Einführung
Thank you for choosing the WOLTU BTS26sz Height Adjustable Coffee Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before use and retain them for future reference.
The WOLTU BTS26sz coffee table features a versatile lift-top design with a gas lift mechanism, allowing the tabletop to be easily raised for use as a temporary workspace or dining surface. It includes both hidden and open storage compartments to help keep your living space organized. Constructed from high-quality E1 particle board with a water-repellent melamine veneer, this table is designed for stability and durability. Assembly is straightforward with clearly illustrated instructions and numbered components.
Image: Key features of the WOLTU BTS26sz coffee table, including E1 Class Panels, tilting table legs, non-slip feet, and high ground clearance.
Sicherheitshinweise
- Vor der Montage sicherstellen, dass alle Teile vorhanden und unbeschädigt sind. Nicht verwenden, wenn Teile fehlen oder beschädigt sind.
- Montieren Sie das Produkt auf einer weichen, sauberen Oberfläche, um Kratzer zu vermeiden.
- Die Schrauben dürfen bei der Montage nicht zu fest angezogen werden, um eine Beschädigung des Materials zu vermeiden.
- Kleinteile und Verpackungsmaterialien von Kindern und Haustieren fernhalten, um Erstickungsgefahren zu vermeiden.
- Stehen oder sitzen Sie nicht auf dem Tisch.
- Distribute weight evenly on the tabletop and within storage compartments. Do not exceed the maximum weight capacities.
- When lifting or lowering the tabletop, ensure hands and fingers are clear of the mechanism to prevent pinching.
- Überprüfen Sie regelmäßig alle Befestigungselemente, um sicherzustellen, dass sie fest sitzen.
Ersatzteilliste
Please verify that all components are included before beginning assembly. Refer to the assembly diagram for specific part identification.
Image: Technical diagram illustrating the dimensions of the WOLTU BTS26sz coffee table, including height adjustments and storage compartment measurements.
Notiz: The actual number of small parts may vary slightly. If any parts are missing or damaged, please contact customer support.
Einrichtung und Montage
Assembly is required for this product. Follow the numbered steps provided in the included assembly instructions. It is recommended to have two people for assembly.
- Komponenten auspacken: Carefully remove all parts from the packaging. Place them on a soft, clean surface (e.g., a carpet or blanket) to prevent scratches.
- Teile identifizieren: Match each component with the corresponding labels in the assembly diagram.
- Grundstruktur zusammenbauen: Begin by attaching the legs to the main base frame using the provided screws and tools. Ensure all connections are secure but do not overtighten initially.
- Einbau von Staufächern: Attach the side panels and internal dividers to form the storage areas.
- Hubmechanismus anbringen: Secure the gas lift mechanism to the main body and the underside of the tabletop. Follow the specific instructions for aligning and fastening the mechanism.
- Tischplatte anbringen: Carefully place the tabletop onto the lift mechanism and secure it according to the instructions.
- Abschließendes Anziehen: Once all parts are assembled, gently tighten all screws and fasteners to ensure stability. Do not force or overtighten.
Eine detaillierte visuelle Anleitung finden Sie in der bebilderten Montageanleitung, die Ihrer Verpackung beiliegt.
Bedienungsanleitung
Lift-Top-Funktionalität
Image: Close-up of the WOLTU BTS26sz coffee table's lift-top mechanism, showing the gas lift for stable, quiet operation and the cutout handles for easy lifting.
- Zum Anheben der Tischplatte: Gently pull the tabletop upwards using the cutout handles. The gas lift mechanism will assist in a smooth and controlled ascent. Continue lifting until it reaches the desired height or its maximum extension (approximately 57 cm from the floor).
- So senken Sie die Tischplatte ab: Apply gentle downward pressure on the tabletop while holding the cutout handles. The gas lift mechanism will allow for a controlled descent. Guide the tabletop back into its closed position (approximately 43 cm from the floor).
Vorsicht: Keep hands and fingers clear of the lifting mechanism and edges of the tabletop during operation to avoid injury.
