TM919B 30A Programmable Electronic Timer Switch User Manual

1. Einleitung

The SINOTIMER TM919B is a 30A 7-day programmable electronic timer switch designed for automatic control of various electrical equipment. It allows you to set specific ON/OFF times over a 24-hour or 7-day cycle, providing convenience and energy efficiency for applications such as streetlights, lamps, water heaters, air conditioners, and more.

Hauptmerkmale:

• Ideal for household use in DB Boards.
• Hohe Kapazität: 5000 Watt / 30 Amps.
• Flexible programming: 24 Hours / 7 Days a Week Programmable.
• Automatische Zeitfehlerkorrektur: +/- 30 Sekunden pro Woche.
• Multiple programs: Repeat programs with 16 ON/OFF settings.
• Manuelle Ein-/Ausschaltung.

2. Produktüberschreitungview

Abbildung 1: Vorderseite view of the TM919B timer switch, displaying the LCD screen with time and day, and the array of control buttons including P, D+, H+, M+, RESET, and MANUAL.

Abbildung 2: Schräg view of the TM919B timer switch, showing its side profile and the clear protective cover over the buttons.

Abbildung 3: Seite view of the TM919B timer switch, detailing the wiring terminals (L, N, 1, 2, 3, 4, 5) and product specifications like voltage und Stromstärken.

3. Spezifikationen

4. Installation und Verkabelung

The TM919B timer switch is designed for DIN rail mounting, making it suitable for integration into electrical distribution boards. Ensure all power is disconnected before attempting installation.

Schaltplan:

Figure 4: Wiring diagram for the TM919B. Terminals 1 and 2 are for power input (L and N). Terminals 3, 4, and 5 are for the output, typically used for NO (Normally Open) and NC (Normally Closed) connections to control the load.

1. Leistungsaufnahme: Connect the live (L) and neutral (N) wires to terminals 1 and 2 respectively. Ensure the voltage matches the timer's specification (110V for this model).
2. Lastanschluss: The timer has a single changeover switch.
   • Klemme 3: Normalerweise geschlossener Kontakt (NC).
   • Terminal 4: Common (COM) contact.
   • Klemme 5: Normalerweise offener (NO) Kontakt.
3. Connect your load (e.g., lamp, motor) between the common terminal (4) and either the NO (5) or NC (3) terminal, depending on whether you want the load to be ON or OFF when the timer is in its default state.
4. Securely fasten all wires to prevent loose connections.
5. Once wiring is complete, restore power and proceed with programming.

5. Operating Instructions and Programming

The TM919B timer allows for up to 16 ON/OFF programs. Follow these steps to set the current time and program the timer.

Tastenfunktionen:

• P (Programm): Wechselt in den Programmiermodus.
• D+ (Tag): Passt den Wochentag an.
• H+ (Stunde): Stellt die Stunde ein.
• M+ (Minute): Passt die Minute an.
• ZURÜCKSETZEN: Resets all settings to factory defaults. Use a pointed object to press.
• HANDBUCH: Schaltet zwischen den Modi EIN, AUTO und AUS um.

Einstellen der aktuellen Uhrzeit:

1. Drücken Sie die D+ , um den aktuellen Wochentag einzustellen.
2. Drücken Sie die H+ , um die aktuelle Stunde einzustellen.
3. Drücken Sie die M+ , um die aktuelle Minute einzustellen.
4. Die Uhrzeit wird nach einigen Sekunden Inaktivität automatisch gespeichert.

Programming ON/OFF Times (Up to 16 Programs):

1. Drücken Sie die P Einmaliges Drücken der Taste. Im Display erscheint „1 EIN“. Dies dient zum Einstellen der ersten Einschaltzeit.
2. Drücken H+ Und M+ to set the desired hour and minute for the first ON event.
3. Drücken D+ to select the days of the week for this program. Options include: every day, specific days (e.g., MO-FR, MO-SA, SA-SU), or individual days. If you want the same setting every day, you do not need to press D+.
4. Drücken Sie die P button again. The display will show "1 OFF". This is for setting the first OFF time.
5. Drücken H+ Und M+ to set the desired hour and minute for the first OFF event.
6. Drücken D+ again if you need to specify different days for the OFF event, or leave it if it matches the ON event's days.
7. Repeat steps 1-6 for programs 2 through 16 (e.g., "2 ON", "2 OFF", etc.).
8. Nachdem Sie alle gewünschten Programme eingestellt haben, drücken Sie die Taste HANDBUCH button repeatedly until "AUTO" is displayed. This ensures the timer operates according to your programmed schedule.

Manuelle Kontrolle:

Drücken Sie die HANDBUCH Taste zum Durchschalten der Betriebsmodi:

• AUF: The output is continuously ON, overriding programmed settings.
• AUS: The output is continuously OFF, overriding programmed settings.
• WAGEN: The timer operates according to the programmed ON/OFF schedules. Ensure the timer is in AUTO mode for automatic operation.

6. Wartung

The TM919B timer switch requires minimal maintenance. Keep the device clean and free from dust. Do not expose it to excessive moisture or extreme temperatures. If the display becomes dim or unresponsive, check the power supply. The internal battery provides backup for settings during power outages für bis zu 60 Tage.

7. Fehlerbehebung

8. Garantie und Support

This SINOTIMER product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official SINOTIMER store: SINOTIMER Store auf Amazon