MIUCDA TRV10-WIFI

MIUCDA Smart WiFi Radiator Thermostat

Model: TRV10-WIFI User Manual

Einführung

Thank you for choosing the MIUCDA Smart WiFi Radiator Thermostat (TRV10-WIFI). This intelligent device allows you to control your radiator heating system efficiently, offering convenience through app control, voice commands, and programmable schedules. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and energy savings.

MIUCDA Smart WiFi Radiator Thermostat TRV10-WIFI on a radiator with a smartphone showing the control app, indicating no Zigbee hub is required.

The MIUCDA Smart WiFi Radiator Thermostat TRV10-WIFI connects directly to your 2.4G WiFi router, eliminating the need for a separate Zigbee hub.

Sicherheitshinweise

  • Lesen Sie alle Anweisungen vor der Installation und Verwendung sorgfältig durch.
  • Batteriesicherheit: Use only 3x AA 1.5V alkaline batteries. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries according to local regulations.
  • Ensure the device is installed correctly to prevent damage or malfunction.
  • Keep the device out of reach of children to prevent accidental operation or ingestion of small parts.
  • Setzen Sie das Gerät keinen extremen Temperaturen, direkter Sonneneinstrahlung oder Feuchtigkeit aus.

Packungsinhalt

  • MIUCDA Smart WiFi Radiator Thermostat (TRV10-WIFI)
  • Various Radiator Adapters (e.g., for Danfoss RA, RAV, RAV L, Caleffi, Giacomini, M28 valves)
  • Bedienungsanleitung

Notiz: 3 AA 1.5V alkaline batteries are required for operation and may not be included in the package. Please check your product packaging.

Setup und Installation

1. Einlegen der Batterie

  1. Remove the battery compartment cover from the thermostat.
  2. Legen Sie 3 AA 1.5V Alkaline-Batterien ein und achten Sie dabei auf die richtige Polarität (+/-).
  3. Bringen Sie die Abdeckung des Batteriefachs wieder an.
Step-by-step guide showing battery installation, mounting the thermostat to a radiator valve, and pairing with the app.

Step 1: Press the battery compartment lock, remove the cover, and insert the batteries.

2. Mounting to Radiator

The thermostat comes with various adapters to fit different radiator valves. Identify the correct adapter for your valve type.

  • If your radiator valve is a standard M30x1.5, you may not need an adapter.
  • For other valve types (e.g., Danfoss RA, RAV, RAV L, Caleffi, Giacomini), select the appropriate adapter.
  • Befestigen Sie den gewählten Adapter an Ihrem Heizkörperventil.
  • Screw the thermostat onto the adapter or directly onto the valve until it is securely fastened.
Diagram showing different radiator valve adapters for Danfoss RA, RAV, RAV L, Caleffi, Giacomini, and M28 valves.

Various adapters are provided for compatibility with different radiator valve types.

3. App-Installation und -Kopplung

  1. Laden Sie die Tuya Smart or Intelligentes Leben app from your mobile device's app store (App Store for iOS, Google Play for Android).
  2. Registrieren Sie sich oder melden Sie sich in Ihrem Konto an.
  3. On the thermostat, press and hold the central button for 3 seconds until the WiFi icon blinks rapidly, indicating pairing mode.
  4. Open the app, tap the '+' icon in the top right corner, and select 'Add Device' or 'Auto Scan'.
  5. Follow the on-screen instructions to connect the thermostat to your 2.4GHz WiFi network. Ensure your phone is also connected to the same 2.4GHz network.
  6. Once connected, you can rename the device and begin controlling it via the app.
Smartphone screen showing the Smart Life app interface for controlling the radiator thermostat, with Tuya App and Smart Life logos.

Control your thermostat anytime, anywhere using the Tuya Smart or Smart Life mobile application.

Bedienungsanleitung

1. Manuelle Steuerung

You can manually adjust the temperature directly on the thermostat by rotating the knob. The current temperature will be displayed on the screen.

2. App-Steuerung

Use the Tuya Smart or Smart Life app to remotely control your thermostat. You can:

  • Passen Sie die Zieltemperatur an.
  • Set heating schedules.
  • Activate/deactivate features like open window detection or child lock.
  • Monitor temperature history and energy usage.

3. Sprachsteuerung (Alexa / Google Home)

The thermostat is compatible with Amazon Alexa and Google Home. After linking your Tuya Smart/Smart Life account in the Alexa or Google Home app, you can control the thermostat with simple voice commands.

  • Example: "Alexa, set the bedroom temperature to 21 degrees."
  • Example: "Hey Google, what is the temperature in the living room?"
A person interacting with an Alexa device to control the radiator thermostat, with Google Home devices also shown.

Control your radiator thermostat using voice commands with Amazon Alexa or Google Home.

