1. Sicherheitshinweise
Bitte lesen Sie diese Anweisungen vor der Installation und Inbetriebnahme sorgfältig durch. Bewahren Sie diese Anleitung zum späteren Nachschlagen auf.
- Elektrische Sicherheit: Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off the main power supply before installation, maintenance, or repair.
- Bandtage: This product operates on AC 85V-265V. Ensure your power supply matches this requirement.
- Wasserbeständigkeit: The light fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use, avoid submerging it in water.
- Einbauhöhe: For optimal motion detection, install the light at a height of approximately 1.8 to 2.5 meters (5.9 to 8.2 feet).
- Betriebstemperatur: Ensure the operating environment is within the specified temperature range to prevent damage.
2. Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- DELIPOP LED Wall Light (2 units)
- Montagezubehör (Schrauben, Dübel)
- Bedienungsanleitung
3. Produktmerkmale
- Integrierter Bewegungssensor: Detects movement within 3 to 8 meters (10 to 26 feet) at a 120° angle.
- Automatische Operation: Light turns on automatically at night when motion is detected and turns off approximately 15 seconds after no motion is detected.
- Energieeffiziente LED: 24W power consumption with a long lifespan of over 50,000 hours.
- Warmweiße Beleuchtung: 3000K color temperature for a comfortable and inviting ambiance.
- Langlebige Konstruktion: Made from die-cast aluminum alloy body and PC lampshade, resistant to rust, yellowing, high temperatures, and impacts.
- IP65 Wasserdicht: Konzipiert für den Außeneinsatz, beständig gegen verschiedene Witterungsbedingungen.
Figure 3.1: Product dimensions and key components including high-quality LED chip, die-cast aluminum lamp body, and PIR motion sensor.
4. Spezifikationen
| Attribut | Wert |
|---|---|
| Marke | DELIPOP |
| Modell | 24W LED Wall Light with Motion Sensor |
| Abmessungen (L x B x H) | 29 x 10 x 9 cm (11.41 x 3.93 x 3.54 Zoll) |
| Gewicht | 1.8 Kilograms (per unit, for 2 units) |
| Bandtage | Wechselstrom 85 V-265 V |
| Leistung | 24 Watt |
| Lichtstrom | 2370 Lumen |
| Farbtemperatur | 3000K Warmweiß |
| Material | Aluminium, Polycarbonat (PC) |
| Wasserdichtigkeit | IP65 |
| Bewegungssensorwinkel | 120° |
| Reichweite des Bewegungssensors | 3-8 Meter (10-26 Fuß) |
| Automatische Abschaltverzögerung | Approx. 15 seconds (after no motion) |
| Lebensdauer | > 50,000 Stunden |
| Energieeffizienzklasse | E |
Figure 4.1: EU Energy Efficiency Label for the DELIPOP light. For more details, refer to the EPREL-Datenbank (QR-Code-Link).
5. Installationsanleitung
Wichtig: Always ensure the main power supply is turned off before starting installation. It is recommended to have this product installed by a professional electrician.
- Bereiten Sie den Installationsbereich vor: Choose a suitable wall location, ideally between 1.8 to 2.5 meters (5.9 to 8.2 feet) high, for optimal motion sensor performance. Ensure the surface is clean and stable.
- Bohrpunkte markieren: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the wall.
- Bohrlöcher: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall anchors if necessary.
- Verkabelung anschließen: Carefully connect the household electrical wires to the light fixture's wires. Ensure correct polarity (Live, Neutral, Ground) according to local electrical standards. Use appropriate wire connectors and ensure all connections are secure and insulated.
- Montieren Sie die Vorrichtung: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached and stable.
- Strom wiederherstellen: Once installation is complete and all connections are secure, turn the main power supply back on.
Abbildung 5.1: Bspample of the DELIPOP wall light installed on an exterior wall.
6. Bedienungsanleitung
The DELIPOP LED wall light features an integrated motion sensor for automatic operation.
- Tagesbetrieb: During daylight hours, the light will remain off to conserve energy, even if motion is detected.
- Nachtbetrieb: When it is dark, the motion sensor becomes active. If motion is detected within its 3-8 meter range and 120° angle, the light will automatically turn on.
- Automatische Abschaltung: The light will remain on as long as continuous motion is detected. Approximately 15 seconds after no motion is detected, the light will automatically turn off.
Figure 6.1: Visual representation of the motion sensor's operational cycle, including daytime standby, nighttime activation, and automatic deactivation.
7. Pflege und Wartung
Regular cleaning and proper care will ensure the longevity and optimal performance of your DELIPOP wall light.
- Reinigung: Vor der Reinigung die Stromzufuhr unterbrechen. Die Leuchte mit einem weichen, feuchten Tuch abwischen.amp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel, Lösungsmittel oder aggressive Chemikalien, da diese die Oberfläche oder die Bauteile beschädigen können.
- Inspektion: Überprüfen Sie die Leuchte regelmäßig auf Beschädigungen, lose Verbindungen oder Verschleiß. Sollten Sie Mängel feststellen, wenden Sie sich an einen qualifizierten Elektriker.
- LEDs: The integrated LED light source is designed for a long lifespan and is not user-replaceable.
Figure 7.1: The DELIPOP wall light is designed to be IP65 waterproof and resistant to cold weather conditions.
8. Fehlerbehebung
If you encounter issues with your DELIPOP wall light, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht geht nachts nicht an. | 1. Keine Stromversorgung. 2. Sensor obstructed or faulty. 3. Still too bright (daylight sensor active). | 1. Check power connections and circuit breaker. 2. Ensure sensor is clean and unobstructed. Test sensor by waving hand. 3. Wait until it is sufficiently dark. |
| Licht bleibt dauerhaft an. | 1. Kontinuierliche Bewegung erkannt. 2. Sensor faulty. | 1. Ensure no constant movement (e.g., swaying branches, pets) is within sensor range. 2. Contact customer support if problem persists after checking for motion. |
| Das Licht flackert oder wird schwächer. | 1. Instabile Stromversorgung. 2. Lose Kabelverbindung. | 1. Lassen Sie die Stromversorgung von einem Elektriker überprüfen. 2. Turn off power and check all wiring connections. Re-secure if loose. |
9. Garantie und Support
DELIPOP is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LED wall light, please contact DELIPOP customer service through your purchase platform.
Die genauen Garantiebedingungen entnehmen Sie bitte Ihrer Kaufdokumentation.