1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. Packungsinhalt
Bitte überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- Wärmeleitpad
- Benutzerhandbuch (dieses Dokument)
3. Spezifikationen
| Besonderheit | Beschreibung |
|---|---|
| Modell | M.2 SATA/NVME Enclosure |
| Schnittstelle | USB 3.2 Gen 2 Typ-C |
| Datenübertragungsrate | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| Unterstützte SSD-Typen | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| Unterstützte SSD-Größen | 2230, 2242, 2260, 2280 |
| Maximale Kapazität | 4 TB |
| Chipsatz | RTL9210B (Supports UASP, Trim) |
| Material | Aluminiumlegierung |
| Maße | Ungefähr 4.92 x 2.83 x 0.67 Zoll |
| Gewicht | Ungefähr 60 Gramm (2.12 Unzen) |
| Betriebssystemkompatibilität | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| Gerätekompatibilität | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. Installationsanleitung
4.1-SSD-Installation
Führen Sie diese Schritte aus, um Ihre M.2 SSD in das Gehäuse einzubauen:
- Öffnen Sie das Gehäuse: Push the switch on the side of the enclosure and slide out the inner frame.
- SSD einlegen: Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- Sichere SSD: Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- Wärmeleitpad anbringen: Place the thermal pad onto the SSD chips to aid in heat dissipation.
- Geschlossene Umzäunung: Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.
4.2 Mit einem Gerät verbinden
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.
Notiz: For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. Bedienungsanleitung
5.1 Datenübertragung
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop fileoder verwenden Sie die Ihres Systems. file Management-Tools zur Datenübertragung.
- NVMe-SSD: Supports transfer rates up to 10Gbps.
- SATA-SSD: Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.
5.2 SSD-Kompatibilität
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- Größen: 2230, 2242, 2260, and 2280 form factors.
6. Wartung
6.1 Wärmeableitung
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.
6.2 Reinigung
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7. Fehlerbehebung
- Enclosure not detected:
- Stellen Sie sicher, dass die SSD korrekt im Gehäuse installiert und befestigt ist.
- Try connecting the enclosure to a different USB port on your device.
- Testen Sie es gegebenenfalls mit einem anderen USB-Kabel.
- Verify that the SSD itself is functional by testing it in another compatible device if possible.
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- Langsame Übertragungsgeschwindigkeiten:
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- Schließen Sie andere Anwendungen, die möglicherweise Systemressourcen oder Festplattenzugriffe beanspruchen.
- Check the health of your SSD.
- Das Gehäuse wird heiß:
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8. Offizielle Produktvideos
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. Garantieinformationen
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. Unterstützung
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official webauf der Website oder auf der Produktverpackung.