1. Sicherheitshinweise
Bitte lesen Sie vor der Verwendung dieses Produkts alle Sicherheitshinweise und Anweisungen sorgfältig durch. Die Nichtbeachtung der Hinweise und Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.
- Gefahr durch hohe Temperaturen: The soldering iron tip reaches very high temperatures (up to 450°C). Avoid direct contact with the tip to prevent burns. Allow the iron to cool completely before handling or storing.
- Einatmen von Dämpfen: Beim Löten entstehen Dämpfe. Arbeiten Sie stets in einem gut belüfteten Bereich oder verwenden Sie eine Absaugvorrichtung, um das Einatmen schädlicher Dämpfe zu vermeiden.
- Elektrische Sicherheit: Ensure the power supply used is compatible with the soldering iron's voltage und wattage requirements (9-20V DC, 18-100W). Use only certified PD/QC power adapters. Do not use the soldering iron if the cable or plug is damaged.
- Induced Electricity: It is normal for fast charging heads to have induced electricity. If you are sensitive to induced electricity, it is recommended to use the soldering iron with a power bank.
- Bestimmungsgemäße Verwendung: Use the soldering iron only for its intended purpose of soldering electronic components. Do not use it near flammable materials or liquids.
- Kinder und Haustiere: Keep the soldering iron out of reach of children and pets at all times.
2. Packungsinhalt
Verify that all items listed below are present in your package. If any items are missing or damaged, please contact ALIENTEK customer support.
Image: Standard package contents for the ALIENTEK T80 Smart Soldering Iron kit.
- ALIENTEK T80 Smart Soldering Iron Host
- Soldering Iron Tip (T80-xx series)
- USB-Typ-C-auf-Typ-C-Kabel
- Lötkolbenständer
- Benutzerhandbuch (dieses Dokument)
3. Produktüberschreitungview
The ALIENTEK T80 Smart Soldering Iron is a portable, high-performance digital soldering tool designed for precision work. It features fast heating, an OLED display, and intelligent auto-sleep functionality.
Bild: Überview of the ALIENTEK T80/T80P Smart Soldering Iron, emphasizing its key features.
3.1 Grundlegende Parameter
Image: Detailed basic parameters and specifications of the T80/T80P Smart Soldering Iron.
| Parameter | Beschreibung |
|---|---|
| Produktname | T80 / T80P Smart Soldering Iron |
| Stromversorgung | Typ C |
| Betriebslautstärketage | Gleichstrom 9 bis 20 V |
| Schnellladeprotokoll | PD2.0/3.0, QC2.0/3.0 |
| Temperaturbereich | 80~450°C |
| Power (Adjustable) | 18 bis 100 W |
| Bildschirm | 0.87' OLED (128*32 Pixel) |
3.2 Hauptmerkmale
- Type-C interface power supply, supports PD/QC fast charge protocol.
- OLED display for clear working status.
- Supports 9~20V working voltage Reichweite.
- Supports 18~100W heating power adjustable.
- Fast heating: 2 seconds to melt tin (T80 @ 100W).
- Fast return temperature, suitable for large solder joints.
- Temperature control precision and stability: ±2%.
- Intelligent induction for energy saving (auto-sleep).
- Small size, portable, ergonomic design.
3.3 Induced Dormancy (Auto Sleep)
The soldering iron features an intelligent induction design that automatically puts the device into hibernation mode when it is put down. This prolongs the life of the heating core and saves energy. Picking up the host will automatically wake it up.
Image: Illustration of the induced dormancy feature, showing the soldering iron entering sleep mode when put down.
3.4 T80 vs T80P Comparison
The T80 and T80P models share many features but differ in heating core type, size, resistance, weight, and tinning time.
Image: Comparison of T80 and T80P models, including tip insertion diagrams.
| Besonderheit | T80 | T80P |
|---|---|---|
| Heizkerntyp | T80-xx | T80P-xx |
| Heating Core Size | L80mm Ø3.5mm | L98mm Ø4.5mm |
| Widerstandswert | 2.1 Ω | 2.5 Ω |
| Maschinengewicht | 38.5g | 42.8g |
| Konservierungszeit | 2S (@100W) | 5S (@100W) |
4. Einrichtung
Follow these steps to set up your ALIENTEK T80 Smart Soldering Iron for first use.
- Lötspitze einsetzen: Carefully insert the desired soldering tip into the front end of the soldering iron handle. Ensure it is fully seated and secure.
