1. Produktüberschreitungview
The AMZCNC 18V Cordless Pro Press Tool Kit (Model CZ-1930) is designed for creating secure and consistent press connections in both copper and ASTM F1807 PEX plumbing systems. This tool is suitable for residential and commercial plumbing applications, offering a reliable alternative to traditional soldering or crimping methods.
Hauptmerkmale:
- Professional Press Compatibility: Designed for copper and ASTM F1807 PEX press systems.
- Zuverlässige Verbindungen: Engineered for uniform crimping force to ensure leak-free, dependable connections.
- Schnelle Bedienung: 18V brushless motor completes presses in approximately 3 seconds.
- Breite Kompatibilität: Includes dies for 1/2", 3/4", 1" copper and 3/8"–1" ASTM F1807 PEX.
- Ergonomisches Design: Features an ergonomic grip and a 180° rotatable head for ease of use in various situations.
The complete AMZCNC 18V Cordless Pro Press Tool Kit, including the main tool, two 18V lithium-ion batteries, a charger, and a selection of press dies, all organized within a durable carrying case.
2. Sicherheitshinweise
Lesen und verstehen Sie stets alle Sicherheitshinweise, Anweisungen, Abbildungen und technischen Daten, die diesem Elektrowerkzeug beiliegen. Die Nichtbeachtung der unten aufgeführten Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.
Allgemeine Sicherheitshinweise:
- Tragen Sie geeignete persönliche Schutzausrüstung (PSA), einschließlich Schutzbrille, Handschuhe und Gehörschutz.
- Halten Sie Ihren Arbeitsbereich sauber und gut beleuchtet. Unordnung oder dunkle Bereiche führen zu Unfällen.
- Betreiben Sie Elektrowerkzeuge nicht in explosionsgefährdeten Bereichen, in denen sich beispielsweise brennbare Flüssigkeiten, Gase oder Staub befinden.
- Halten Sie Kinder und andere Personen während der Benutzung des Elektrowerkzeugs fern. Durch Ablenkung können Sie die Kontrolle verlieren.
- Ensure the tool is switched off and the battery is removed before making any adjustments, changing accessories, or storing power tools.
Verwendung und Pflege des Akkuwerkzeugs:
- Laden Sie nur mit dem vom Hersteller angegebenen Ladegerät auf.
- Verwenden Sie Elektrowerkzeuge nur mit dafür vorgesehenen Akkupacks.
- Wenn der Akku nicht verwendet wird, halten Sie ihn von anderen Metallgegenständen fern, die eine Verbindung zwischen den beiden Polen herstellen könnten.
- Bei unsachgemäßer Handhabung kann Flüssigkeit aus der Batterie austreten. Vermeiden Sie den Kontakt. Bei versehentlichem Kontakt mit Wasser spülen. Wenn Flüssigkeit in die Augen gelangt, suchen Sie zusätzlich ärztliche Hilfe auf.
WARNUNG: Always ensure the pressure release knob is correctly operated as per instructions to prevent injury or damage to the tool. Refer to the tool's warning labels for additional safety information.
3. Produktkomponenten
The AMZCNC 18V Cordless Pro Press Tool Kit includes the following items:
- 1 x Hydraulic Body (Main Press Tool)
- 1 x Jaw (Pre-installed or separate)
- 11 x Crimp Dies (Various sizes for Copper and PEX)
- 2 x 18 V Lithium-Ionen-Batterien
- 1 x Ladegerät
- 1 x Tragetasche
Included Dies:
A visual representation of the 11 included US standard press dies. These dies are compatible with ASTM F1807 PEX (3/8", 1/2", 5/8", 3/4", 1"), ASTM F877 PEX (1/2", 3/4", 1"), and Copper Pipe (1/2", 3/4", 1").
Batterien und Ladegerät:
This image shows the two 18V 5.0Ah Lithium-Ion batteries and the dedicated charger included with the AMZCNC Pro Press Tool Kit.
4. Einrichtung
4.1 Laden des Akkus
- Schließen Sie das Ladegerät an eine normale Steckdose an.
- Slide the 18V Lithium-Ion battery onto the charger until it clicks into place.
- Allow the battery to charge fully. The charger's indicator light will show the charging status (refer to charger manual for specific light patterns).
- Sobald der Akku geladen ist, entnehmen Sie ihn aus dem Ladegerät.
4.2 Installing Press Dies
- Stellen Sie sicher, dass das Gerät ausgeschaltet und der Akku entfernt ist.
- Open the tool's jaw by pressing the release mechanism.
- Select the appropriate die size for your pipe and fitting.
- Insert the chosen dies into the jaw, ensuring they are seated correctly and securely.
- Close the jaw until the dies are held firmly in place.
A three-step visual guide demonstrating how to install the press dies. The steps include opening the tool's jaw, carefully inserting the desired die, and ensuring it is securely in place for operation.
4.3 Anbringen der Batterie
- Align the charged battery with the battery port on the tool's handle.
- Slide the battery into place until it clicks, indicating a secure connection.
5. Bedienungsanleitung
5.1 Vorbereitung der Rohre und Formstücke
- Cut the pipe to the desired length, ensuring a clean, square cut.
- Deburr the inside and outside edges of the pipe.
- Clean the pipe and fitting surfaces to remove any dirt, grease, or debris.
