VEVOR Elektrischer Wagenheber, 5 Tonnen hydraulische Hebebühne mit Schlagschrauber und Reifenfüller (Modell ZSY01-2)

1. Produktüberschreitungview

The VEVOR Electric Car Jack is a versatile tool designed for vehicle lifting, tire changing, and inflation. This integrated system combines a 5-ton hydraulic jack, an electric impact wrench, and a built-in tire inflator, making it suitable for roadside emergencies and garage maintenance for various vehicles including sedans, SUVs, and trucks within its specified weight capacity.

Image 1.1: The VEVOR Electric Car Jack kit, neatly organized in its durable carrying case.

2. Sicherheitshinweise

Lesen und verstehen Sie alle Sicherheitshinweise und Anweisungen, bevor Sie dieses Produkt in Betrieb nehmen. Die Nichtbeachtung dieser Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.

• Always operate the jack on a flat, stable, and non-slippery surface.
• Ensure the vehicle is in park (P) and the parking brake is engaged before lifting.
• Die maximale Tragfähigkeit von 5 Tonnen (11023 lbs) darf niemals überschritten werden.
• Do not place any part of your body under a vehicle supported only by the jack. Always use appropriate jack stands to support the vehicle after lifting.
• Halten Sie Hände, Füße und Kleidung während des Betriebs von beweglichen Teilen fern.
• Do not modify the product or use it for purposes other than its intended use.
• Halten Sie Kinder und Zuschauer vom Arbeitsbereich fern.
• Sorgen Sie für ausreichende Belüftung bei Arbeiten in geschlossenen Räumen.
• Bei Nichtgebrauch oder während Wartungsarbeiten die Stromzufuhr unterbrechen.

Image 2.1: The electric car jack positioned under a vehicle, highlighting the importance of simple operation and overload protection for safety.

3. Lieferumfang

Carefully unpack all components and ensure all items are present and undamaged.

• 1 x Electric Car Jack
• 1 x Stromkabel (12 m)
• 1 x Battery Clip
• 1 x Elektrischer Schlagschrauber
• 2 x Sleeves (17/19 mm & 21/23 mm)
• 1 x Safety Rescue Hammer
• 1 x Six-angle Spanner
• 1 x Air Filling Nozzle Set (3 nozzles)
• 2 x Handschuhe
• 2 x Fuse Wires (12A)
• 1 x Tragetasche
• 1 x Benutzerhandbuch

Image 3.1: All included accessories and tools for the VEVOR Electric Car Jack system.

4. Spezifikationen

Image 4.1: Visual representation of the product dimensions and key specifications for the electric jack, wrench, and air inflator.

5. Einrichtung und Stromanschluss

5.1 Stromversorgung des Geräts

The VEVOR Electric Car Jack can be powered via two methods:

• Car Cigarette Lighter: Connect the power cable to the 12V cigarette lighter socket in your vehicle.
• Autobatterie: Use the provided battery clips to connect directly to your car's 12V battery terminals (red clip to positive, black clip to negative). This method is generally more stable for prolonged use.

Image 5.1: Illustration of connecting the electric jack to a car's cigarette lighter or directly to the car battery.

5.2 Erstplatzierung

Before operating, ensure the jack is placed on a firm, level surface. Position the jack directly under the vehicle's designated lifting point, ensuring the jack head makes secure contact with the vehicle's frame or jacking point. The jack must be perpendicular to the vehicle.

6. Bedienungsanleitung

6.1 Electric Jack Operation

1. Connect the power cable to the jack and then to your chosen power source (cigarette lighter or car battery).
2. Position the jack securely under the vehicle's lifting point.
3. Press the 'U' (Up) button on the jack's control panel to raise the vehicle. The jack will automatically stop when it reaches its maximum height or if an overload is detected.
4. Once the desired height is reached, immediately place jack stands under the vehicle for safety. Never work under a vehicle supported only by the jack.
5. To lower the vehicle, ensure the area is clear, then press the 'D' (Down) button.
6. After lowering, press the 'O' (Close) button to fully retract the jack.

Image 6.1: The electric jack demonstrating its minimum and maximum lifting heights, along with the control panel for 'Up', 'Down', and 'Close' functions.

6.2 Electric Impact Wrench Operation

The electric impact wrench is designed for quick removal and tightening of lug nuts.

