Benutzerhandbuch für das tragbare Ladegerät Signia Silk Charge & Go IX
Marke: Signia | Modell: Signia Charge and Go
1. Einleitung
This manual provides comprehensive instructions for the Signia Silk Charge & Go IX portable charger. This device is designed to offer convenient and wireless charging for compatible Signia Silk IX 5 and 7 hearing aids, ensuring they remain powered throughout the day and providing additional charges when away from a power outlet.
2. Sicherheitshinweise
Please read all safety information carefully before using the Signia Silk Charge & Go IX portable charger. Failure to follow these instructions may result in injury or damage to the device.
Nicht expose the charger to extreme temperatures, direct sunlight, or high humidity.
Nicht immerse the charger in water or any other liquids.
Nicht attempt to open, modify, or repair the charger yourself. Refer all servicing to qualified personnel.
Bewahren Sie das Ladegerät außerhalb der Reichweite von Kindern und Haustieren auf.
Use only the charging cable and power adapter recommended by Signia.
If the charger shows signs of damage, discontinue use immediately.
3. Produktüberschreitungview
The Signia Silk Charge & Go IX portable charger is a compact and efficient charging solution. Familiarize yourself with its components:
3.1 Ladegerätkomponenten
Bild 1: The Signia Silk Charge & Go IX portable charger with its lid open, revealing the two empty charging slots designed for hearing aids. This view highlights the compact and ergonomic design of the charging case.
Ladesteckplätze: Two dedicated slots for left (blue) and right (red) hearing aids.
LED-Anzeigen: Small lights on the front of the charger that indicate charging status and battery level.
USB-C-Ladeanschluss: Located on the back or side for connecting the charger to a power source.
Deckel: Protects the hearing aids and ensures proper contact during charging.
3.2 Geschlossen View
Bild 2: The Signia Silk Charge & Go IX portable charger in its closed state. This image emphasizes the device's portability and discreet appearance, suitable for carrying in a pocket or bag.
When closed, the charger is designed to be compact and easily portable, allowing you to carry it with your hearing aids safely stored inside.
4. Einrichtung
4.1 Auspacken und Erstaufladung
Nehmen Sie das Ladegerät und sämtliches Zubehör vorsichtig aus der Verpackung.
Connect the provided USB-C cable to the charging port on the charger and the other end to a compatible USB power adapter (not included) or a computer USB port.
Allow the charger to fully charge before first use. The LED indicator will show the charging status (e.g., blinking while charging, solid when fully charged). A full charge typically takes a few hours.
4.2 Inserting Hearing Aids
Bild 3: The Signia Silk Charge & Go IX portable charger with two Signia Silk IX hearing aids correctly placed in their respective charging slots. Green indicator lights are visible, signifying that the hearing aids are actively charging.
Open the lid of the portable charger.
Identify the left (blue) and right (red) indicators inside the charging slots.
Gently place your Signia Silk IX hearing aids into their corresponding slots. Ensure they are seated correctly and make proper contact with the charging pins.
Close the lid. The hearing aids will automatically begin charging.
5. Betrieb des Ladegeräts
5.1 Charging Hearing Aids
Once hearing aids are correctly placed in the charger and the lid is closed, charging will commence. The LED indicators on the charger will provide feedback:
Grün blinkend: Hearing aids are charging.
Durchgängig grün: Hearing aids are fully charged.
Blinkendes Orange/Rot: Low battery on the portable charger itself.
A full charge for the hearing aids typically takes approximately 4 hours. The portable charger can provide up to 4 days of additional charges for your hearing aids on a single full charge of the charger itself.
5.2 Portable Charging
The Signia Silk Charge & Go IX is designed for portability. Once the charger itself is fully charged, you can disconnect it from the power source and use it to charge your hearing aids on the go. Simply place your hearing aids in the charger, close the lid, and they will charge wirelessly using the internal battery of the portable charger.
6. Wartung
6.1 Reinigung des Ladegeräts
Ensure the charger is disconnected from any power source before cleaning.
Wipe the exterior of the charger with a soft, dry, lint-free cloth.
Verwenden Sie keine Scheuermittel, Lösungsmittel oder aggressive Chemikalien.
Gently clean the charging contacts inside the slots with a dry cotton swab if necessary, ensuring no debris is present.
6.2 Speicherung
When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the charger has at least a partial charge to maintain battery health.
7. Fehlerbehebung
If you encounter issues with your Signia Silk Charge & Go IX portable charger, refer to the following common problems and solutions:
Ladegerät schaltet sich nicht ein oder lädt nicht:
Stellen Sie sicher, dass das USB-C-Kabel sowohl mit dem Ladegerät als auch mit der Stromquelle fest verbunden ist.
Versuchen Sie es mit einem anderen USB-Anschluss oder Netzteil.
Überprüfen Sie, ob die Steckdose funktionsfähig ist.
Hearing aids not charging when placed in the charger:
Ensure the hearing aids are correctly seated in their respective left/right slots and making proper contact with the charging pins.
Verify that the portable charger itself has sufficient battery charge (check its LED indicator).
Clean the charging contacts on both the hearing aids and the charger.
Stellen Sie sicher, dass der Deckel vollständig geschlossen ist.
LED-Anzeigen funktionieren nicht:
If the charger is connected to power, ensure the power source is active.
If the charger is running on its internal battery, ensure it has charge.
Wenn das Problem weiterhin besteht, wenden Sie sich an den Kundendienst.
If these steps do not resolve the issue, please contact Signia customer support or your hearing care professional.
8. Spezifikationen
Besonderheit
Spezifikation
Technische Daten
1 x 3.5 x 1 Zoll
Artikelmodellnummer
Signia Charge and Go
Konnektivitätstechnologie
USB
Steckertyp
USB Typ C
Kompatible Geräte
Signia Silk IX 5 & 7 Hearing Aids
Besonderheit
Tragbares Ladegerät
Farbe
Weiß
Anzahl USB-Anschlüsse
1
Wastage
10 Watt
Anzahl der Artikel
1
Material
Plastik
Hersteller
WSAUD A/S
ASIN
B0CRLCHFFR
9. Garantie und Support
9.1 Garantieinformationen
The Signia Silk Charge & Go IX portable charger comes with a 1 Jahr Garantie provided through the manufacturer. Please retain your proof of purchase for warranty claims.
9.2 Kundendienst
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Signia customer support or your authorized Signia hearing care professional. Contact information can typically be found on the manufacturer's official weboder über Ihre Verkaufsstelle.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
