Casio Wave Ceptor Illuminator Multi Band Uhr WV-200R-5ACF Benutzerhandbuch

Einführung

This manual provides detailed instructions for the operation and maintenance of your Casio Wave Ceptor Illuminator Multi Band Watch, model WV-200R-5ACF. Please read this manual carefully to ensure proper use and to fully utilize all features of your watch.

Image: Casio Wave Ceptor Illuminator Multi Band Watch WV-200R-5ACF Beige. This image displays the watch face and strap, highlighting its digital display and overall design.

Aufstellen

1. Initial Time Setting (Atomic Timekeeping)

Your watch is equipped with Multi Band 6 atomic timekeeping, which automatically receives time calibration signals from six transmission stations around the world. This ensures accurate time display.

• Ensure the watch is exposed to an open area, away from metal objects or electronic devices that may interfere with signal reception.
• The watch will attempt to receive the calibration signal automatically between midnight and 5:00 AM daily.
• To manually initiate reception, refer to the "Time Calibration Signal Reception" section in the detailed module manual (available on the Casio webSeite? ˅).

2. Manual Time and Date Setting

If atomic timekeeping is not available or desired, you can set the time and date manually.

1. Im Zeitmessmodus die Taste gedrückt halten ANPASSEN button (usually top-left) until the city code starts flashing.
2. Verwenden Sie die MODUS button (usually bottom-left) to cycle through settings: City Code, DST (Daylight Saving Time), 12/24-hour format, Seconds, Hour, Minute, Year, Month, Day.
3. Verwenden Sie die SUCHEN Und UMKEHREN buttons (usually top-right and bottom-right) to change the flashing values.
4. Sobald alle Einstellungen korrekt sind, drücken Sie die Taste ANPASSEN erneut drücken, um den Einstellmodus zu verlassen.

3. World Time Setup

The watch can display the current time in 29 different time zones (48 cities).

• Enter the World Time Mode by pressing the MODUS Taste.
• Verwenden Sie die SUCHEN Und UMKEHREN Schaltflächen zum Durchblättern der verfügbaren Stadtcodes.
• To toggle Daylight Saving Time (DST) for a specific city, press the ANPASSEN button while the city code is displayed.

Bedienung der Uhr

1. Modusnavigation

Drücken Sie die MODUS button (bottom-left) to cycle through the different modes:

• Zeitnehmungsmodus: Zeigt die aktuelle Uhrzeit, das Datum und den Wochentag an.
• Weltzeitmodus: Zeigt die aktuelle Uhrzeit in verschiedenen Städten rund um den Globus an.
• Alarmmodus: Set up to 5 daily alarms and an hourly-Zeitsignal.
• Stoppuhr-Modus: Misst die verstrichene Zeit, Zwischenzeiten und zwei Zielankünfte.
• Timer-Modus: Countdown timer with a range of 1 minute to 24 hours.

2. Using the Illuminator

The watch features an Illuminator for visibility in low-light conditions.

• Drücken Sie die LICHT button (usually top-right or front center) to illuminate the display.
• The illumination duration can be adjusted in the settings.

3. Wasserdichtigkeit (200 m)

Your watch is water resistant to 200 meters (20 BAR), making it suitable for swimming, showering, and snorkeling.

• Die Knöpfe dürfen nicht betätigt werden, solange die Uhr nass oder unter Wasser ist.
• Vermeiden Sie es, die Uhr heißem Wasser oder Dampf auszusetzen, da dies die Wasserdichtigkeit beeinträchtigen kann.
• Nach Kontakt mit Salzwasser die Uhr mit Süßwasser abspülen und trocken wischen.

Wartung

1. Reinigen Sie Ihre Uhr

Regelmäßige Reinigung trägt dazu bei, das Aussehen und die Lebensdauer Ihrer Uhr zu erhalten.

• Reinigen Sie das Uhrengehäuse und das Armband mit einem weichen, trockenen Tuch.
• For resin bands, you can use a mild soap solution and a soft brush, then rinse thoroughly with water and dry.
• Vermeiden Sie die Verwendung aggressiver Chemikalien oder Scheuermittel.

2. Batteriewechsel

The watch is powered by a battery. When the display becomes dim or the watch stops functioning, it may be time for a battery replacement.

• Battery replacement should ideally be performed by an authorized Casio service center to ensure proper sealing and water resistance.
• Attempting to replace the battery yourself may void the warranty and compromise the watch's water resistance.

Fehlerbehebung

• Die Uhrzeit ist falsch oder wird nicht synchronisiert:

  Ensure the watch is in an area with good signal reception, away from strong magnetic fields or electronic interference. Verify your home city setting is correct. If automatic reception fails, try manual time setting.

• Das Display ist dunkel oder leer:

  This may indicate a low battery. Contact an authorized service center for battery replacement.

• Tasten reagieren nicht:

  Ensure the watch is not in a locked mode (if applicable, refer to the full module manual). If the watch was recently exposed to water, ensure it is completely dry. If the issue persists, seek professional service.

Technische Daten

Garantieinformationen

Your Casio WV-200R-5ACF watch comes with a Limited Warranty. The specific terms and duration of the warranty are provided with your purchase in the included "Warranty Information" document.

Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

For detailed warranty terms and conditions, please refer to the official Casio weboder der in Ihrer Produktverpackung enthaltenen Garantiekarte.

Unterstützung

For further assistance, detailed module instructions, or service inquiries, please visit the official Casio support webWebsite.

• Offizielles Casio WebWebsite: www.casio.com
• Modulnummer: Refer to the back of your watch or the included manual for the specific module number (e.g., 3134, 3135) to find the exact digital manual.
• Enthaltene Komponenten: Your product package includes a User Manual and Warranty Information.