Nuwave Diamond Induktionskochfeld Modell 30511 Bedienungsanleitung

1. Wichtige Sicherheitshinweise

Please read this entire instruction manual carefully before operating your Nuwave Diamond Induction Cooktop. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always place the cooktop on a stable, level, heat-resistant surface.
• Do not immerse the cooktop unit, cord, or plug in water or other liquids.
• Sorgen Sie während des Betriebs für ausreichende Belüftung rund um das Gerät.
• The cooking surface can remain hot even after cooking. Exercise caution.
• Außerhalb der Reichweite von Kindern und Haustieren aufbewahren.
• Use only induction-ready cookware. Non-compatible cookware will not heat.
• Do not operate the cooktop if the cord or plug is damaged, or if the unit malfunctions or has been damaged in any way. Contact customer support for assistance.

2. Produktkomponenten

Your Nuwave Diamond Induction Cooktop comes with the following components:

• Nuwave Diamond Induction Cooktop Unit
• Digital Smart Thermometer Probe
• Sondenhalter
• Benutzerhandbuch & Schnellstartanleitung

Figure 2.1: Nuwave Diamond Induction Cooktop with included probe.

3. Kompatibilität des Kochgeschirrs

The Nuwave Diamond Induction Cooktop uses electromagnetic fields to generate heat directly in the cookware. This means only cookware made of ferrous (magnetic) materials will work.

3.1 How to Test Your Cookware

To determine if your existing cookware is induction-ready, simply place a magnet on the bottom of the pot or pan. If the magnet sticks firmly, the cookware is compatible. If the magnet does not stick, or sticks weakly, the cookware is not suitable for induction cooking.

Figure 3.1: A magnet test demonstrates cookware compatibility for induction cooktops.

Minimum Cookware Diameter: 3 Zoll (7.6 cm)
Maximum Cookware Diameter: 12 Zoll (30.5 cm)

4. Einrichtung und erste Verwendung

1. Auspacken: Nehmen Sie alle Komponenten vorsichtig aus der Verpackung. Bewahren Sie die Verpackung für die spätere Lagerung oder den Transport auf.
2. Remove Stickers: Peel off any protective films or stickers from the cooktop surface and control panel.
3. Platzierung: Place the cooktop on a dry, stable, and level surface. Ensure there is adequate space around the unit for proper ventilation.
4. Stromanschluss: Stecken Sie das Netzkabel in eine normale 120-V-Wechselstromsteckdose.

5. Bedienungsanleitung

5.1 Ein-/Ausschalten

• Drücken Sie die EIN/AUS button to turn the unit on. The display will show the default cooking temperature (500°F) and time.
• Drücken Sie die EIN/AUS Drücken Sie die Taste erneut, um das Gerät auszuschalten.

5.2 Setting Cooking Temperature

The Nuwave Diamond offers 91 precise temperature settings from 50°F to 500°F, adjustable in 5°F increments.

• Preset-Tasten: Verwenden Sie die Niedrig (100°F), Med (200°F), mittelhoch (300°F), Hoch (400°F), or Anbraten (500°F) buttons for quick temperature selection.
• Adjusting Manually: Verwenden Sie die + or - buttons to increase or decrease the temperature in 5°F increments.
• Fahrenheit/Celsius-Umrechnung: Halten Sie die mittelhoch button for 3 seconds to switch between Fahrenheit and Celsius. Repeat to switch back.

Figure 5.1: Control panel with temperature presets and adjustment buttons.

5.3 Using the Digital Smart Thermometer Probe

The included probe allows for precise internal temperature monitoring of your food.

1. Insert the probe into the designated jack on the side of the cooktop.
2. Place the probe holder on the edge of your cookware and insert the probe into the food, ensuring the tip is in the thickest part and not touching bone or the bottom of the pan.
3. Drücken Sie die Sonde button to display the current internal temperature of the food.
4. To set a target temperature, press and hold the Sonde Drücken Sie die Taste, bis die Anzeige blinkt. + or - to set your desired target temperature. The cooktop will automatically adjust to maintain this temperature.

