HORLAT TP-01

HORLAT Projector Tripod Stand TP-01 User Manual

Modell: TP-01

Einführung

Thank you for choosing the HORLAT Projector Tripod Stand TP-01. This stand is specifically designed to provide stable and adjustable support for your HORLAT W10/W11 projectors. It features a 180° rotational capability, allowing for flexible projection angles. Please read this manual carefully before use to ensure proper installation and operation.

Note: This product is a projector stand. The projector itself is not included.

Wichtige Sicherheitsinformationen

  • Stellen Sie sicher, dass der Ständer auf einer stabilen, ebenen Fläche steht, um ein Umkippen zu verhindern.
  • Do not overload the stand beyond its intended capacity. This stand is designed for HORLAT W10/W11 projectors only.
  • Keep the stand away from heat sources, direct sunlight, and moisture.
  • Do not attempt to modify or disassemble the stand.
  • Zur Vermeidung von Unfällen außerhalb der Reichweite von Kindern aufbewahren.

Packungsinhalt

Bitte prüfen Sie das Paket auf folgende Artikel:

  • HORLAT Projector Tripod Stand TP-01
  • Adapter

Note: The term "Adapter" is listed in the product's package contents. This may refer to a specific mounting adapter for the projector.

Produkt überview

The HORLAT TP-01 stand is designed for ease of use and stability. It features a sturdy base and a rotatable platform for your projector.

HORLAT Projector Tripod Stand TP-01

Image: The HORLAT Projector Tripod Stand TP-01, showcasing its sleek design and stable structure.

HORLAT Projector Stand Rotation Mechanism

Image: Diagram illustrating the 90-degree and 45-degree rotation capabilities of the projector stand's platform.

Installationsanweisungen

  1. Den Ständer auspacken: Entnehmen Sie vorsichtig alle Komponenten aus der Verpackung.
  2. Platzieren Sie den Ständer: Position the stand on a flat, stable surface where you intend to use your projector. Ensure there is enough space for the projector and its cables.
  3. Mount the Projector: Gently place your HORLAT W10 or W11 projector onto the stand's platform. Ensure it is centered and stable.
    Projector mounted on HORLAT TP-01 stand

    Image: A HORLAT projector securely placed on the TP-01 stand, demonstrating proper mounting.

  4. Kabel anschließen: Connect all necessary power and video cables to your projector. Route cables neatly to avoid obstruction or tripping hazards.

Bedienung des Standes

The HORLAT TP-01 stand allows for easy adjustment of your projector's position and angle.

  1. Drehrichtung einstellen: The projector platform can be rotated up to 180 degrees. Gently hold the projector and rotate the platform to achieve the desired projection angle. The stand is designed to hold the projector securely at various angles.
    HORLAT Projector Stand 90-degree rotation

    Image: Diagram showing the 90-degree rotation capability of the projector stand, allowing for versatile positioning.

  2. Positionierung: Once the desired angle is set, ensure the stand remains stable. The design allows for flexible placement on various surfaces while maintaining stability.

Wartung

  • Reinigung: To clean the stand, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
  • Lagerung: When not in use, store the stand in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Inspektion: Periodically check the stand for any signs of wear or damage. If any damage is found, discontinue use and contact customer support.

Fehlerbehebung

Problem Mögliche Ursache Lösung
Der Ständer ist instabil. Uneven surface; projector not centered. Place the stand on a flat, level surface. Ensure the projector is centered on the platform.
Difficulty rotating the platform. Excessive force applied; obstruction. Ensure no cables or other objects are obstructing the rotation. Apply gentle, even pressure. Do not force rotation.
Stand appears damaged. Physische Einwirkung; Herstellungsfehler. Discontinue use immediately. Contact HORLAT customer support for assistance.

Technische Daten

Besonderheit Detail
Marke Horlat
Modellnummer TP-01
Kompatible Geräte HORLAT W10/W11 Projectors
Montagetyp Tripod (Desktop Stand)
Besonderheit 180° Rotational Platform
Garantie 1 Jahre Herstellergarantie

Garantie und Kundendienst

The HORLAT Projector Tripod Stand TP-01 comes with a 1 Jahre Herstellergarantie. Diese Garantie deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab.

For warranty claims, technical support, or any questions regarding your product, please contact HORLAT customer service through the retailer where you purchased the product or visit the official HORLAT webWebsite für Kontaktinformationen.

Please have your model number (TP-01) and proof of purchase ready when contacting support.