BSIDE O7 Portable Digital Oscilloscope Multimeter Signal Generator User Manual

1. Einleitung

The BSIDE O7 is a versatile 3-in-1 handheld device combining a digital oscilloscope, a True RMS (TRMS) multimeter, and a signal generator. Designed for professionals and enthusiasts, it offers a wide range of measurement capabilities and signal generation functions in a compact, portable form factor. This manual provides detailed instructions for the safe and effective use of your BSIDE O7 device.

2. Produktüberschreitungview

The BSIDE O7 integrates three essential functions into one robust unit:

• Digitales Oszilloskop: Features a 25MHz bandwidth and 208MSa/s real-time sampling rate for accurate waveform analysis.
• TRMS Multimeter: Provides precise measurements for AC/DC voltage, current, resistance, capacitance, temperature, continuity, and diode testing.
• Signalgenerator: Capable of outputting 7 different waveform types with adjustable frequency and ampBreite.

Key features include a large 3.98-inch full-view TFT color screen for clear readings, a 5000mAh rechargeable battery offering extended operation, and intelligent protection against burn-in and overloads. The device is housed in a full-body soft silicone case for enhanced durability and protection.

Figure 2.1: The BSIDE O7 functions as a 3-in-1 device, combining an oscilloscope, multimeter, and signal generator.

Figure 2.2: The BSIDE O7 features a large 3.98-inch TFT LCD for clear display of measurements and waveforms.

Figure 2.3: The device is equipped with a 5000mAh rechargeable battery, providing extended operational time.

3. Packungsinhalt

Bitte überprüfen Sie nach Erhalt den Paketinhalt, um sicherzustellen, dass alle Artikel vorhanden sind:

• BSIDE O7 Oscilloscope Unit
• BNC Oscilloscope Probe (x1)
• BNC to Alligator Clip Probe (x1)
• Multimeter Test Leads (1 pair)
• Color Rings (x8)
• Thermoelement Typ K
• USB-Kabel Typ C.
• Tragetasche mit Reißverschluss
• Alignment Screwdriver
• Englisches Benutzerhandbuch

Figure 3.1: The BSIDE O7 and its complete set of accessories, including probes, test leads, and carrying case.

4. Einrichtung

4.1 Aufladen des Geräts

Before initial use, fully charge the BSIDE O7 using the provided USB Type-C charging cable. Connect the cable to the device's charging port and a standard USB power adapter (not included). The charging indicator will show the charging status. A full charge provides approximately 10 hours of continuous oscilloscope operation or up to 20 hours in multimeter mode.

4.2 Ein-/Ausschalten

Press and hold the power button (usually marked with a ⑂ symbol) for a few seconds to turn the device on or off. The device will boot up and display the main interface.

4.3 Initial Mode Selection

Upon powering on, the device typically defaults to the last used mode or a pre-set mode. Use the dedicated mode buttons or navigation controls to switch between Oscilloscope, Multimeter, and Signal Generator functions.

5. Bedienungsanleitung

5.1 Oszilloskopmodus

Die Oszilloskopfunktion ermöglicht die Visualisierung und Analyse elektrischer Signale.

• Bandbreite: 25 MHz
• Echtzeit-Sampling-Rate: 208 MSa / s
• Speichertiefe: 128 KB
• Eingangsimpedanz: 1MΩ @16pf
• Kupplung: Wechselstrom/Gleichstrom
• Horizontal Time Base: 100ns/div - 20s/div (Accuracy: 20ppm)
• Vertikale Empfindlichkeit: 20 mV/div - 10 V/div
• Maximale Eingangslautstärketage: ±300 V
• Automatischer Test: Measures period, frequency, amplitude, maximum, minimum, duty cycle, RMS value.
• Auslösemodus: Auto, Single, Normal
• Triggerflanke: Steigend/Fallend
• Anzeigemodi: YT, XY, Scroll
• Post-signal Period: Min, 500ms, 1s, 10s, Unlimited

Zu bedienen:

1. Connect the BNC oscilloscope probe to the CH1 or CH2 input.
2. Attach the probe to the circuit point you wish to measure.
3. Adjust the vertical sensitivity (Volts/Div) and horizontal time base (Time/Div) to properly display the waveform.
4. Use the trigger settings to stabilize the waveform on the screen.
5. Utilize the automatic measurement functions for quick parameter readings.