- Insert the pipe fully into the fitting. Ensure the pipe is seated against the stop inside the fitting.
5.2 Performing a Press Connection
- Open the tool's jaw and position it around the fitting, ensuring the dies are centered over the fitting's crimp ring.
- Close the jaw securely around the fitting.
- Wichtig: Locate the pressure release knob (often a rotary knob or lever) on the tool. Turn this knob to the "engage" or "pressure build" position. This allows the hydraulic pressure to build during the crimping process.
- Press and hold the trigger to initiate the pressing cycle. The tool will apply pressure, crimping the fitting.
- Continue holding the trigger until the tool completes its cycle and the dies fully close around the fitting. The tool may make a high pinging noise as it reaches full pressure; this is normal.
- Once the crimp is complete, release the trigger.
- Wichtig: Turn the pressure release knob to the "release" position to relieve the hydraulic pressure. This will allow the dies to retract and the jaw to open.
- Remove the tool from the crimped fitting.
- Inspect the crimped connection to ensure it is uniform and secure.
Bedienungsvideos:
This video demonstrates the AMZCNC 18V Pro Press Tool creating a secure, leak-free connection on a pipe. It shows the process of positioning the tool and completing a press.
This video illustrates the fast operation of the AMZCNC 18V Cordless Plumbing Press Tool, showcasing its use with both copper and PEX dies to form quick and reliable connections.
6. Wartung
Regular maintenance ensures the longevity and optimal performance of your AMZCNC Pro Press Tool.
6.1 Reinigung
- After each use, wipe down the tool and dies with a clean, dry cloth to remove any debris or moisture.
- Ensure no foreign objects are lodged in the jaw mechanism or around the dies.
6.2 Schmierung
- Periodically apply a small amount of hydraulic oil or a suitable lubricant to the moving parts of the jaw and the hydraulic piston. Consult the manufacturer for specific lubrication points if not clearly indicated.
- This helps maintain smooth operation and prevents wear.
6.3 Speicherung
- Store the tool, batteries, and charger in the provided carrying case in a dry, cool place, away from direct sunlight and extreme temperatures.
- Vor der Lagerung den Akku aus dem Gerät entfernen.
Wartungszyklus: The tool is designed for a maintenance cycle of approximately 10,000 presses. Regular inspection and lubrication are recommended to extend tool life.
7. Fehlerbehebung
If you encounter issues with your AMZCNC Pro Press Tool, refer to the following common troubleshooting steps:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Tool does not operate or press. | Die Batterie ist nicht geladen oder nicht richtig eingesetzt. | Stellen Sie sicher, dass der Akku vollständig geladen und fest angeschlossen ist. |
| Incomplete press or weak crimp. | Incorrect die size; pressure release knob not engaged; low battery. | Verify correct die size. Ensure pressure release knob is in the "engage" position. Charge battery. |
| Tool makes a high pinging noise during operation. | Normal operation when reaching full pressure. | This is a normal sound indicating the tool is reaching its maximum crimping force. No action required. |
| Dies do not retract after pressing. | Pressure release knob not turned to "release" position. | Turn the pressure release knob to the "release" position to relieve hydraulic pressure. |
Sollten die Probleme nach Durchführung dieser Schritte weiterhin bestehen, wenden Sie sich bitte an den Kundendienst.
8. Spezifikationen
| Spezifikation | Detail |
|---|---|
| Marke | AMZCNC |
| Modellnummer | CZ-1930 |
| Artikelgewicht | 9.16 kg |
| Griffmaterial | Kohlenstoffstahl |
| Grifftyp | Ergonomisch |
| Anzahl der Artikel | 2 (Tool + Jaw) |
| Im Lieferumfang enthaltene Komponenten | 11 Crimp dies, 2 Battery, Hydraulic body, Jaw, charger |
| Spezifische Verwendungen | Residential plumbing, commercial plumbing, water line installations, HVAC systems, gas pipe repairs |
| Size (Dies) | 1/2", 3/4", 1" (Copper), 3/8", 1/2", 5/8", 3/4", 1" (PEX) |
| Grifftyp | Rotating, Ergonomic |
| Spezifikation erfüllt | ASTM F877 |
| Crimpbereich | PEX 3/8"-1", Copper Pipe 1/2"-1" |
| Crimpkraft | 80 KN |
| Schlaganfall | 19 MM |
| Wartungszyklus | 10,000 MAL |
This image displays the technical specifications of the AMZCNC Pro Press Tool, detailing its model number (HT-1930), crimping range for PEX (3/8"-1") and Copper (1/2"-1"), crimping force (80 KN), stroke (19 MM), packaging details, and a maintenance cycle of 10,000 times.
9. Garantie und Support
9.1 Garantieinformationen
The AMZCNC 18V Cordless Pro Press Tool Kit typically comes with a ein Jahr Garantie Diese Garantie gilt ab Kaufdatum und deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
Note: Warranty terms may vary. Refer to the specific warranty documentation included with your product or contact the manufacturer directly for the most accurate and up-to-date information.
9.2 Kundendienst
For technical assistance, replacement parts, or warranty inquiries, please contact AMZCNC customer support through their official website or the retailer from whom the product was purchased. When contacting support, please have your model number (CZ-1930) and purchase date available.