1. Einleitung
The Artograph LED Tracer Opaque Art Projector is designed to assist artists and crafters in enlarging and tracing images. This portable device allows you to project flat artwork from 2 times up to 14 times its original size onto a vertical surface such as a wall or easel. It is suitable for various applications including sketching, outlining, creating murals, and transferring patterns.
This manual provides essential information for the safe and effective use of your LED Tracer projector. Please read it thoroughly before operation.
Figure 1: Artograph LED Tracer Opaque Art Projector, front-side view.
2. Sicherheitshinweise
- Stromversorgung: Use only the provided low voltage power adapter (12V, 1.5 AMP) and 6.5-foot long cord. Ensure the power outlet is easily accessible and properly grounded.
- Belüftung: Do not block the ventilation openings on the projector. Adequate airflow is necessary to prevent overheating.
- Hitze: The projector's casing may become warm to the touch after extended use. This is normal. If it becomes excessively hot, discontinue use and allow it to cool down.
- Platzierung: Place the projector on a stable, flat surface to prevent it from falling.
- Feuchtigkeit: Halten Sie den Projektor von Wasser und anderen Flüssigkeiten fern. Betreiben Sie ihn nicht in der Sonne.amp Umgebungen.
- Kinder: This device is not a toy. Keep out of reach of small children.
3. Packungsinhalt
Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:
- Artograph LED Tracer Opaque Art Projector
- 6.5-foot long power cord with standard 120V grounded plug
- Geringe Lautstärketage power adapter (12V, 1.5 AMP)
- Integrated 200mm optical glass lens
4. Einrichtung
- Auspacken: Entnehmen Sie vorsichtig alle Komponenten aus der Verpackung.
- Position Projektor: Place the LED Tracer on a stable, flat surface. Ensure there is enough space for your artwork underneath and a clear path for the projection onto your desired vertical surface (wall, easel, canvas).
- Strom anschließen: Schließen Sie den Lautstärkeregler antage power adapter to the projector's power input port. Plug the 6.5-foot power cord into a standard 120V grounded electrical outlet.
- Prepare Artwork: Place the artwork you wish to project directly underneath the projector's opening. The maximum copy size for the artwork is 5 inches by 5 inches.
Figure 2: Projector setup with artwork placed underneath.
5. Bedienungsanleitung
- Einschalten: Press the power button, typically located on the top of the projector, to turn on the LED light source.
- Adjust Projection Distance: Move the projector closer to or further away from the vertical surface to adjust the size of the projected image. The projector can enlarge images from 2 times up to 14 times the original size.
- Focus Image: Rotate the lens barrel at the front of the projector to bring the projected image into sharp focus.
- Ablaufverfolgung: Once the image is focused and at the desired size, you can begin tracing or outlining on your chosen surface.
Tipps für beste Ergebnisse:
- Dunkle Umgebung: For maximum visibility and clarity of the projected image, operate the projector in a dark room. Ambient light significantly impacts projection performance.
- Large Designs: When working with larger designs or prints, it is recommended to work in sections.
- Bildkontrast: Images with good contrast and clarity will project more effectively.
Figure 3: Easy operation steps: Place, Project, Trace.
Figure 4: Adjusting the focus lens for a clear projection.
6. Wartung
- Reinigung der Linse: Wischen Sie die Projektorlinse vorsichtig mit einem weichen, fusselfreien Tuch ab, das speziell für optische Linsen entwickelt wurde. Vermeiden Sie Scheuermittel oder aggressive Chemikalien.
- Reinigung des Casing: Wischen Sie die Außenseite des Projektors mit einem weichen, trockenen Tuch ab. Verwenden Sie keine flüssigen Reinigungsmittel direkt auf dem Gerät.
- Lagerung: Bewahren Sie den Projektor bei Nichtgebrauch an einem kühlen, trockenen Ort, fern von direkter Sonneneinstrahlung und übermäßigem Staub auf.
- LED-Lebensdauer: The integrated LED light source has a lifespan of up to 10,000 hours and does not require replacement.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Bild projiziert | Projector not powered on; Power cord not connected; Power outlet issue. | Ensure power button is pressed. Check power cord connections. Test outlet with another device. |
| Bild ist verschwommen | Lens out of focus; Projector too close/far from surface. | Rotate the lens barrel to adjust focus. Adjust the distance between the projector and the projection surface. |
| Projected image is dim | Too much ambient light; Low contrast artwork. | Operate in a darker room. Use artwork with higher contrast. |
| Projector feels hot | Extended use; Blocked ventilation. | Discontinue use and allow to cool. Ensure ventilation openings are clear. |
8. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | 25370 |
| Technische Daten | 12.75" B x 9" T x 9" H (32.39 cm x 22.86 cm x 22.86 cm) |
| Artikelgewicht | 3 Pfund (1.36 kg) |
| Linse | 200 mm Optical Glass Lens |
| Lichtquelle | Hochleistungs-LED |
| LED-Helligkeit | 5,000 Lux |
| LED-Lebensdauer | Bis zu 10,000 Stunden |
| Kopiergröße | 5" x 5" (12.7 cm x 12.7 cm) |
| Projektionsbereich | 2X to 14X Enlargement |
| Im Lieferumfang enthaltene Komponenten | Projector unit, 6.5-foot power cord, 12V 1.5 AMP Netzteil |
| Montagetyp | Tischmontage |
Figure 5: Artograph LED Tracer specifications overview.
Figure 6: Artograph LED Tracer dimensions.
9. Garantie und Support
For information regarding warranty coverage, product support, or service, please refer to the official Artograph website or contact Artograph customer service directly. Contact details can typically be found on the manufacturer's packaging or webWebsite.
