U UNNI Wireless Indoor/Outdoor Weather Station Thermometer

Einführung

Thank you for choosing the U UNNI Wireless Indoor/Outdoor Weather Station Thermometer. This device provides real-time indoor and outdoor temperature and humidity readings, along with a weather forecast, heat index, dew point, and mold index. Designed for ease of use and clear readability, it helps you stay informed about your environment.

Packungsinhalt

• Hauptanzeigeeinheit
• Außen-Fernbedienungssensor
• USB-Stromkabel (für das Hauptgerät)
• Bedienungsanleitung

Notiz: 3 x AAA batteries for the main unit and 2 x AA batteries for the remote sensor are nicht enthalten und muss separat erworben werden.

Aufstellen

1. Einlegen der Batterie

1. Hauptanzeigeeinheit: Open the battery compartment on the back of the main unit. Insert 3 x AAA batteries, ensuring correct polarity (+/-). Close the compartment. Alternatively, the main unit can be powered via the included USB cable.
2. Außenfernsensor: Open the battery compartment on the back of the remote sensor. Insert 2 x AA batteries, ensuring correct polarity (+/-). Close the compartment.

2. Sensorplatzierung

For optimal accuracy, place the outdoor remote sensor in a shaded area, away from direct sunlight and heavy rain. This prevents inaccurate temperature readings due to solar radiation or moisture. The sensor has a range of up to 330 feet (100 meters) from the main unit.

3. Pairing and Channel Selection

The main unit and remote sensor should automatically pair once both are powered on. If you are using multiple remote sensors (up to 3 supported), ensure each sensor is set to a different channel (1, 2, or 3) using the switch inside its battery compartment. Use the 'CHANNEL' button on the main unit to cycle through the sensor readings.

Image: Main Display Unit and Outdoor Remote Sensor.

Bedienungsanleitung

1. Anzeige überview

The main display unit features a large, clear, and backlit LCD screen that shows the following information:

• Außentemperatur und Luftfeuchtigkeit: Real-time readings from the remote sensor.
• Raumtemperatur und Luftfeuchtigkeit: Real-time readings from the main unit's internal sensor.
• Wettervorhersage: An icon indicating the predicted weather for the next 12 hours.
• Heat Index, Dew Point, Mold Index: Additional environmental data for all sensor locations.
• Temperaturtrendpfeile: Indicates rising, steady, or falling temperature.

2. Hintergrundbeleuchtungsfunktion

Tap the light bulb button on the top of the main unit to activate the backlight for 10 seconds. If the unit is powered via the USB cable, the backlight can be set to high, low, or off for continuous illumination.

3. Button Functions (Rear of Main Unit)

• WETTER: Adjusts the weather forecast symbol.
• DRUCK: Allows adjustment of the air pressure value for local conditions.
• GESCHICHTE: Displays historical pressure data.
• KANAL: Cycles through readings from multiple remote sensors (if connected).
• OBEN UNTEN: Used to adjust settings and values during configuration.

4. Auswahl der Temperatureinheit

Press the designated button (often 'UP' or 'DOWN' during setup, or a dedicated °C/°F button if available) to switch between Celsius (°C) and Fahrenheit (°F) temperature units.

Wartung

• Reinigung: Wischen Sie das Gerät und den Sensor mit einem weichen, fusselfreien Tuch ab.amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
• Batteriewechsel: Wechseln Sie die Batterien sowohl im Hauptgerät als auch im Fernsensor aus, sobald die Anzeige für niedrigen Batteriestand erscheint.
• Lagerung: If storing the device for an extended period, remove all batteries.

Fehlerbehebung

• Keine Lektüre im Freien: Ensure the remote sensor batteries are correctly installed and the sensor is within range of the main unit. Try re-pairing by removing and reinserting batteries in both units.
• Ungenaue Messwerte: Verify the remote sensor is placed in a shaded, well-ventilated area, away from heat sources or direct sunlight. Allow time for the sensors to stabilize after initial setup or battery replacement.
• Anzeigeprobleme: Check battery levels or ensure the USB power cable is securely connected.

Technische Daten

Garantie und Support

This product comes with a one-year warranty (batteries not included). For any questions or support needs, please contact U UNNI customer service.

E-Mail: unni_technology@hotmail.com