On the DieseRC EW-4CH Bluetooth remote, can I disable the 'All-on' and 'All-off' buttons to use only channels 1 through 4? Also, can I rename the channel buttons in the eWelink app to custom names like 'Gate Open'?

Based on the manual for the DieseRC EW-4CH and the standard functionality of the eWelink app, here are the answers to your questions:1. Disabling 'All-on' and 'All-off' buttons: The RM2.4G Bluetooth remote is a fixed-function hardware accessory. The manual does not provide a method to disable or unbind specific buttons like 'All-on' or 'All-off' while keeping the individual channel buttons active. These buttons are typically hardcoded to broadcast a command to all paired relays on the module.2. Renaming channel buttons in the App: Yes, you can rename the channels in the eWelink APP. To do this: Open the eWelink app and select your EW-4CH device.Tap the three dots (...) or the settings icon in the top right corner.Look for "Channel Name" or "Settings".Select the specific channel (e.g., Channel 1) and type in your custom name, such as "Slagboom open" (Gate open).If you find the 'All-on' button on the remote is causing safety issues with your gate, it is recommended to rely primarily on the App or voice control where you have more granular control over individual actions.

DieseRC EW-4CH 4-Channel WiFi Smart Switch User Manual

Einführung

The DieseRC EW-4CH is a versatile 4-channel WiFi smart switch relay module designed for remote control and automation of various electrical devices. It offers stable and reliable performance with high reception sensitivity via 2.4 GHz WiFi. This module allows you to control devices from anywhere using the eWelink APP and integrates with voice assistants like Amazon Alexa and Google Home. It supports both inching and self-locking operating modes, providing flexibility for different applications.

The module features four independent relays with potential-free (dry) contacts, each rated for 10A. It can be powered by DC 5V (via USB) or DC 7V-48V (via terminal block), making it compatible with a wide range of power sources and applications.

Abbildung 1: Überview of the DieseRC EW-4CH 4-Channel WiFi Smart Switch Module.

Sicherheitshinweise

Vor der Installation oder Verkabelung muss unbedingt die Stromversorgung unterbrochen werden, um einen Stromschlag zu vermeiden.
This device operates with electrical currents. Improper installation or use can be dangerous.
Do not exceed the maximum current rating of 10A per relay.
Ensure proper insulation for all connections.
Betreiben Sie das Gerät innerhalb der angegebenen Lautstärke.tage range (DC 5V or DC 7V-48V).
Halten Sie das Gerät von Wasser, Feuchtigkeit und extremen Temperaturen fern.
Wenn Sie sich bezüglich der Verdrahtungsvorgänge unsicher sind, konsultieren Sie einen qualifizierten Elektriker.

Aufstellen

1. Physische Installation und Verkabelung

The EW-4CH module is compact (65x48x17 mm) and can be easily hidden in most electrical boxes or junction boxes. It offers flexible power input options and passive output relays.

Detaillierte view of DieseRC EW-4CH module components and power inputs

Figure 2: Module components including relay indicator lights, WiFi indicator, pairing button, USB input, and terminal definitions (NO, COM, NC).

Leistungsaufnahme: Das Modul kann auf zwei Arten mit Strom versorgt werden:

Via Micro USB: DC 5V/0.5A.
Via Terminal Block: DC 7V-48V/0.5A.

Relaisanschlüsse: Each of the four relays has three terminals:

NO (Normalerweise offen): The circuit is open when the relay is off, and closes when the relay is activated.
COM (Gemeinsamer Typ): Der gemeinsame Anschluss für das Relais.
NC (Normalerweise geschlossen): The circuit is closed when the relay is off, and opens when the relay is activated.

Diagram showing DC 7V-48V terminal power input and DC 5V USB power input options for the module.

Figure 3: Power input options: DC 7V-48V via terminal or DC 5V via USB.

Four wiring diagrams for DC and AC devices with the smart switch module

Abbildung 4: Bspamples of wiring modes for DC devices (lamps, motors) and AC devices (lamps, motors) using the module's passive output relays.

2. eWelink APP Installation

The smart switch is controlled via the eWelink APP, available for Android and iOS devices.

Download the eWelink APP from your device's app store or scan the QR code below.
Erstellen Sie ein Konto oder melden Sie sich an, wenn Sie bereits eines haben.

Figure 5: Scan this QR code to download the eWelink APP. Alternatively, visit http://app.coolkit.cc/dl.html.

3. Gerätekopplung

Power on the EW-4CH module.
Open the eWelink APP and tap the '+' icon to add a device.
Follow the in-app instructions to put the device into pairing mode (usually by pressing and holding the pairing button on the module until the WiFi indicator light blinks).
Connect the device to your 2.4 GHz WiFi network.

