Philips HR1700 Blender Jug Replacement Part User Manual

1. Einleitung

This document provides essential instructions for the safe and effective use of your new Philips HR1700 compatible blender jug replacement part. This jug (model JC_PH_SM) is designed to function with Philips HR1700 series blenders. Please read this manual thoroughly before first use and retain it for future reference.

2. Wichtige Sicherheitshinweise

Always observe basic safety precautions when using electrical appliances, including your blender. This replacement jug is intended for use with the Philips HR1700 blender only. Failure to follow these instructions may result in damage or injury.

• Ensure the blender is unplugged from the power outlet before assembling, disassembling, or cleaning the jug.
• Do not operate the blender with a damaged jug or lid.
• Keep hands and utensils out of the jug while the blender is operating to prevent injury.
• Do not fill the jug beyond the maximum fill line to avoid spillage.
• This jug is not intended for use with hot liquids that may cause pressure buildup.
• Vor dem Betrieb des Mixers muss stets sichergestellt sein, dass der Deckel fest verschlossen ist.

3. Packungsinhalt

Prüfen Sie beim Auspacken, ob alle Komponenten vorhanden sind:

• 1 x Blender Jug (JC_PH_SM)
• 1 x Jug Lid

4. Aufbau und Montage

Follow these steps to properly set up your new blender jug:

1. Auspacken: Carefully remove the blender jug and lid from its packaging.
2. Erstreinigung: Before first use, wash the jug and lid with warm, soapy water. Rinse thoroughly and dry.
3. Prepare Blender: Ensure your Philips HR1700 blender base is unplugged and placed on a stable, flat surface.
4. Krug anbringen: Align the base of the jug with the blender motor unit. Twist or push down firmly until it locks securely into place. Refer to your original Philips HR1700 blender manual for specific attachment instructions if needed.
5. Sicherer Deckel: Place the lid onto the jug and ensure it is properly seated and sealed.

5. Bedienungsanleitung

This replacement jug functions identically to the original jug for your Philips HR1700 blender. Always refer to your main Philips HR1700 blender instruction manual for detailed operating procedures, speed settings, and blending tips.

1. Zutaten hinzufügen: Geben Sie die gewünschten Zutaten in den Krug. Die maximale Füllmenge, die auf dem Krug angegeben ist, darf nicht überschritten werden.
2. Sicherer Deckel: Firmly place the lid onto the jug. Ensure any pouring spout or filler cap is also closed.
3. Auf die Basis legen: Ensure the jug is correctly seated and locked onto the blender motor unit.
4. Einstecken: Stecken Sie den Mixer in eine Steckdose.
5. Operate Blender: Select the desired speed or program on your Philips HR1700 blender base.
6. Gießen: Once blending is complete, switch off and unplug the blender. Carefully remove the lid and pour out the contents.

6. Reinigung und Wartung

Regular cleaning ensures hygiene and prolongs the life of your blender jug.

• Den Mixer immer vom Stromnetz trennen. vor der Reinigung.
• Zerlegen: Remove the jug from the blender base and separate the lid.
• Waschen: Wash the jug and lid immediately after use to prevent food residue from drying. Hand washing with warm, soapy water is recommended. Use a soft brush for hard-to-reach areas.
• Abspritzen: Spülen Sie alle Teile gründlich unter fließendem Wasser ab.
• Trocken: Alle Teile müssen vor dem Zusammenbau oder der Lagerung vollständig an der Luft trocknen.
• Lagerung: Store the clean, dry jug and lid in a safe place.

7. Fehlerbehebung

If you encounter issues with your replacement blender jug, consider the following:

• Jug does not fit on blender base: Ensure you have the correct model (Philips HR1700). Check for any obstructions on the blender base or the jug's bottom.
• Lid does not seal properly: Ensure the lid is correctly aligned and pressed down firmly. Check for any food particles or damage preventing a proper seal.
• Leaks from the jug: If the jug itself is leaking (not from the lid), inspect for cracks or damage. If damaged, discontinue use and replace.

For issues related to the blender's motor or operation, refer to your original Philips HR1700 blender manual.

8. Spezifikationen

9. Garantie und Support

This product is a non-original replacement part. For any questions regarding this specific replacement jug, including warranty information or support, please contact the seller directly through your purchase platform. Philips' official warranty may not cover the use of non-original parts.