1. Einleitung und Sicherheitshinweise
Thank you for choosing the Mondeer Modern Dining Table. This manual provides essential information for the safe assembly, use, and maintenance of your new table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Sicherheitshinweise:
- Für die Montage sind zwei Personen erforderlich. Do not attempt to assemble alone to prevent injury or damage to the product.
- Do not place hot objects directly on the tempered glass surface. Always use coasters or protective mats.
- Follow all assembly and usage instructions carefully to avoid injury.
- Halten Sie Kleinteile und Verpackungsmaterialien von Kindern fern.
- Vor Gebrauch sicherstellen, dass alle Schrauben und Befestigungselemente fest angezogen sind. Regelmäßig überprüfen und gegebenenfalls nachziehen.
- The table has a maximum recommended weight capacity of 150 kg (330 lbs). Do not exceed this limit.
Packungsinhalt:
Vor der Montage prüfen Sie, ob alle Komponenten vorhanden und unbeschädigt sind. Die Verpackung sollte Folgendes enthalten:
- 1 x Dining Tabletop
- 4 x Tischbeine
- 1 x Hardware Kit (screws, washers, adjustable feet)
- 1 x Bedienungsanleitung (evtl. nicht in deutscher Sprache).
2. Aufbau und Montage
Assembly is straightforward and can be completed in a few simple steps. A screwdriver is recommended for assembly (not included). Two people are required for safe assembly.
Montageschritte:
- Komponenten auspacken: Nehmen Sie alle Teile vorsichtig aus der Verpackung. Legen Sie sie auf eine weiche, saubere Oberfläche, um Kratzer zu vermeiden.
- Beine an der Tischplatte befestigen: Align each table leg with the pre-drilled holes on the underside of the tabletop. Secure each leg using the provided screws and washers from the hardware kit. Ensure all connections are firm but do not overtighten initially.
- Verstellbare Füße montieren: Screw the adjustable feet into the bottom of each table leg. These feet help stabilize the table on uneven surfaces and protect your floor from scratches.
- Abschließendes Anziehen: Once all legs and feet are in place, carefully turn the table upright with the help of another person. Ensure the table is stable, then fully tighten all screws.

Figure 2.1: Table Dimensions (150cm L x 85cm W x 76.5cm H)

Figure 2.2: Adjustable Foot Detail
3. Betrieb und Nutzung
The Mondeer Dining Table is designed for use in dining rooms, kitchens, or living areas, comfortably seating 4 to 6 people. Its modern design with a black tabletop and metal frame complements various interior styles.
Hauptmerkmale:
- Verstellbare Füße: The metal legs are equipped with anti-slip pads that allow for minor height adjustments to ensure stability on uneven floors. These pads also protect your flooring from scratches and reduce noise when moving the table.
- Langlebige Konstruktion: Made from E1 quality particle board and a metal frame, the table offers a stable and robust structure. The black tempered glass insert can withstand temperatures up to 200°C.
- Sicherheitsdesign: The table features rounded edges and corners to minimize impact from accidental bumps, enhancing safety for you and your family.

Figure 3.1: Mondeer Dining Table in a Dining Room

Figure 3.2: Mondeer Dining Table in a Kitchen
4. Wartung und Pflege
Proper care and maintenance will ensure the longevity and appearance of your Mondeer Dining Table.
Reinigungshinweise:
- Tabletop (Tempered Glass & Particle Board): Wischen Sie die Oberfläche mit einem weichen, damp cloth. For stubborn stains, use a mild, non-abrasive cleaner specifically designed for glass or furniture. Dry immediately with a clean, dry cloth to prevent water spots.
- Metal Frame/Legs: Clean with a soft, dry cloth. If necessary, use a slightly damp cloth with a mild detergent, then dry thoroughly.
- Vermeiden Sie die Verwendung von scharfen Chemikalien, Scheuermitteln oder Scheuerschwämmen, da diese die Oberfläche beschädigen können.
Allgemeine Pflegetipps:
- Always use placemats or coasters to protect the tabletop from spills, heat, and scratches.
- Do not drag the table when moving it; always lift it with the help of another person to prevent damage to the legs and floor.
- Überprüfen Sie regelmäßig alle Schrauben und Befestigungselemente, um sicherzustellen, dass sie fest sitzen. Ziehen Sie sie gegebenenfalls nach.
- Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can affect the material.

Figure 4.1: Tempered Glass Surface and Rounded Edges
5. Fehlerbehebung
If you encounter any issues with your Mondeer Dining Table, refer to the following common problems and solutions:
Häufige Probleme:
- Der Tisch wackelt:
Lösung: Check if all screws connecting the legs to the tabletop are securely tightened. Adjust the leveling feet at the bottom of each leg to compensate for uneven flooring. - Scratches on the tabletop:
Lösung: Minor scratches on the particle board surface may be minimized with furniture polish. Deep scratches on tempered glass are difficult to repair and may require professional attention or replacement of the tabletop. Always use protective mats to prevent scratches. - Schwierigkeiten beim Zusammenbau:
Lösung: Re-read the assembly instructions carefully, paying close attention to diagrams. Ensure you have all necessary tools (screwdriver) and that two people are assisting with the assembly. If parts are missing or damaged, contact customer support.
6. Spezifikationen
Detailed specifications for the Mondeer Modern Dining Table N-FDDT08BW-G1L:
| Besonderheit | Detail |
|---|---|
| Modellnummer | N-FDDT08BW-G1L |
| Abmessungen (L x B x H) | 150 cm x 85 cm x 76.5 cm (59.1 x 33.5 x 30.1 Zoll) |
| Artikelgewicht | 28 Kilogramm (61.7 Pfund) |
| Maximalgewichtsempfehlung | 150 Kilogramm (330 Pfund) |
| Sitzplatzkapazität | 4 bis 6 Personen |
| Rahmenmaterial | Metall |
| Tischplattenmaterial | Holzwerkstoff, gehärtetes Glas |
| Farbe | Schwarz |
| Besondere Merkmale | Adjustable Height Feet, Rounded Edges, Stain Resistant |
| Montage erforderlich | Ja (2 Personen empfohlen) |
| Empfohlene Montagewerkzeuge | Schraubendreher (nicht im Lieferumfang enthalten) |
| Nutzungsumgebung | Innenbereich |
7. Garantie und Support
Mondeer is committed to providing high-quality products. While specific warranty details are not provided in this manual, most products come with a manufacturer's warranty against defects in materials and workmanship.
For Warranty Claims and Customer Support:
- Bitte bewahren Sie Ihren Kaufbeleg (Quittung oder Bestellbestätigung) auf.
- Contact the retailer or Mondeer customer service directly for assistance with warranty claims, missing parts, or any product-related inquiries. Refer to the contact information provided at the point of purchase or on the official Mondeer webWebsite.