- Stromversorgung anschließen: Connect a compatible USB Type-C power supply (PD/QC protocol, 9-20V DC, 18-100W) to the Type-C port on the soldering iron. A 100W+ charger is recommended for optimal performance.
- Auf den Ständer stellen: Always place the soldering iron on its included stand when not actively in use to prevent accidental burns or damage to surfaces.
5. Bedienung
5.1 Ein-/Ausschalten
The soldering iron powers on automatically when connected to a compatible power supply. To power off, simply disconnect the power supply. The device will enter auto-sleep mode when idle.
5.2 Temperature Adjustment and Power Fine-Tuning
The T80/T80P supports adjustable heating power from 18W to 100W, with 6 predefined power gears. The current can be fine-tuned for precise power adjustment.
Image: Power adjustment gears and instructions for fine-tuning power settings.
To Fine-Tune Power:
- Press button A or B to select the adjustment item on the OLED screen.
- Long press button B to select, short press to adjust the value.
- Long press button A to exit the adjustment interface.
- Select 'OK' and press and hold button B to save your settings.
Note: The T80 may experience a temporary temperature jump when using a new heating core. The temperature will stabilize after several uses.
5.3-Zoll-OLED-Bildschirm
The OLED screen provides real-time information about the soldering iron's status and allows access to various settings.
Bild: Examples of information displayed on the OLED screen, including temperature, settings, and status.
The screen can display:
- Current Set Temperature and Actual Temperature
- Power Level (e.g., 100%)
- Bandtage Information (Vol Info)
- Temperature Step (Temp Step) for fine adjustments
- Sleep Mode Indicator (Sleep)
- Standby Temperature (Stdb)
- Upgrade-Modus
- Language Selection (e.g., English)
6. Wartung
Proper maintenance ensures the longevity and optimal performance of your soldering iron.
- Reinigung der Spitzen: Reinigen Sie die Lötspitze regelmäßig mit einem Reinigungsmittel.amp sponge or brass wool to remove excess solder and oxidation. This helps maintain good heat transfer and extends tip life.
- Tipp zum Verzinnen: After cleaning and before storing, always tin the tip with a small amount of fresh solder. This prevents oxidation and corrosion.
- Abkühlen: Always allow the soldering iron to cool down completely before storing it.
- Lagerung: Store the soldering iron in a dry, safe place, away from dust and moisture.
- Körperreinigung: Reinigen Sie das Gehäuse des Lötkolbens mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
7. Fehlerbehebung
If you encounter issues with your ALIENTEK T80 Smart Soldering Iron, refer to the following common problems and solutions.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Soldering iron does not heat up. | Incompatible or insufficient power supply; loose tip connection; faulty heating element. | Ensure power supply meets 9-20V DC and 18-100W (PD/QC). Check Type-C cable connection. Re-insert tip firmly. If problem persists, contact support. |
| Temperature is unstable or fluctuates. | Insufficient power supply; new heating core (initial use); poor tip contact. | Verwenden Sie eine höhere Watttage power supply (e.g., 100W). Allow for several uses for new tips to stabilize. Ensure tip is fully seated. |
| OLED screen is blank or not displaying correctly. | No power; device in sleep mode; internal error. | Check power connection. Pick up the iron to wake from sleep. Disconnect and reconnect power. If issue persists, contact support. |
| Soldering tip does not melt solder effectively. | Tip is oxidized or dirty; incorrect temperature setting; worn out tip. | Clean and re-tin the tip. Increase temperature setting. Replace the soldering tip if worn. |
8. Spezifikationen
Detailed technical specifications for the ALIENTEK T80 Smart Soldering Iron.
| Spezifikation | Wert |
|---|---|
| Marke | ALIENTEK |
| Modellnummer | T80 |
| Stromquelle | PD/DC (Typ-C) |
| Wastage | 18 - 100 watts (adjustable) |
| Betriebslautstärketage | 9 - 20 Volts (DC) |
| Temperaturbereich | 80 - 450 Grad Celsius |
| Besonderheit | Portable, Digital OLED Screen, Auto Sleep |
| Griffmaterial | Aluminium |
| Artikelgewicht | 9.6 Unzen (ca. 272 g) |
| UPC | 717225381134 |
9. Garantie und Support
ALIENTEK products are manufactured to high-quality standards. For warranty information or technical support, please contact ALIENTEK customer service through the official ALIENTEK store on Amazon or their official website. Please have your product model number (T80) and purchase details ready when contacting support.
Für aktuelle Informationen und Unterstützungsangebote besuchen Sie bitte die ALIENTEK Store on Amazon.