1. Select the appropriate sleeve (17/19 mm or 21/23 mm) for your lug nuts and attach it to the wrench's 1/2 inch anvil.
2. Connect the impact wrench to the power cable.
3. For loosening, set the switch to the 'Loosen' position. For tightening, set it to 'Tighten'.
4. Place the sleeve onto the lug nut and press the power button. The wrench will apply torque to remove or tighten the nut.
5. After initial tightening with the impact wrench, always use a manual lug wrench to ensure lug nuts are tightened to the vehicle manufacturer's specified torque.

Image 6.2: The electric impact wrench in operation, showing the available sleeve sizes and the tighten/loosen switch.

6.3 Tire Inflator Operation

The built-in tire inflator can be used to inflate tires or other inflatable items.

1. Connect the inflator hose to the tire valve stem. Ensure a tight seal.
2. Connect the jack unit to a 12V power source.
3. Turn on the inflator switch (usually marked 'AIR' or with an inflation icon) on the jack's control panel.
4. Monitor the tire pressure gauge on the unit. Inflate to the vehicle manufacturer's recommended PSI.
5. Once the desired pressure is reached, turn off the inflator switch and disconnect the hose.
6. Use the included extra nozzles for inflating other items like sports balls or air mattresses.

Image 6.3: The tire inflator in use, displaying the precise tire pressure gauge and the various inflation nozzles.

7. Wartung

Regular maintenance ensures the longevity and safe operation of your VEVOR Electric Car Jack.

• Reinigung: After each use, wipe down the jack, wrench, and accessories with a clean, dry cloth to remove dirt, grease, or moisture.
• Lagerung: Store all components neatly in the provided carrying case in a dry, cool place, away from direct sunlight and corrosive materials.
• Kabelinspektion: Periodically inspect power cables and battery clips for any signs of damage, fraying, or corrosion. Replace if necessary.
• Sicherungswechsel: If the unit stops working, check the fuse in the power cable. Replace it with one of the spare 12A fuses provided. Ensure the replacement fuse is of the correct rating.
• Hydraulikflüssigkeit: The hydraulic system is sealed and generally does not require user maintenance. If you suspect a leak or malfunction, contact customer support.

8. Fehlerbehebung

If you encounter issues with your VEVOR Electric Car Jack, refer to the following common troubleshooting steps:

• Jack not lifting/operating:
  • Check power connection: Ensure the power cable is securely connected to both the jack and the 12V power source (cigarette lighter or battery).
  • Verify power source: Confirm the vehicle's 12V outlet or battery is providing power.
  • Check fuse: Inspect the fuse in the power cable. Replace if blown with a 12A fuse.
  • Overload protection: Ensure the vehicle weight does not exceed the 5-ton capacity.
• Wagenheber senkt sich nicht ab:
  • Ensure the 'D' (Down) button is pressed firmly.
  • Check for obstructions under the jack or vehicle.
  • If the jack is stuck, gently apply downward pressure to the vehicle while pressing the 'D' button (only if safe to do so and vehicle is supported by jack stands).
• Impact wrench not working/spinning:
  • Stellen Sie sicher, dass das Netzkabel fest angeschlossen ist.
  • Verify the correct sleeve is attached and properly seated.
  • Check the direction switch (tighten/loosen) is correctly set.
  • Confirm the lug nut is not seized. Manual loosening with a breaker bar may be required first.
• Tire inflator not working/inflating:
  • Check power connection and fuse.
  • Ensure the inflator hose is securely attached to the tire valve stem without leaks.
  • Verify the inflator switch is turned on.

Sollten die Probleme nach Durchführung dieser Schritte weiterhin bestehen, wenden Sie sich bitte an den VEVOR-Kundendienst, um Unterstützung zu erhalten.

9. Garantie und Support

VEVOR products are designed for durability and performance. For warranty information, product registration, or technical support, please refer to the official VEVOR webBesuchen Sie die Website oder wenden Sie sich direkt an den Kundendienst. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für eventuelle Garantieansprüche auf.

Kontaktinformationen: Bitte besuchen Sie die offizielle VEVOR-Website. webAuf dieser Website finden Sie die aktuellsten Kontaktdaten und Support-Ressourcen.

10. Wichtiger Hinweis zu Videos

The provided product data indicated the presence of videos; however, specific embeddable URLs (e.g., m3u8 format) and creator type information were not available. Therefore, no instructional videos could be embedded in this manual. For visual guides, please refer to the official VEVOR product page or support channels.