 x Benutzerhandbuch (dieses Dokument)
• 2 x Omega Brackets (for mounting)

Abbildung 2: Ausführlich view of the light's rear panel and control interface.

Aufstellen

Montage:

The fixture can be mounted on a flat surface or suspended using the included Omega brackets. Ensure the mounting location is stable and can safely support the fixture's weight (approximately 16.37 lbs).

1. Attach the Omega brackets to the bottom of the fixture using the provided screws.
2. Securely fasten the brackets to a truss or other suitable mounting structure.
3. Always use a safety cable (not included) as a secondary attachment for overhead installations.

Stromanschluss:

Connect the provided power cable to the "POWER IN" port on the rear of the fixture and then to a compatible AC110-240V, 50/60Hz power outlet. The fixture has a "POWER OUT" port for daisy-chaining power to other compatible units.

DMX-Anschluss (optional):

For DMX control, connect a DMX controller to the "DMX IN" port using the provided DMX cable. If connecting multiple fixtures, link them in a daisy-chain configuration from "DMX OUT" of the first fixture to "DMX IN" of the next. Terminate the last fixture in the chain with a DMX terminator (not included) for optimal signal integrity.

Betrieb

The DJXFLI 8-Eye LED Moving Head Light offers four primary control modes, accessible via the LCD display and buttons on the rear panel.

Figure 3: Visual representation of the four control modes.

Bedienfeld:

The control panel features an LCD display and four buttons: MENU, UP, DOWN, and ENTER. Use these buttons to navigate through the menu and select desired settings.

Figure 4: Product specification diagram including control panel details.

1. Auto-Modus:

In Auto mode, the fixture runs through pre-programmed light shows automatically. This mode is ideal for quick setup without external control.

• Press the MENU button until "Auto" appears on the display.
• Use UP/DOWN to select different auto programs if available.
• Drücken Sie ENTER, um die Auswahl zu bestätigen.

2. Sound Active Mode:

The fixture reacts to ambient sound or music, creating dynamic light patterns synchronized with the audio. A built-in microphone detects sound.

• Press the MENU button until "Sound" appears on the display.
• Verwenden Sie gegebenenfalls die Pfeiltasten AUF/AB, um die Tonempfindlichkeit anzupassen.
• Drücken Sie zur Bestätigung die EINGABETASTE.

3. Master/Slave Mode:

This mode allows multiple fixtures to operate in synchronization without a DMX controller. One fixture acts as the "Master" and controls all "Slave" fixtures.

• Master Setup: Select "Master" mode on one fixture via the menu.
• Slave Setup: On all other fixtures, select "Slave" mode.
• Connect the DMX OUT of the Master unit to the DMX IN of the first Slave unit, and continue daisy-chaining.

4. DMX512 Mode:

For advanced control, connect the fixture to a DMX512 controller. This allows precise control over each parameter (color, movement, strobe, dimmer) using DMX channels.

• Set the DMX address for each fixture using the control panel. Ensure each fixture has a unique starting address.
• Select the desired DMX channel mode (9 or 38 channels) on the fixture.
• Refer to the DMX Channel Table in the Specifications section for detailed channel assignments.

Wartung

Regular maintenance ensures optimal performance and extends the lifespan of your DJXFLI 8-Eye LED Moving Head Light.

• Reinigung: Periodically clean the lenses and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Inspektion: Überprüfen Sie regelmäßig Stromkabel, DMX-Kabel und Montagezubehör auf Beschädigungen oder Verschleiß. Beschädigte Komponenten müssen umgehend ausgetauscht werden.
• Belüftung: Ensure cooling fans and ventilation openings are free from dust and debris. Use compressed air to clear blockages if necessary.
• Lagerung: Bewahren Sie die Leuchte bei Nichtgebrauch in einer trockenen, staubfreien Umgebung auf.

Fehlerbehebung

Sollten Sie Probleme mit Ihrer Leuchte haben, beachten Sie bitte die folgenden häufig auftretenden Probleme und Lösungen:

Technische Daten

DMX Channel Table (38-Channel Mode Example):

Unten ist ein Beispielample of DMX channel assignments for the 38-channel mode. Refer to the specific DMX chart provided with your product for exact details, as channel functions can vary.

Garantie und Support

For any questions regarding your DJXFLI 8-Eye LED Moving Head Light, please contact customer support. Refer to your purchase documentation for specific warranty terms and contact information.

E-Mail-Adresse des Kundendienstes: [Refer to product packaging or seller information]

Wir bemühen uns, Anfragen innerhalb von 24 Stunden zu beantworten.