4. Programmplan

Set up a 7-day programmable weekly schedule with up to 4 time periods per day via the app to optimize heating and save energy.

Smartphone screen displaying a heating schedule for a programmable radiator thermostat, showing different temperatures for various times of day.

Create custom heating schedules for each day of the week to match your lifestyle and save energy.

5. Offene Fenstererkennung

This feature automatically detects a sudden drop in temperature (more than 1.5°C within 5 minutes), indicating an open window. The thermostat will temporarily turn off heating for 30 minutes to prevent energy waste. Heating resumes if no operation is performed for 30 minutes or if the temperature rises by more than 1.5°C within 4.5 minutes. This function must be enabled in the app.

A radiator thermostat detecting an open window, with leaves blowing in from outside, illustrating the open window detection feature.

The open window detection feature helps save energy by temporarily pausing heating when a window is open.

6. Temperaturkalibrierung

If you notice a discrepancy between the actual room temperature and the temperature displayed on the TRV, you can calibrate the internal sensor using the app. The adjustment range is typically -10°C to +10°C.

Smartphone screen showing temperature calibration settings for the thermostat, allowing adjustment of the room sensor.

Calibrate the thermostat's temperature sensor via the app for precise temperature management.

7. Bildschirmausrichtung

The digital display can be rotated to two orientations for easier reading, depending on how the thermostat is mounted. Press the setup button to switch the display orientation.

Images showing the thermostat display in two different orientations (up and down) and an illustration of pressing a button to rotate the screen.

Adjust the display orientation for optimal readability based on the thermostat's mounting position.

8. Backlight Brightness

The thermostat features three levels of adjustable backlight brightness (Low, Medium, High) to suit your preference and create a comfortable environment, especially during sleep.

Images showing the thermostat display at low, medium, and high brightness settings, along with a smartphone app interface for adjusting brightness.

Customize the backlight brightness for comfortable viewbei allen Lichtverhältnissen.

Wartung

1. Batteriewechsel

When the battery indicator appears on the display or in the app, replace the batteries promptly. Use 3 new AA 1.5V alkaline batteries. Follow the battery installation steps outlined in the Setup section.

2. Reinigung

Wipe the thermostat with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

Fehlerbehebung

Problem Mögliche Ursache Lösung
Thermostat not connecting to Wi-Fi / Frequent disconnections Weak Wi-Fi signal, incorrect Wi-Fi password, 5GHz Wi-Fi network, router issues.
  • Stellen Sie sicher, dass Ihr Router ein 2.4-GHz-WLAN-Netzwerk ausstrahlt.
  • Move the thermostat closer to the Wi-Fi router.
  • Überprüfen Sie, ob das in der App eingegebene WLAN-Passwort korrekt ist.
  • Starten Sie Ihren WLAN-Router neu.
  • Koppeln Sie das Gerät erneut mit der App.
Hoher Batterieverbrauch Poor Wi-Fi signal (device constantly searching), frequent temperature changes, low-quality batteries.
  • Verwenden Sie hochwertige Alkalibatterien.
  • Ensure a strong Wi-Fi signal to the device.
  • Avoid excessively frequent manual temperature adjustments.
Ungenaue Temperaturanzeige Thermostat placed in a drafty area, direct sunlight, or near another heat source; sensor calibration needed.
  • Relocate the thermostat if possible, or ensure it's not affected by external factors.
  • Perform temperature calibration via the app.
Sprachsteuerung funktioniert nicht Not linked to Alexa/Google Home, incorrect device name, internet connectivity issues.
  • Stellen Sie sicher, dass Ihr Tuya Smart/Smart Life-Konto korrekt mit Alexa/Google Home verknüpft ist.
  • Verwenden Sie genau den in der App konfigurierten Gerätenamen.
  • Überprüfen Sie Ihre Internetverbindung.

Technische Daten

Besonderheit Detail
Marke MIUCDA
Modellnummer TRV10-WIFI
Farbe Schwarz
Stromquelle Battery Powered (3x AA 1.5V Alkaline)
Konnektivitätstechnologie WLAN (Wi-Fi 2.4GHz)
Controllertyp Amazon Alexa, Google Home, Mobile App (Tuya Smart/Smart Life)
Besondere Merkmale Dimmable Display, Programmable, Frost Protection, Open Window Detection, Temperature Calibration
Temperaturregelungstyp Heizung
Artikelgewicht 230 g
Verpackungsabmessungen 14 x 7.7 x 6.7 cm

Garantieinformationen

MIUCDA products typically come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official MIUCDA webBewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.

Kundenservice

If you encounter any issues or have questions regarding your MIUCDA Smart WiFi Radiator Thermostat, please refer to the troubleshooting section of this manual. If the problem persists, contact MIUCDA customer support through their official website or the contact information provided in your product packaging. Please have your model number (TRV10-WIFI) and purchase details ready when contacting support.