RAB Lighting B17 LED-Pollerleuchte – Bedienungsanleitung

1. Einleitung

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Zu den Hauptmerkmalen gehören:

• Energy-efficient LED with a 50,000-hour lifespan.
• Einstellbare Watttage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• UL-gelistet für Nassbereiche.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Sicherheitshinweise

WARNUNG: Risk of electric shock. Disconnect power before installation or servicing. Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

• Sicherstellung der Versorgungsvoltage is correct for the fixture.
• Do not handle live components.
• Tragen Sie geeignete persönliche Schutzausrüstung (PSA).
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Die Leuchte darf nicht verändert werden. Jegliche Veränderungen können zum Erlöschen der Garantie und zu Sicherheitsrisiken führen.

3. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Bedienungsanleitung (dieses Dokument)

4. Einrichtung und Installation

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Bereiten Sie den Installationsort vor: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Stromversorgung trennen: Vor Beginn jeglicher Elektroarbeiten muss die Stromzufuhr am Sicherungsautomaten unterbrochen werden.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Elektrische Verbindungen herstellen: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Stellen Sie sicher, dass alle Verbindungen sicher und isoliert sind.
5. Wählen Sie Wattage und CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Strom wiederherstellen: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Bedienungsanleitung

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24W: Maximale Helligkeit.
• 19W: Medium brightness, reduced energy use.
• 14W: Lower brightness, maximum energy savings.

So passen Sie es an: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Wählbare Farbtemperatur (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

So passen Sie es an: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0-10V Dimming

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Wartung

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Reinigung: Reinigen Sie die Außenseite der Leuchte regelmäßig mit einem weichen, fusselfreien Tuch.amp Mit einem Tuch Schmutz und Ablagerungen entfernen. Keine Scheuermittel oder Lösungsmittel verwenden. Vor der Reinigung sicherstellen, dass das Gerät ausgeschaltet ist.
• Inspektion: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• LED-Ersatz: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Fehlerbehebung

8. Spezifikationen

9. Garantie und Support

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webDie genauen Garantiebedingungen und Kontaktdaten finden Sie auf der Website oder in Ihren Kaufunterlagen.

RAB Lighting Contact: www.rablighting.com