Lagerfächer
Image: WOLTU BTS26sz coffee table with its lift-top open, showcasing the large internal storage compartment filled with books, a laptop, and other items.
- Versteckter Speicher: The compartment under the lift-top is ideal for storing items you wish to keep out of sight, such as remote controls, magazines, or small electronics.
- Fach öffnen: The open shelf provides easy access storage for blankets, books, or decorative items.
Ensure items placed in storage do not obstruct the lift mechanism when closing the tabletop.
Wartung und Pflege
- Reinigung: Wischen Sie die Tischoberflächen mit einem weichen, fusselfreien Tuch ab.amp Mit einem Tuch reinigen. Vermeiden Sie aggressive Chemikalien, Scheuermittel oder übermäßige Feuchtigkeit, da diese das Melaminfurnier beschädigen können.
- Verschüttungen: Verschüttete Flüssigkeiten sollten sofort aufgewischt werden, um Fleckenbildung oder Beschädigungen der Oberfläche zu vermeiden.
- Befestigungsmaterial: Periodically check all screws and bolts to ensure they are tight. Retighten as necessary, but do not overtighten.
- Hitze und Feuchtigkeit: Avoid placing hot items directly on the surface. Use coasters for drinks to prevent water rings. Keep the table away from direct sunlight and heat sources to prevent warping or discoloration.
- Bewegung: Heben Sie den Tisch beim Verschieben an, anstatt ihn zu ziehen, um Beschädigungen an den Tischbeinen und am Boden zu vermeiden.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Tisch wirkt nach dem Zusammenbau wackelig. | Schrauben oder Befestigungselemente sind nicht vollständig festgezogen. | Carefully check and tighten all screws and bolts. Ensure the table is on a level surface. |
| Der Hubmechanismus des Verdecks ist schwergängig oder schwierig zu bedienen. | Der Mechanismus benötigt möglicherweise Schmierung oder ist verstopft. | Ensure no items are obstructing the mechanism. Apply a small amount of silicone-based lubricant to the moving parts of the gas lift if necessary. |
| Tabletop does not close flush. | Items in hidden storage are too tall or mechanism is misaligned. | Remove any obstructing items from the hidden compartment. Check the alignment of the lift mechanism and re-adjust if possible (refer to assembly instructions). |
| Oberflächenkratzer oder Flecken. | Scharfe Gegenstände oder abrasive Reinigungsmittel. | Use soft cloths for cleaning. Avoid dragging objects across the surface. Minor scratches may be concealed with furniture repair pens (not included). |
If you encounter issues not listed here or require further assistance, please contact WOLTU customer support.
Technische Daten
- Marke: WOLTU
- Modell: BTS26sz
- Farbe: Schwarz
- Material: Holzwerkstoff, Metall
- Gesamtabmessungen (L x B x H): 100 x 50 x 43 cm (lowered) / 100 x 50 x 57 cm (lifted)
- Interior Storage Dimensions (L x W x H): 65 x 46.5 x 19 cm
- Artikelgewicht: 18.8 kg
- Maximale Gewichtskapazität: Total 50 kg (Tabletop: 30 kg, Storage Compartment: 20 kg)
- Rahmenmaterial: Holzwerkstoff
- Top-Materialtyp: Holzwerkstoff mit Melaminfurnier
- Pflegehinweise: Mit Anzeige löschenamp Tuch
- Empfohlene Verwendung: Reading, Temporary Workspace, Dining
- Form: Rechteckig
Garantie und Support
WOLTU products are designed for quality and durability. For information regarding warranty coverage, please refer to the documentation included with your purchase or visit the official WOLTU webWebsite.
If you require assistance with assembly, have questions about product functionality, or need to report a missing/damaged part, please contact WOLTU customer support. Contact details can typically be found on the WOLTU webauf der Website oder auf Ihrer Kaufrechnung.
Online-Hilfe: Besuchen Sie den WOLTU-Shop auf Amazon.