Benutzerhandbücher+

Fame MMS-4

Fame MMS-4 Bluetooth Aktiv-Studiomonitore – Benutzerhandbuch

Model: MMS-4

1. Einleitung

Thank you for choosing the Fame MMS-4 Bluetooth Active Studio Monitors. This manual provides essential information for the safe and efficient operation of your new studio monitors. Please read this manual thoroughly before use and retain it for future reference.

2. Sicherheitshinweise

3. Packungsinhalt

Bitte überprüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:

4. Produktüberschreitungview

4.1-Vorderseite View

Fame MMS-4 Studio Monitors Front View with Grilles

Bild 1: Vorderseite view of the Fame MMS-4 studio monitors with protective grilles installed. Both speakers feature the 'FAME' logo at the bottom.

Fame MMS-4 Studio Monitors Front View without Grilles

Bild 2: Vorderseite view of the Fame MMS-4 studio monitors with grilles removed, revealing the tweeter and woofer components.

The front panel of the MMS-4 monitors features the speaker drivers (woofer and tweeter) and a removable protective grille. The active speaker also includes a small LED indicator for power and Bluetooth status.

4.2 Side Panel (Active Speaker)

Fame MMS-4 Active Studio Monitor Side Panel Controls

Image 3: Side panel of the active Fame MMS-4 monitor, showing the control interface with USB port, volume, treble, bass knobs, and mode selection buttons.

The side panel of the active (master) speaker houses the main controls and additional connectivity options:

4.3 Rear Panel (Active Speaker)

Fame MMS-4 Active Studio Monitor Rear Panel Connections

Image 4: Rear panel of the active Fame MMS-4 monitor, displaying various input and output connections, power switch, and AC input.

The rear panel of the active speaker provides all necessary audio inputs and power connections:

4.4 Rear Panel (Passive Speaker)

Fame MMS-4 Passive Studio Monitor Rear Panel Connection

Image 5: Rear panel of the passive Fame MMS-4 monitor, showing the speaker input terminals for connection to the active speaker.

The passive speaker features speaker input terminals for connection to the active speaker using the provided speaker cable.

5. Einrichtung

  1. Platzierung: Place the active and passive speakers on a stable surface, ideally at ear level, forming an equilateral triangle with your listening position for optimal stereo imaging.
  2. Lautsprecher anschließen: Use the provided speaker cable to connect the "OUTPUTS (Speaker)" terminals on the active speaker to the "INPUT" terminals on the passive speaker. Ensure correct polarity (red to red, black to black).
  3. Audioquelle anschließen:
    • Cinch: Connect your audio source (e.g., mixer, audio interface) to the "INPUTS (RCA)" on the active speaker.
    • Koaxial: Connect a digital audio source to the "COAXIAL Input" on the active speaker.
    • USB: Stecken Sie ein USB-Laufwerk mit Audio ein files in den USB-Anschluss an der Seitenwand.
  4. Strom anschließen: Connect the power cable to the "AC INPUT" on the active speaker and then to a suitable wall outlet.
  5. Einschalten: Flip the "POWER" switch on the rear panel of the active speaker to the "ON" position.

6. Bedienungsanleitung

  1. Eingabequelle auswählen: Use the "MODE" buttons on the side panel of the active speaker to cycle through the available input sources (Bluetooth, Line In, USB, Coaxial). The LED indicator will change color or pattern to indicate the selected mode.
  2. Lautstärke anpassen: Rotate the "VOL" knob to adjust the overall listening volume. Start at a low volume and gradually increase it to a comfortable level.
  3. Ton anpassen: Use the "TRE" (Treble) and "BAS" (Bass) knobs to fine-tune the high and low frequencies according to your preference or room acoustics.
  4. USB-Wiedergabe: When USB mode is selected, the system will automatically play audio files from the connected USB drive. Use the mode buttons to skip tracks or pause playback if supported.

7. Bluetooth-Kopplung

To connect your Bluetooth-enabled device to the Fame MMS-4 monitors:

  1. Enable Bluetooth Mode: Press the "MODE" button on the active speaker's side panel until the Bluetooth input is selected. The LED indicator will typically flash, indicating it's in pairing mode.
  2. Bluetooth auf dem Gerät aktivieren: Aktivieren Sie Bluetooth auf Ihrem Smartphone, Tablet oder Computer und suchen Sie nach verfügbaren Geräten.
  3. Select "Fame MMS-4": From the list of found devices, select "Fame MMS-4".
  4. Verbindung bestätigen: Once paired, the LED indicator on the active speaker will typically stop flashing and remain solid, indicating a successful connection. You can now play audio from your device through the monitors.

8. Wartung

9. Fehlerbehebung

ProblemMögliche UrsacheLösung
Kein StromPower cable disconnected; Power switch off; Wall outlet faulty.Ensure power cable is securely connected; Turn power switch ON; Test wall outlet with another device.
Kein TonIncorrect input selected; Volume too low; Audio source not playing; Speaker cable loose.Select correct input mode; Increase volume; Check audio source playback; Secure speaker cable connections.
Bluetooth nicht gekoppeltSpeakers not in pairing mode; Device Bluetooth off; Device too far.Ensure Bluetooth mode is selected and flashing; Enable Bluetooth on your device; Move device closer to speakers.
Verzerrter TonVolume too high; Audio source signal too strong; Incorrect tone settings.Reduce volume on speakers or audio source; Adjust Treble/Bass knobs.

10. Spezifikationen

11. Garantie und Support

Fame products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or visit the official Fame webBitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

For further assistance, contact your retailer or the manufacturer's customer support.