Product Overview
The Philips Surge Protector Power Strip is designed to expand your power options and protect your electronic devices. This unit features eight adapter-spaced grounded outlets and two 2.4A USB-A charging ports, allowing you to power and charge multiple devices simultaneously. It includes an 8-foot braided extension cord for flexible placement and a flat plug for space-saving installation. With a 1500 Joule surge protection rating, an integrated circuit breaker, and automatic shutdown technology, this power strip safeguards your electronics from voltage spikes and circuit overloads.
Image: The Philips Surge Protector Power Strip, featuring eight outlets and a durable braided power cord.
Key Features
- 8 Adapter-Spaced Outlets: Provides ample space for bulky power adapters without blocking adjacent outlets.
- 2 USB-A Charging Ports: Offers 2.4A charging for smartphones, tablets, and other USB-powered devices.
- 1500 Joule Surge Protection: Protects connected electronics from damaging voltage spikes.
- Integrated Circuit Breaker: Automatically cuts power to prevent overloads.
- Automatic Shutdown Technology: Disconnects power if surge protection components expire.
- 8-Foot Braided Extension Cord: Durable, tangle-resistant cord for extended reach.
- Space-Saving Flat Plug: Allows furniture to be placed closer to the wall.
- Protected Indicator Light: Confirms that surge protection is active and functioning.
Image: A visual representation of the surge protector's features, including 8 adapter-spaced outlets, 2160 Joules protection rating (note: product description states 1500 Joules, use product description value for consistency), power switch with circuit breaker, protected indicator light, flat plug, and 8 ft cord.
Image: The adapter-spaced outlets on the power strip, demonstrating how bulky adapters can be plugged in without obstructing other outlets.
Video: An official overview of the Philips 8-Outlet Surge Protector, highlighting its adapter-spaced design and features.
Setup Instructions
- Unpack the Device: Carefully remove the surge protector from its packaging.
- Choose a Location: Select a dry indoor location near the devices you intend to power. Ensure the 8-foot cord can reach a grounded wall outlet without being stretched or obstructed.
- Plug into Wall Outlet: Insert the surge protector's flat plug firmly into a standard 3-prong grounded 120V AC wall outlet.
- Verify Protection: Check that the blue "Protected" indicator light on the surge protector illuminates. This confirms that the surge protection is active.
- Connect Devices: Plug your electronic devices into the available outlets and USB ports. The adapter-spaced design accommodates larger power bricks.
- Wall Mounting (Optional): If desired, use the keyhole slots on the back of the surge protector to mount it to a wall or desk using appropriate screws (not included). Ensure the mounting surface is secure.
Image: The surge protector in an office setting, powering various small household devices and electronics, demonstrating its utility.
Image: A split image showing the keyholes on the back of the unit for wall mounting and the space-saving flat plug inserted into a wall outlet.
Operating Instructions
Once the surge protector is properly set up and plugged into a grounded wall outlet, it is ready for use. The blue indicator light confirms active surge protection.
- Powering Devices: Insert the power cords of your electronic devices into any of the eight available AC outlets. The adapter-spaced design ensures that even large power bricks can be accommodated without blocking other outlets.
- USB Charging: Connect your USB charging cables to the two 2.4A USB-A ports to charge compatible devices such as smartphones, tablets, and smartwatches.
- Power Switch: The surge protector features an integrated power switch that also functions as a circuit breaker. Press the switch to turn the power strip ON or OFF. In case of an overload, the circuit breaker will trip, and the switch will pop out, cutting power to connected devices.
- Protected Indicator Light: The blue LED light indicates that the surge protection components are active and providing protection. If this light is off, the surge protection has been compromised, and the unit should be replaced.
Maintenance
To ensure optimal performance and longevity of your Philips Surge Protector, follow these simple maintenance guidelines:
- Cleaning: Disconnect the surge protector from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Inspection: Periodically inspect the power cord and the surge protector housing for any signs of damage, such as fraying, cuts, or cracks. If damage is found, discontinue use and replace the unit.
- Environment: Use the surge protector indoors only, in a dry environment. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
- Overload Prevention: Do not exceed the electrical ratings of the surge protector. Be mindful of the total wattage of devices plugged in.
Troubleshooting
If you encounter issues with your Philips Surge Protector, refer to the following common troubleshooting steps:
- No Power to Devices:
- Ensure the surge protector is firmly plugged into a working grounded wall outlet.
- Check if the power switch on the surge protector is in the "ON" position. If it has tripped (popped out), reset it by pressing it back in.
- Verify that the wall outlet itself is functioning by plugging in another device directly.
- Check the circuit breaker in your home's electrical panel.
- Protected Indicator Light is Off:
- If the blue "Protected" indicator light is off, it means the surge protection components have absorbed a significant surge and are no longer providing protection. While the power strip may still supply power, your devices are no longer protected from future surges. The unit should be replaced immediately.
- USB Ports Not Charging:
- Ensure the surge protector is powered on and the indicator light is active.
- Try a different USB cable or device to rule out a faulty cable or device.
- Confirm the device requires 2.4A charging or less.
If these steps do not resolve the issue, please refer to the Customer Support section.
Technical Specifications
| Brand | PHILIPS |
| Model Number | SPP3673B/37-T1 |
| Color | Black |
| Total Power Outlets | 8 (7 grounded outlets + 1 for cord) - Note: Product description states 7 grounded outlets, while images and other specs state 8. Using 8 as per product title and main image. |
| USB Ports | 2 USB-A |
| USB Output | 2.4A (Maximum Current) |
| Surge Protection Rating | 1500 Joules |
| Cord Length | 8 Feet |
| Plug Type | Type B (3-prong, flat plug) |
| Voltage | 120V AC (Standard US) |
| Special Features | Surge Protection, Integrated Circuit Breaker, Adapter-Spaced Outlets, Braided Cord, Flat Plug |
| Certifications | ETL Listed |
Warranty Information
This Philips Surge Protector is backed by a Limited Lifetime, No-Hassle Replacement Plan. Additionally, it includes a $150,000 Connected Equipment Warranty (CEW) policy for added peace of mind. Please retain your proof of purchase for warranty claims.
For detailed terms and conditions of the Limited Lifetime Warranty and the Connected Equipment Warranty, please refer to the documentation included with your product or visit the official Philips support website.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact Philips customer service. Contact information can typically be found on the product packaging, the official Philips website, or by searching for "Philips customer support" online.
When contacting support, please have your product model number (SPP3673B/37-T1) and proof of purchase readily available.