Figure 5.1: The BSIDE O7 features dual channels (CH1, CH2) for oscilloscope measurements and a dedicated DDS output.

Figure 5.2: The full-view LCD displays multiple waveforms simultaneously, aiding in comparative analysis.

5.2 Multimeter-Modus

The multimeter function provides accurate digital measurements for various electrical parameters.

• Anzeige: 6000 counts, 3.98-inch TFT full screen
• DC-Voltage (mV): 60mV/600mV, 0.01mV/0.1mV resolution, ±(0.8%+3) accuracy
• DC-Voltage(V): 6.000V/60V/600V/1000V, 0.001V/0.01V/0.1V/0.1V resolution, ±(0.8%+3) accuracy
• AC-Lautstärketage (mV): 60mV/600mV, 0.01mV/0.1mV resolution, ±(1.0%+3) accuracy
• AC-Lautstärketage(V): 6.000V/60V/600V/750V, 0.001V/0.01V/0.1V/1V resolution, ±(1.0%+3) accuracy
• ACV Frequency: 40-1000 Hz
• DC Current (mA): 60.00mA/600mA, 0.01mA/0.1mA resolution, ±(1.0%+3) accuracy
• AC Current (mA): 60.00mA/600mA, 0.01mA/0.1mA resolution, ±(1.2%+5) accuracy
• Widerstand: 600Ω/6kΩ/60KΩ/600KΩ/6MΩ/60MΩ, 0.1Ω resolution, ±(1.2%+5) accuracy
• Kapazität: 999.9nF/9.999µF/999.9µF/9.999mF/99.99mF, 0.1nF resolution, ±(4.5%+5) accuracy
• Temperatur: -20~1000°C / -4~1832°F, 1°C/1°F resolution, ±(2.5%+5) accuracy
• Kontinuität: Ja
• Diode: Ja
• Flexibler Stromkreisamp (Optional): Supports AC current up to 600.0A/6000A with 0.1A/1A resolution, ±(1.0%+5) accuracy (Standard Rogowski Coil: 100mV@1000V, 50Hz).

Zu bedienen:

1. Connect the multimeter test leads to the appropriate input jacks (COM, VΩmA, or 6000A for Rogowski coil).
2. Select the desired measurement function (e.g., DCV, ACV, Resistance) using the mode button.
3. Apply the test leads to the circuit or component under test.
4. Lesen Sie den Messwert auf dem Display ab.

Figure 5.3: The BSIDE O7 is suitable for various applications, including automotive maintenance, demonstrating its multimeter function.

5.3 Signalgeneratormodus

The signal generator produces various waveforms for testing and calibration purposes.

• Wellenformtypen: Sine, Square, Triangle, Half-wave, Full-wave, Ramp, DC
• Frequenzbereich: 0 Hz – 2 MHz
• AmpBreite: 0.1 V - 3 V
• Mindestauflösung: 1 Hz
• Square Wave Duty Cycle: 1 % - 99 %

Zu bedienen:

1. Select the Signal Generator mode.
2. Choose the desired waveform type.
3. Stellen Sie die Frequenz ein und amplitude using the device controls.
4. Connect the BNC to alligator clip probe to the signal output port and to the circuit requiring the signal.

6. Wartung

6.1 Allgemeine Pflege

Keep the device clean and dry. Avoid exposure to extreme temperatures, humidity, or direct sunlight. The silicone case provides protection against minor impacts; however, avoid dropping the device.

