FEELNEEDY FN-W23

FEELNEEDY FN-W23 3L Cat Drinking Fountain User Manual

Modell: FN-W23

1. Einleitung

Thank you for choosing the FEELNEEDY FN-W23 3L Cat Drinking Fountain. This product is designed to provide a continuous supply of fresh, filtered water for your pets, encouraging them to drink more and stay hydrated. Please read this manual carefully before setup and operation to ensure proper use and maintenance.

2. Sicherheitshinweise

  • Nur für den Innenbereich.
  • Vor der Reinigung oder Wartung des Springbrunnens immer den Netzstecker ziehen.
  • Do not allow the pump to run dry. Ensure the water level is always above the minimum mark.
  • Halten Sie das Netzkabel von Haustieren fern, die daran knabbern könnten.
  • Use only a 5V/1A USB power adapter (not included) with this device.
  • Do not immerse the USB plug or power adapter in water.
  • Außerhalb der Reichweite von Kindern aufbewahren.
  • If the power cord is damaged, do not use the fountain. Contact customer support.

3. Packungsinhalt

Bitte überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

  • 1 x Pet Drinking Fountain (main body, stainless steel bowl, transparent water tank)
  • 1 x Wasserpumpe
  • 1 x Aktivkohlefilter
  • 1 x Water Pump Filter Sponge
  • 1 x Benutzerhandbuch
FEELNEEDY FN-W23 Cat Drinking Fountain components laid out

Image: All components of the FEELNEEDY FN-W23 Cat Drinking Fountain, including the main body, stainless steel bowl, pump, filter, and manual.

4. Einrichtungsanweisungen

  1. Spülkomponenten: Thoroughly rinse the stainless steel drinking bowl, transparent water tank, and pump with clean water before first use.
  2. Filterschwamm einbauen: Place the small filter sponge onto the water pump intake.
  3. Pumpe platzieren: Position the water pump securely at the bottom of the transparent water tank. Ensure the power cord is routed through the designated groove.
  4. Install Activated Carbon Filter: Place the activated carbon filter into the filter tray, ensuring it sits flat.
  5. Oberes Tablett zusammenbauen: Place the filter tray with the activated carbon filter onto the transparent water tank.
  6. Wasser hinzufügen: Fill the transparent water tank with clean water up to the 'MAX' line. Do not overfill. The fountain has a 3L capacity.
  7. Edelstahlschüssel hinstellen: Position the stainless steel drinking bowl on top of the assembled unit.
  8. Strom anschließen: Connect the USB cable to a 5V/1A USB power adapter (not included) and plug it into a power outlet.
FEELNEEDY FN-W23 Cat Drinking Fountain components ready for assembly

Image: Disassembled components of the fountain, showing the main body, stainless steel bowl, and filter parts.

FEELNEEDY FN-W23 Cat Drinking Fountain with water level indicator

Image: The transparent water tank with a visible water level, indicating the 3L capacity.

5. Bedienungsanleitung

Once assembled and plugged in, the fountain will begin to circulate water. The design ensures a continuous flow, enticing pets to drink.

  • Wasserstand: Regularly check the water level through the transparent tank. Refill when the water level is low to prevent the pump from running dry. The 3L capacity provides sufficient water for extended periods.
  • Emergency Water Backup: The spacious stainless steel tray holds approximately 300ml of water, providing an emergency backup in case of power failure or pump malfunction.
  • Leiser Betrieb: The fountain is designed for quiet operation, typically below 25dB, to avoid disturbing your pets or household.
  • Filterung: The multi-layer filtration system, including the activated carbon filter and pump filter sponge, helps remove impurities, odors, and hair from the water, providing fresh water for your pet.
Cat drinking from FEELNEEDY FN-W23 Cat Drinking Fountain

Image: A cat drinking from the assembled FEELNEEDY FN-W23 Cat Drinking Fountain, demonstrating its use.

FEELNEEDY FN-W23 Cat Drinking Fountain with quiet operation indicator

Image: An illustration highlighting the whisper-quiet operation of the FEELNEEDY fountain, showing a sleeping cat nearby.

Diagram of multi-layer filtration in FEELNEEDY FN-W23 Cat Drinking Fountain

Image: A cutaway diagram illustrating the multi-layer filtration system of the fountain, showing different filter components.

6. Wartung

Regular cleaning and filter replacement are crucial for the longevity of the fountain and the health of your pet.

6.1 Tägliche Wartung

  • Prüfen Sie den Wasserstand und füllen Sie bei Bedarf Wasser nach.
  • Remove any visible debris or pet hair from the stainless steel bowl.

6.2 Wöchentliche Reinigung

  1. Stecker ziehen: Trennen Sie den Netzadapter von der Steckdose.
  2. Zerlegen: Remove the stainless steel bowl, filter tray, and water pump.
  3. Saubere Komponenten: Wash all parts (stainless steel bowl, transparent water tank, filter tray) with mild soap and water. Rinse thoroughly to remove all soap residue.
  4. Pumpe reinigen: Disassemble the pump and clean any hair or debris from the impeller and pump housing. Use a small brush if necessary.
  5. Spülfilter: Rinse the activated carbon filter and pump filter sponge under running water. Note: The activated carbon filter should be replaced every 2-4 weeks, or more frequently if multiple pets use the fountain.
  6. Zusammenbauen: Reassemble all components and refill with fresh water.
Hand rinsing stainless steel bowl of FEELNEEDY FN-W23 Cat Drinking Fountain

Image: A hand rinsing the stainless steel drinking bowl under a faucet, demonstrating the ease of cleaning.

6.3 Filterwechsel

Replace the activated carbon filter every 2 to 4 weeks. Replace the pump filter sponge every 1-2 months, or when it appears heavily soiled.

7. Fehlerbehebung

ProblemMögliche UrsacheLösung
Brunnen funktioniert nichtNo power; Pump clogged; Water level too lowCheck power connection; Clean pump and impeller; Refill water to MAX line
Schwacher WasserflussPump clogged; Filter needs cleaning/replacementClean pump and impeller; Clean or replace activated carbon filter and pump sponge
Übermäßiger LärmWater level too low; Pump not properly seated; Debris in pumpRefill water; Ensure pump is securely placed; Clean pump and impeller
Das Wasser schmeckt/riecht schlechtDer Filter muss ausgetauscht werden; der Brunnen muss gereinigt werden.Replace activated carbon filter; Perform thorough weekly cleaning

8. Spezifikationen

  • Modell: FN-W23
  • Marke: Fühl dich bedürftig
  • Kapazität: 3 Liter
  • Material: Polypropylene (PP) water tank, 304 Stainless Steel drinking bowl
  • Farbe: Schwarz
  • Produktabmessungen: 22.8L x 22.8B x 12.4H Zentimeter
  • Artikelgewicht: 0.72 Kilogramm
  • Energiequelle: Kabelgebundener Strom (USB)
  • Bandtage: 5 Volt (DC)
  • Recommended Power Adapter: 5V/1A USB (not included)
  • Haustierart: Cat & Small Dog
  • Verwendung im Innen- und Außenbereich: Nur für den Innenbereich
  • Besonderheit: Stainless steel drinking bowl, quiet operation, multi-layer filtration, transparent water tank

9. Garantie und Support

FEELNEEDY products are manufactured with quality and care. For warranty information or technical support, please refer to the contact details provided on your purchase receipt or visit the official FEELNEEDY webBitte bewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.

For assistance, please contact FEELNEEDY customer service.

© 2026 FEELNEEDY. Alle Rechte vorbehalten.