NuPhy Air60 V2 QMK/VIA Mechanical Keyboard User Manual

Produkt überview

The NuPhy Air60 V2 is a 60% low-profile mechanical keyboard designed for versatility and performance. It features QMK/VIA compatibility for extensive customization, multiple connectivity options (Bluetooth 5.1, 2.4GHz wireless, and wired USB-C), and is compatible with both Windows and macOS operating systems. The keyboard is equipped with hot-swappable switches and durable double-shot PBT keycaps, providing a responsive and customizable typing experience.

Ersteinrichtung

Packungsinhalt

• NuPhy Air60 V2 Keyboard
• USB-C-auf-USB-A-Kabel
• 2.4-GHz-Empfänger
• Tastenkappenabzieher
• Abzieher wechseln
• Additional Keycaps (optional)
• NuFolio V3 (optional)

Aufladen der Tastatur

Before first use, fully charge the keyboard. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a compatible wall adapter. The charging indicator light will show the charging status and turn off when fully charged.

Konnektivitätsmodi

The Air60 V2 supports three connection modes: Bluetooth 5.1, 2.4GHz wireless, and wired USB-C. Use the mode switch located on the side of the keyboard to select your desired connection type.

2.4GHz-Funkverbindung

1. Stecken Sie den 2.4-GHz-Empfänger in einen freien USB-Anschluss Ihres Computers.
2. Switch the keyboard to 2.4GHz mode using the physical switch. The keyboard will automatically connect to the receiver.

Bluetooth 5.1-Verbindung

1. Switch the keyboard to Bluetooth mode using the physical switch.
2. On your device (computer, tablet, or smartphone), navigate to Bluetooth settings and search for new devices.
3. Select "NuPhy Air60 V2" from the list of available devices to pair. The keyboard supports pairing with up to three Bluetooth devices, switchable via specific key combinations (refer to the operating section for details).

Kabelgebundene USB-C-Verbindung

Connect the keyboard directly to your computer using the provided USB-C cable. The keyboard will automatically operate in wired mode and charge simultaneously. This mode is recommended for firmware updates.

Betrieb

Systemkompatibilitätsschalter

The keyboard features a dedicated switch to toggle between Windows and macOS layouts. Ensure this switch is set to the correct operating system for proper key mapping and functionality.

QMK/VIA Customization

The Air60 V2 is compatible with QMK/VIA firmware, offering extensive customization options. Download the VIA software from the official NuPhy webWebsite zu:

• Belegen Sie einzelne Tasten mit verschiedenen Funktionen.
• Komplexe Makros erstellen und zuweisen.
• RGB-Beleuchtungseffekte und Farben individuell anpassen.
• Manage multiple key layers for advanced functionality.

RGB-Lichteffekte

The keyboard features customizable RGB backlighting. Various lighting effects, colors, and brightness levels can be configured through the VIA software or by using onboard shortcut key combinations. Refer to the quick start guide or the NuPhy website for specific key commands to cycle through effects and adjust settings.

Wartung

Reinigung

To maintain optimal performance and appearance, regularly clean your keyboard. Use a soft brush or compressed air to remove dust and debris from between the keycaps. For surface cleaning, gently wipe the keyboard with a slightly dampVerwenden Sie ein fusselfreies Tuch. Vermeiden Sie die Verwendung von scharfen Chemikalien oder scheuernden Materialien.

Tastenkappen-Austausch

The Air60 V2 features durable double-shot PBT keycaps. To replace keycaps, use the provided keycap puller. Gently attach the puller to the keycap and pull straight up. When installing new keycaps, align them properly with the switch stem and press down firmly until they click into place. Avoid twisting or applying excessive force.

Austausch des Schalters

This keyboard is hot-swappable, allowing you to change mechanical switches without soldering. To replace a switch:

1. First, remove the keycap using the keycap puller.
2. Use the provided switch puller to grasp the top and bottom clips of the switch.
3. Den Schalter vorsichtig gerade nach oben ziehen, um ihn von der Platine zu entfernen.
4. To install a new switch, ensure its pins are straight and align them with the holes on the PCB. Press down firmly until the switch clicks into place. Ensure the switch is fully seated and functional before replacing the keycap.

Fehlerbehebung

Verbindungsprobleme

• Keine Verbindung: Ensure the keyboard is charged and the mode switch is set correctly (Bluetooth, 2.4GHz, or Wired). For wireless modes, ensure the keyboard is within range of your device or the 2.4GHz receiver.
• 2.4GHz Disconnection: Try re-inserting the 2.4GHz receiver into a different USB port. Ensure there are no strong interferences from other wireless devices.
• Bluetooth-Kopplungsfehler: Delete the keyboard from your device's Bluetooth list and attempt to re-pair. Ensure the keyboard is in pairing mode.

Tasten reagieren nicht

• Individual Keys: If specific keys are not working, the switch might be faulty or improperly seated. As the keyboard is hot-swappable, try removing and re-inserting the switch, or replace it with a spare switch.
• Alle Schlüssel: Check the system compatibility switch (Windows/macOS) to ensure it matches your operating system. Try connecting the keyboard via USB-C cable to rule out wireless issues.

Beleuchtungsprobleme

• Keine Hintergrundbeleuchtung: Ensure the keyboard battery is sufficiently charged. Check if the backlight has been turned off via onboard shortcuts or VIA software.
• Incorrect Effects/Colors: Use the VIA software to reset or reconfigure your desired RGB lighting effects.

Firmware-Aktualisierungen

Periodically check the official NuPhy website for firmware updates. Updating the firmware can resolve bugs, improve performance, and introduce new features. Always follow the instructions provided with the firmware update tool carefully to avoid damaging the device. Firmware updates are typically performed via a wired USB-C connection.

Produktspezifikationen

Garantie und Support

Garantieinformationen

The NuPhy Air60 V2 keyboard comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for detailed terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.

Kundenservice

For technical assistance, troubleshooting, or any product-related inquiries, please visit the official NuPhy support page or contact their customer service team. When contacting support, please have your product serial number and purchase details readily available for efficient service.

Official NuPhy WebWebsite: www.nuphy.com