Figure 6.1: The BSIDE O7 is protected by a full-body soft silicone case, offering enhanced durability.

6.2 Reinigung

Verwenden Sie ein weiches,amp cloth to clean the exterior of the device. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from any power source before cleaning.

6.3 Firmware-Updates

Überprüfen Sie regelmäßig die Herstellerangaben. website for available firmware updates. Firmware updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update package carefully.

7. Fehlerbehebung

If you encounter issues with your BSIDE O7, consider the following general troubleshooting steps:

• Gerät lässt sich nicht einschalten: Stellen Sie sicher, dass der Akku ausreichend geladen ist. Schließen Sie das Gerät an ein Ladegerät an und versuchen Sie es erneut.
• Ungenaue Messwerte: Check probe connections, ensure correct mode selection, and verify that the input range is appropriate for the measurement. Calibrate if necessary (refer to advanced settings or support).
• No waveform display: Verify probe connection, trigger settings, and vertical/horizontal scale. Ensure the signal source is active.
• Gerät reagiert nicht: Try performing a soft reset by holding the power button for an extended period (e.g., 10-15 seconds) or disconnecting and reconnecting the battery if accessible (consult support first).

For persistent issues, contact BSIDE customer support for assistance.

8. Spezifikationen

Allgemein

• Hersteller: BSIDE
• Modellnummer: O7 (Handheld Oscilloscope Multimeter)
• Abmessungen (L x B x H): 21.6 x 8.4 x 3.6 cm (8.5 x 3.3 x 1.4 Zoll)
• Gewicht: 477 Gramm (1.05 Pfund)
• Energiequelle: Batteriebetrieben (1 Lithium-Ionen-Akku im Lieferumfang enthalten)
• Farbe: Grün
• Zertifizierungen: CE-konform
• Anzeige: 3.98-inch TFT Full Screen

Oszilloskop

• Kanäle: 2
• Bandbreite: 25 MHz
• Echtzeit-Sampling-Rate: 208 MSa / s
• Speichertiefe: 128 KB
• Eingangsimpedanz: 1MΩ @16pf
• Kupplung: Wechselstrom/Gleichstrom
• Horizontal Time Base: 100 ns/div - 20 s/div
• Vertikale Empfindlichkeit: 20 mV/div - 10 V/div
• Max. Eingangslautstärketage: ±300 V
• Automatischer Test: Period, Frequency, Amplitude, Max, Min, Duty Cycle, RMS
• Auslösemodus: Auto, Single, Normal
• Triggerflanke: Steigend/Fallend
• Anzeigemodi: YT, XY, Scroll
• Post-signal Period: Min, 500ms, 1s, 10s, Unlimited

Multimeter

• Anzeigezähler: 6000
• DC-Voltage: 60mV/600mV/6V/60V/600V/1000V
• AC-Lautstärketage: 60mV/600mV/6V/60V/600V/750V (40-1000 Hz)
• Gleichstrom: 60.00MA / 600MA
• Wechselstrom: 60.00MA / 600MA
• Widerstand: 600Ω/6kΩ/60KΩ/600KΩ/6MΩ/60MΩ
• Kapazität: 999.9nF/9.999µF/999.9µF/9.999mF/99.99mF
• Temperatur: -20~1000 °C / -4~1832 °F
• Kontinuität: Ja
• Diodentest: Ja
• High Current Measurement (Optional Rogowski Coil): 600.0A/6000A AC

Signalgenerator

• Wellenformtypen: Sine, Square, Triangle, Half, Full, Ramp, DC
• Frequenz: 0 Hz – 2 MHz
• AmpBreite: 0.1 V - 3 V
• Mindestauflösung: 1 Hz
• Square Wave Duty Cycle: 1 % - 99 %

9. Garantie und Support

The BSIDE O7 comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BSIDE website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or inquiries regarding firmware updates, please contact BSIDE customer service through their official channels.