Figure 5.2: The digital probe ensures precise temperature control for optimal cooking results.

5.4 Setting Cooking Time

You can set a cooking time for up to 99 hours and 59 minutes.

1. Drücken Sie die Zeit button. The display will show the default time (e.g., 01:00 for 1 hour).
2. Verwenden Sie die + or - buttons to adjust the desired cooking time.
3. Das Kochfeld schaltet sich nach Ablauf der eingestellten Zeit automatisch ab.

5.5 Wattage Kontrolle

The Nuwave Diamond offers three wattage settings to accommodate various power requirements and cooking needs:

• 600 Watt: Ideal for low-power environments such as campers, RVs, boats, and dorms.
• 900 Watt: Suitable for smaller kitchens or apartments.
• 1400 Watt: Provides maximum power for faster and more efficient cooking.

Um das Wasser zu änderntage setting, press and hold the Time/Watts button until the desired wattagDie Anzeige leuchtet.

5.6 Programmed Recipes

The cooktop includes 4 pre-programmed recipes and allows you to save up to 46 of your own custom recipes.

• Vorprogrammiert: Boiling Pasta, Soup/Stock, Deep Frying, and Rice Cooking.
• To access, press the Vorgabe drücken und verwenden + or - to select the recipe number.
• Refer to the Quick Start Guide for detailed instructions on saving custom recipes.

Figure 5.3: Four automatic cooking functions for convenience.

5.7 Stage Kochen

Der Stage Cooking feature allows you to program up to three different cooking stages with varying temperatures and times.

1. Drücken Sie die Stage button. The display will show "Stg 1".
2. Set the desired temperature and time for Stage 1 using the temperature and time adjustment buttons.
3. Drücken Stage again to move to Stage 2, and repeat the process. Do the same for Stage 3.
4. Drücken Start/Pause to begin the programmed cooking stages.

5.8 Keypad Lock Feature

To prevent accidental changes to settings during cooking, you can lock the control panel.

• Zum Sperren: Die Taste gedrückt halten Stage Und Med buttons simultaneously until "LOC" appears on the display.
• To unlock: Repeat the process (press and hold Stage Und Med simultaneously) or turn the unit off and on.

5.9 Mute/Unmute Beep Sound

You can mute the cooktop's beep sounds if desired.

• To mute: Press and hold the Niedrig button for 3 seconds until the beep sounds are turned off.
• To unmute: Press and hold the Niedrig button again for 3 seconds until it beeps.

6. Pflege und Wartung

Proper care and maintenance will ensure the longevity and optimal performance of your Nuwave Diamond Induction Cooktop.

• Reinigung der Oberfläche: Lassen Sie das Kochfeld nach jedem Gebrauch vollständig abkühlen. Wischen Sie die Glaskeramikoberfläche mit einem feuchten Tuch ab.amp cloth and mild detergent if necessary. Do not use abrasive cleaners or scouring pads.
• Reinigung der Basis: Wischen Sie die Unterseite des Geräts mit ad abamp Das Gerät darf nicht in Wasser oder andere Flüssigkeiten getaucht werden.
• Lagerung: Store the cooktop in a cool, dry place when not in use. Its compact size allows for easy storage in most drawers or cabinets.

Figure 6.1: The smooth ceramic glass surface is easy to clean.

7. Anleitung zur Fehlerbehebung

If you encounter issues with your Nuwave Diamond Induction Cooktop, refer to the following common problems and solutions:

8. Technische Daten

9. Garantie und Support

Your Nuwave Diamond Induction Cooktop is backed by a standard 5-year manufacturer's warranty. To activate your warranty and receive support, please refer to the information provided with your product or visit the official Nuwave webWebsite.

• Garantie-Abdeckung: Deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab.
• Aktivierung: Register your product online to activate the full 5-year warranty.
• Unterstützung: For technical assistance, troubleshooting, or warranty claims, please contact Nuwave customer service.

Figure 9.1: The Nuwave Diamond Induction Cooktop comes with a 5-year warranty.