Dexnor iPad Pro 12.9 Inch Case Instruction Manual

1. Produktüberschreitungview

This manual provides instructions for the Dexnor Heavy Duty Shockproof Dual Layer Full-Body Bumper Protective Cover for iPad Pro 12.9 Inch. This case is designed to offer robust protection, featuring a built-in screen protector, an integrated pen holder, and a versatile kickstand for various viewwinkeln.

2. Kompatibilität

This Dexnor case is specifically designed for the following iPad Pro 12.9 inch models:

• iPad Pro 12.9 inch (6th Generation, 2022) - Model Numbers: A2436, A2437, A2764, A2766
• iPad Pro 12.9 inch (5th Generation, 2021) - Model Numbers: A2378, A2379, A2461, A2462
• iPad Pro 12.9 inch (4th Generation, 2020) - Model Numbers: A2229, A2069, A2232, A2233

Please verify your iPad model number before installation to ensure proper fit.

3. Packungsinhalt

Das Paket beinhaltet:

• 1x Dexnor iPad Pro 12.9 Inch Case (with integrated screen protector)

4. Einrichtung und Installation

Follow these steps to install your Dexnor iPad Pro 12.9 Inch case:

1. Trennen Sie das Gehäuse: Carefully detach the front frame from the back cover. The case is designed with a soft TPU frame for easy installation.
2. iPad reinigen: Ensure your iPad Pro screen and back are clean and free of dust or debris.
3. Vorderrahmen montieren: Place your iPad Pro into the front frame, ensuring all edges are securely seated. The built-in screen protector should align perfectly with your iPad's display.
4. Rückseite anbringen: Align the front frame (with your iPad inside) with the back cover. Press firmly around the edges until the two parts snap together, creating a secure, full-body enclosure.

5. Bedienungsanleitung

5.1 Verwendung des Ständers

Der integrierte Ständer ermöglicht freihändiges Arbeiten viewing and typing. To use:

1. Suchen Sie den Aufsteller auf der Rückseite des Gehäuses.
2. Gently pull the kickstand outwards until it locks into your desired viewing angle. The kickstand is designed to be stable and durable, supporting both horizontal and vertical orientations.
3. When finished, push the kickstand back into its recess until it sits flush with the case.

5.2 Verwendung des Stifthalters

The case includes a dedicated holder for your stylus pen:

• Insert your stylus pen into the designated slot on the side of the case.
• The holder is designed for easy insertion and removal, keeping your pen secure and accessible.

5.3 Built-in Screen Protector

The integrated screen protector is designed to prevent scratches and minor impacts without affecting touch sensitivity. Ensure the screen is clean before installation for optimal performance.

6. Wartung

To maintain your Dexnor iPad Pro case:

• Reinigen Sie das Gehäuse regelmäßig mit einem weichen, fusselfreien Tuch.amp Tuch.
• Avoid using abrasive cleaners or harsh chemicals, as these may damage the material or finish.
• Periodically check for any debris accumulation around ports and buttons and clean as necessary.

7. Fehlerbehebung

• Kickstand Stiffness: If the kickstand feels stiff or difficult to open/close, gently work it back and forth a few times. Ensure no foreign objects are obstructing its mechanism.
• Screen Protector Sensitivity: If you experience reduced touch sensitivity, remove the iPad from the case, thoroughly clean both the iPad screen and the built-in screen protector, and then re-install the case, ensuring a snug fit without air bubbles.
• Lockere Passform: If the case feels loose, double-check that both the front frame and back cover are securely snapped together around all edges of your iPad.

8. Spezifikationen

9. Garantie und Support

For detailed warranty information and customer support, please refer to the product packaging or contact Dexnor directly through their official website. You may also reach out to the retailer where the product was purchased for assistance.