1. Einleitung
The ATOMSTACK P1 is a portable 5W diode laser engraver and cutter designed for precision work on various materials. This manual provides essential information for the safe and effective use of your device, including setup, operation, maintenance, and troubleshooting.
Image 1.1: The ATOMSTACK P1 laser engraver, showcasing sein kompaktes Design und example gravierte Gegenstände.
1.1 Hauptmerkmale
- 5-W-Diodenlaser: Suitable for engraving and cutting a wide range of materials.
- Vielseitige Materialkompatibilität: Engraves wood, bamboo, paper, leather, cardboard, cork, stone, and more.
- AtomStack Software: Free, user-friendly software with design library and material parameter recommendations. Compatible with LightBurn (sold separately).
- Hohe Präzision: CoreXY structure and dual motor drive for up to 0.1mm positioning accuracy.
- Kompakt und tragbar: Engraving area of 110×110mm, footprint 265×303×185mm, weight approximately 3kg.
- Hochgeschwindigkeitsgravur: Up to 10,000mm/min.
- Sicherheitsmerkmale: Fully enclosed design with visible window, built-in focus bar, USB safety interlock, secure enclosure detection, and gyro-based tilt detection.
2. Sicherheitshinweise
Operating a laser engraver requires adherence to strict safety protocols to prevent injury and damage. Read and understand all safety instructions before operating the ATOMSTACK P1.
2.1 Allgemeine Sicherheitsvorkehrungen
- Augenschutz: Always wear appropriate laser safety glasses when the laser is active and the enclosure is open. The P1 features a visible window for observation, but direct exposure to the laser beam can cause permanent eye damage.
- Belüftung: Betreiben Sie den Gravierer in einem gut belüfteten Bereich, um die beim Gravieren entstehenden Dämpfe und den Rauch abzuführen.
- Brennbare Materialien: Gravieren Sie leicht entzündliche Materialien nicht ohne entsprechende Sicherheitsvorkehrungen. Halten Sie einen Feuerlöscher bereit.
- Aufsicht: Lassen Sie den Gravierer während des Betriebs niemals unbeaufsichtigt.
- Kinder und Haustiere: Halten Sie Kinder und Haustiere vom Betriebsbereich fern.
- Stromversorgung: Use only the provided power adapter. Ensure the power supply is stable and correctly grounded.
2.2 Eingebaute Sicherheitsmerkmale
- Vollständig geschlossene Bauweise: The P1 features a fully enclosed design with an orange visible window to contain laser light and fumes.
- Sicherheitsstopp bei geöffnetem Deckel: The engraving process automatically pauses if the lid is opened during operation.
- Secure Enclosure Detection: Ensures the enclosure is properly closed before operation.
- Gyro-Based Tilt Detection: Automatically stops operation if the machine is tilted or moved unexpectedly.
- USB Safety Interlock: Prevents operation if the USB connection is interrupted.
Bild 2.1: Überview of the ATOMSTACK P1's safety features, including the enclosed design and various detection systems.
3. Packungsinhalt
Upon unboxing your ATOMSTACK P1, verify that all components are present and undamaged. Refer to the packing list included with your device for a complete inventory.
Video 3.1: An unboxing video for the AtomStack P1, demonstrating the contents of the package and initial setup steps.
4. Einrichtung
The ATOMSTACK P1 is designed for quick setup. Follow these steps to prepare your engraver for its first use.
4.1 Erstplatzierung
- Stellen Sie den Gravierer auf eine stabile, ebene Fläche.
- Sorgen Sie für ausreichend Freiraum um die Maschine herum, um Belüftung und Zugang zu gewährleisten.
4.2 Stromanschluss
- Connect the power adapter to the engraver's power input port.
- Stecken Sie das Netzteil in eine geeignete Steckdose.
- Turn on the main power switch, usually located on the side or back of the unit.
4.3 Laser Module Installation/Replacement
If your laser module is not pre-installed or needs replacement, follow these instructions:
- Ensure the engraver is powered off and unplugged.
- Carefully remove the existing laser module or access the installation slot.
- Align the new laser module with the mounting mechanism and secure it in place.
- Connect any necessary cables to the laser module.
Video 4.1: Instructions on how to replace the laser module on the AtomStack P1 engraver.
5. Bedienungsanleitung
The ATOMSTACK P1 can be operated using the dedicated AtomStack Studio software or a compatible third-party application like LightBurn.
5.1 Softwareinstallation und -verbindung
Download and install the AtomStack Studio software from the official ATOMSTACK website or app store. The software supports Windows/macOS (USB) and iOS/Android (WiFi/AP).
Image 5.1: The AtomStack Studio software interface shown across multiple devices, highlighting its user-friendly design.
5.1.1 Connecting via AtomStack App (WiFi/AP)
- Ensure your P1 is powered on.
- Open the AtomStack app on your iOS or Android device.
- Follow the in-app instructions to connect to the P1 via WiFi or Access Point (AP) mode.
Video 5.2: A guide on how to connect the P1 laser engraver using the AtomStack mobile application.
5.1.2 Connecting via AtomStack Studio Software (USB)
- Connect the P1 to your Windows or macOS computer using the provided USB cable.
- Open the AtomStack Studio software.
