Philips Jump Starter Instruction Manual

1. Einleitung

Thank you for choosing the Philips Jump Starter DLP8086N. This device is a portable, high-capacity power bank designed to jump-start 12V vehicles and charge various electronic devices. It features an 800A peak current and a 12000mAh battery, making it suitable for gasoline engines up to 6.0L and diesel engines up to 3.0L. Please read this manual carefully before use to ensure safe and optimal performance.

2. Produktkomponenten

Das Paket enthält die folgenden Artikel:

• Philips Jump Starter Unit (DLP8086N)
• Smart Jump Starter Cables with clamps
• Micro-USB-Ladekabel
• Instruction Manual (with Warranty Card)

Image: Philips Jump Starter DLP8086N with its various ports and buttons labeled, including the power button, Micro USB input, USB output ports, LED light, and jump start port.

3. Spezifikationen

4. Sicherheitsinformationen und Schutzmaßnahmen

The Philips Jump Starter is equipped with multiple safety features to prevent accidents and ensure user safety. These include:

• Kurzschlussschutz
• Überladeschutz
• Überentladungsschutz
• Verpolungsschutz
• Reverse-Charge-Schutz
• Überstromschutz
• Überhitzungsschutz
• Verpolschutz

Der smarte Klamps feature DSLI technology and communicate with the Battery Management System (BMS) to prevent potential errors that could damage the device or vehicle. Always follow the instructions carefully.

Image: Philips Jump Starter unit shown with its smart clamps, illustrating the various safety protection icons such as short circuit, overcharge, over-discharge, reverse connection, reverse charge, overcurrent, overheat, and reverse polarity protection.

5. Einrichtung und Aufladen des Geräts

5.1 Aufladen des Starthilfekabels

Before first use, fully charge the jump starter. Connect the provided Micro USB charging cable to the Micro USB input port on the jump starter and to a USB power adapter (not included). The LED indicators will show the charging status. A full charge typically takes less than 5 hours.

5.2 Batteriestand prüfen

Press the power button once to check the battery level. The blue LED indicators will light up, showing the remaining charge.

6. Bedienungsanleitung

6.1 Starthilfe für Ihr Fahrzeug

Befolgen Sie diese Schritte, um Ihr Fahrzeug sicher zu überbrücken:

1. Stellen Sie sicher, dass das Starthilfegerät ausreichend geladen ist.
2. Insert the blue end of the smart jump starter cable into the jump start port on the unit. Ensure a firm connection.
3. Verbinden Sie die roteamp an den Pluspol (+) der Fahrzeugbatterie.
4. Verbinden Sie die schwarzeamp an den Minuspol (-) der Fahrzeugbatterie.
5. Once connected, the indicator on the smart cable should show a solid green light, indicating a safe connection. If it shows a red light or flashes, check the connections.
6. Starten Sie den Motor Ihres Fahrzeugs.
7. Once the engine starts, immediately remove the smart jump starter cable from the vehicle battery terminals, then disconnect it from the jump starter unit.

Image: A four-panel illustration demonstrating the jump-starting process: 1. Inserting the jump starter cable into the unit. 2. Connecting the red clamp an den Pluspol der Batterie und die schwarze Klemme anschließenamp to the negative terminal. 3. Starting the car engine. 4. Removing the jump starter cable from the battery.

6.2 Laden elektronischer Geräte

The jump starter features two QC3.0 USB output ports for charging smartphones, tablets, and other electronic devices. Connect your device's USB charging cable to one of the USB output ports on the jump starter. The unit will automatically begin charging your device.

Image: The Philips Jump Starter unit connected via USB cables to a smartphone and a tablet, demonstrating its capability to charge electronic devices.

6.3 Verwenden des LED-Lichts

Die eingebaute LED-Leuchte bietet drei Modi für verschiedene Situationen:

• Spotlight-Modus: Zur allgemeinen Beleuchtung in dunklen Umgebungen.
• SOS-Modus: Sendet in Notfällen ein SOS-Signal aus.
• Stroboskop-Modus: Blinklicht zum Signalisieren oder um Aufmerksamkeit zu erregen.

To cycle through the modes, press the LED light button repeatedly.

Image: A hand holding the Philips Jump Starter, with its LED light illuminating a dark engine bay. Icons below illustrate the three light modes: SOS, Strobe, and Spotlight.

7. Wartung

To ensure the longevity and optimal performance of your Philips Jump Starter:

• Lagern Sie das Gerät an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen.
• Um die Batterieleistung zu erhalten, laden Sie das Gerät alle 3 bis 6 Monate auf, auch wenn es nicht benutzt wird.
• Reinigen Sie das Äußere mit einem weichen, damp Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Keep the jump start ports and USB ports free from dust and debris.

8. Fehlerbehebung

If you encounter issues with your Philips Jump Starter, refer to the following common solutions:

• Gerät lässt sich nicht einschalten: Stellen Sie sicher, dass das Gerät aufgeladen ist. Halten Sie den Ein-/Ausschalter einige Sekunden lang gedrückt.
• Fahrzeug startet nicht: Überprüfen Sie, ob der Smart-Clamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the smart cable indicator shows a solid green light. The vehicle battery might be severely discharged; try waiting a few minutes after connecting before attempting to start.
• Unit does not charge: Verify that the Micro USB charging cable is properly connected to both the jump starter and the power adapter. Try using a different USB power adapter or cable.
• Electronic devices do not charge: Ensure the jump starter has sufficient charge. Check the USB cable connection to both the jump starter and the device.

9. Garantie und Support

This Philips Jump Starter DLP8086N comes with a 1 Jahr HerstellergarantieBitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

For any questions, concerns, or technical support regarding your product, please contact Philips customer service. Refer to the warranty card included in your package for specific contact information.

Image: A smiling customer support representative wearing a headset, symbolizing available product support.