Betriebsarten

The EW-4CH supports two main operating modes: Inching (Momentary) and Self-locking (Toggle).

Schrittmodus: The relay activates for a set duration (e.g., 0.5 to 3600 seconds) and then automatically deactivates. This is suitable for applications like garage door openers or pulse-triggered devices.
Selbstverriegelungsmodus: The relay toggles its state with each activation. One press turns it on, another press turns it off. This is suitable for traditional on/off control of lights or appliances.

You can configure these modes within the eWelink APP for each relay independently.

Comparison of smart switch module with traditional toggle and push buttons

Figure 6: The smart switch module can function as a control interface similar to traditional switches or buttons.

APP-Steuerung

Control your connected devices anytime, anywhere using the eWelink APP on your smartphone (Android and iOS).

Smartphone controlling a garage door remotely via eWelink APP

Figure 7: Remote control of devices via the eWelink APP, demonstrating control of a garage door from a beach location.

Sprachsteuerung

The EW-4CH is compatible with Amazon Alexa and Google Home, allowing for hands-free control of your devices.

Verknüpfen Sie Ihr eWelink-Konto mit Amazon Alexa oder Google Home über die jeweiligen Apps.
Use voice commands such as "Alexa, turn on the light" or "Hey Google, open the garage door."

Voice control setup with Amazon Echo and Google Home devices

Figure 8: Voice control integration with Amazon Alexa and Google Home for convenient device operation.

Terminplanung und Timer

The eWelink APP allows you to set schedules, timers, and countdowns for automated operation of your devices.

eWelink APP interface showing timing, schedule, and countdown functions

Abbildung 9: Bspample of setting a schedule to automatically open and close lights using the eWelink APP.

Optionale Fernbedienung

The smart switch is compatible with an optional RM2.4G Bluetooth remote control (not included) for additional control flexibility.

Multiple control modes including APP, voice, and Bluetooth remote control

Abbildung 10: Überview of various control methods: APP, voice, and optional Bluetooth remote control.

Wartung

Halten Sie das Gerät sauber und staubfrei. Verwenden Sie zum Reinigen ein trockenes, weiches Tuch.
Das Gerät sollte keiner direkten Sonneneinstrahlung, hoher Luftfeuchtigkeit oder korrosiven Umgebungen ausgesetzt werden.
Überprüfen Sie regelmäßig die Kabelverbindungen, um sicherzustellen, dass sie fest sitzen.
Ensure the device has adequate ventilation if installed in an enclosed space.

Fehlerbehebung

Gerät verbindet sich nicht mit WLAN:

Stellen Sie sicher, dass Ihr WLAN-Netzwerk mit 2.4 GHz arbeitet. Das Gerät unterstützt kein 5-GHz-WLAN.
Check if the WiFi signal strength is adequate at the device's location.
Verify your WiFi password is entered correctly in the eWelink APP.
Try resetting the device to factory settings (refer to the pairing instructions) and re-pairing.

Device not responding to APP/Voice commands:

Check if the device is connected to WiFi (WiFi indicator light should be solid).
Stellen Sie sicher, dass Ihr Smartphone über eine aktive Internetverbindung verfügt.
Verify that the eWelink APP is updated to the latest version.
For voice control, ensure your eWelink account is correctly linked to Alexa/Google Home.

Relay not activating/deactivating:

Überprüfen Sie die Stromversorgung des Moduls.
Verify the wiring connections to the load are correct (NO, COM, NC).
Ensure the load's current draw does not exceed 10A.
Check the operating mode settings (Inching/Self-locking) in the eWelink APP.

Technische Daten

Marke	DieseRC
Modellnummer	EW-4CH
Technische Daten	65 x 48 x 17 mm (2.6 x 1.9 x 0.7 Zoll)
Gewicht	60 g
Eingangslautstärketage	DC 5V (USB) or DC 7V-48V (Terminal)
Ausgabetyp	Passiver Ausgang (trockene Kontakte)
Nennstrom des Relais	10 Ampere per channel
Kontakttyp	Normally Open (NO), Normally Closed (NC), Common (COM)
Konnektivität	2.4 GHz WiFi
Steuerungsmodi	APP Control (eWelink), Voice Control (Alexa/Google Home), Optional Bluetooth Remote Control
Betriebsarten	Inching (Momentary), Self-locking (Toggle)

Garantie

This product comes with a standard manufacturer's warranty. Please refer to the product packaging or contact DieseRC customer support for specific warranty terms and conditions.

Unterstützung

For technical assistance, troubleshooting, or further inquiries, please contact DieseRC customer support through their official website or the contact information provided with your purchase. Ensure you have your product model number (EW-4CH) ready when seeking support.

DieseRC EW-4CH