- The software should automatically detect the connected device. If not, follow the software's connection prompts.
Video 5.3: Demonstrates the process of connecting the P1 engraver to a computer using the AtomStack Studio software.
5.1.3 Connecting via LightBurn Software (USB)
The P1 is compatible with LightBurn software (purchased separately). Refer to LightBurn's documentation for specific connection instructions.
Video 5.4: Instructions on how to connect the P1 laser engraver using LightBurn software.
5.2 Gravurprozess
- Material vorbereiten: Place the material to be engraved or cut onto the working platform. Ensure it is flat and securely positioned.
- Fokuseinstellung: Use the built-in focus bar to achieve precise focus. This ensures optimal engraving quality.
- Designauswahl: In the AtomStack Studio software or app, select or create your desired design.
- Parametereinstellungen: Adjust engraving parameters (power, speed, passes) based on the material type. The software provides recommended settings.
- Vorview und Position: Use the framing function to preview the engraving area on your material. Adjust the material or design position as needed.
- Beginnen Sie mit der Gravur: Close the enclosure lid and initiate the engraving process from the software or app. The machine will automatically pause if the lid is opened during operation.
Bild 5.5: Eine Nahaufnahme view of the ATOMSTACK P1 performing a detailed engraving, demonstrating its precision.
6. Verwendung von Zubehör
The ATOMSTACK P1 supports various accessories to expand its capabilities, such as rotary chucks and rollers for cylindrical objects.
6.1 Verwendung des R8-Drehfutters
The R8 Rotary Chuck (sold separately) allows for engraving on cylindrical objects. Ensure the chuck is properly installed and configured in the software.
Video 6.1: A tutorial demonstrating how to set up and use the R8 Rotary Chuck with the P1 engraver.
6.2 Using the R6 Rotary Roller
The R6 Rotary Roller (sold separately) is another accessory for engraving cylindrical items. Adjust the roller gap as needed for different object diameters.
Video 6.2: A demonstration on how to use the R6 Rotary Roller with the P1 laser engraver.
Image 6.3: The ATOMSTACK P1 shown with optional accessories, including rotary chucks, rotary rollers, and an air purifier.
7. Wartung
Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK P1.
7.1 Reinigung
- Laserlinse: Reinigen Sie die Laserlinse regelmäßig mit einem weichen, fusselfreien Tuch und einer Linsenreinigungslösung, um die Gravurqualität zu erhalten.
- Arbeitsbereich: Entfernen Sie nach jedem Gebrauch Schmutz und Staub von der Gravierplattform und aus dem Inneren der Maschine.
- Exterieur: Wischen Sie die Außenflächen mitamp Tuch. Verwenden Sie keine aggressiven Chemikalien.
7.2 Pflege des Lasermoduls
The laser module is a critical component. Handle it with care and refer to the replacement instructions if necessary.
8. Fehlerbehebung
This section addresses common issues you might encounter with your ATOMSTACK P1.
8.1 Häufige Probleme und Lösungen
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Engraver not powering on | Power cable disconnected, power switch off, faulty power adapter | Check power connections, ensure switch is on, try a different outlet. |
| Laser feuert nicht oder nur schwach. | Incorrect focus, dirty laser lens, incorrect software settings, faulty laser module | Adjust focus, clean laser lens, verify power/speed settings in software, consider laser module replacement. |
| Connection issues (USB/WiFi) | Loose cable, incorrect WiFi settings, software driver issues | Ensure cables are secure, reconfigure WiFi, reinstall software drivers. |
| Die Gravurqualität ist schlecht/uneinheitlich. | Incorrect focus, material not flat, inappropriate power/speed settings, dirty lens | Re-focus the laser, ensure material is flat, adjust engraving parameters, clean the lens. |
| Maschine stoppt während des Betriebs | Lid opened, machine tilted (safety feature triggered), USB disconnected | Ensure lid is closed, place on a stable surface, check USB connection. |
9. Spezifikationen
Technical specifications for the ATOMSTACK P1 5W Laser Engraver.
| Besonderheit | Detail |
|---|---|
| Modell | P1 |
| Laserleistung | 5000 mW (5 W) |
| Laserklasse | KLASSE 1 |
| Gravurbereich | 110mm × 110mm (Diode Laser) |
| Gravurgeschwindigkeit (Max.) | 10,000 mm/min |
| Positionierungsgenauigkeit | Bis zu 0.1 mm |
| Technische Daten | 11.93 x 10.43 x 7.28 inches (265×303×185mm) |
| Artikelgewicht | 10.73 Pfund (ca. 3 kg) |
| Konnektivität | USB (Windows/macOS), WiFi/AP (iOS/Android) |
| Softwarekompatibilität | AtomStack Studio App/Software, LightBurn (sold separately) |
Image 9.1: Detailed specifications and material compatibility chart for the ATOMSTACK P1, including both single and dual laser versions.
10. Garantie und Support
Informationen zu Garantie, technischem Support oder Serviceanfragen finden Sie auf der offiziellen ATOMSTACK-Website. webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
- Offiziell WebWebsite: Visit the ATOMSTACK official webHier finden Sie die neuesten Support-Ressourcen, FAQs und Kontaktinformationen.
- Kundendienst: Contact ATOMSTACK customer support for assistance with product issues or technical guidance.