TELESIN 2nd Generation 2.7M Ultra Long Carbon Fiber Selfie Stick

Einführung

Thank you for choosing the TELESIN 2nd Generation 2.7M Ultra Long Carbon Fiber Selfie Stick. This manual provides essential information for the safe and effective use of your new selfie stick. Please read it thoroughly before use and retain it for future reference.

Produkt überview

The TELESIN 2.7M Ultra Long Carbon Fiber Selfie Stick is designed for action camera users seeking extended reach and stability. Constructed from high-quality carbon fiber, it offers a lightweight yet robust solution for capturing wide-angle shots and unique perspectives. Its adjustable length and versatile mounting options make it suitable for various shooting scenarios.

Image: The TELESIN 2.7M Ultra Long Carbon Fiber Selfie Stick shown fully extended with an action camera attached.

Image: The selfie stick in a partially extended configuration, demonstrating its adjustable nature.

Hauptmerkmale:

• Ultra-Long Reach: Extends up to 2.7 meters (270cm) for expansive shots.
• Einstellbare Längen: Features 6 distinct adjustable lengths (40cm, 95cm, 125cm, 180cm, 205cm, 270cm).
• Leicht und langlebig: Constructed from carbon fiber for stability and reduced weight (approx. 300g).
• Vielseitige Montage: Includes a detachable adapter with a 1/4" standard camera screw connector and a GoPro-style mount.
• Breite Kompatibilität: Compatible with GoPro series, Insta360 One R/X/X2, DJI Action 2, Osmo Action, Osmo Pocket/2, and most action cameras with a GoPro connection interface.
• 180-Grad-Drehung: Allows for flexible angle adjustments to capture desired perspectives.

Aufstellen

Anbringen Ihrer Kamera:

1. Identify the appropriate mount for your camera. The selfie stick comes with a standard GoPro-style mount and a 1/4" screw adapter.
2. If using a GoPro or similar action camera, align its mounting tabs with the GoPro-style mount on the selfie stick. Insert the thumb screw and tighten it securely.
3. If using a camera with a 1/4" tripod thread, twist down the detachable adapter to reveal the 1/4" screw connector. Screw your camera onto this connector until it is firmly attached.

Bild: Detailliert view of attaching an action camera to the selfie stick's GoPro-compatible mount.

Image: A close-up showing an action camera properly mounted and secured to the selfie stick.

Image: The detachable adapter, illustrating the 1/4" standard camera screw connector for wider camera compatibility.

Bedienungsanleitung

Länge anpassen:

1. To extend the selfie stick, hold the base section firmly and gently pull out the desired sections. The stick is designed to extend to 6 different lengths: 40cm, 95cm, 125cm, 180cm, 205cm, and 270cm.
2. To lock a section in place, twist the section clockwise until it feels secure. To unlock and retract, twist counter-clockwise.
3. Ensure all extended sections are securely locked before use to prevent accidental retraction or instability.

Image: A visual guide demonstrating the six adjustable lengths and the twist-to-lock/unlock mechanism of the selfie stick.

Winkeleinstellung:

The camera mount allows for 180-degree rotation, enabling you to adjust the camera angle for various shots. Loosen the thumb screw slightly, adjust the angle, and then re-tighten the screw to secure the position.

Stativkompatibilität:

The bottom of the selfie stick features 1/4" screw holes, allowing it to be mounted on any standard 1/4" tripod for added stability (tripod sold separately).

Wartung

• Reinigung: Wischen Sie den Selfie-Stick mit einem weichen, trockenen Tuch ab. Bei hartnäckigem Schmutz kann ein leicht trocknendes Tuch helfen.amp Ein Tuch kann verwendet werden, anschließend sollte die Oberfläche sofort getrocknet werden. Vermeiden Sie aggressive Chemikalien oder Scheuermittel.
• Lagerung: Bewahren Sie den Selfie-Stick an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
• Inspektion: Regularly inspect all parts for any signs of wear, damage, or loose connections. Do not use the product if any part is damaged.
• Sicherheitsvorkehrungen: When extending or retracting the stick, be mindful of the gaps between sections to avoid pinching your fingers. Follow the natural movement of the stick.

Fehlerbehebung

Instabilität oder Wackeln:

• Ensure all extended sections are fully twisted and locked clockwise.
• Verify that your camera is securely attached to the mount and the thumb screw is tightened.
• Avoid over-extending the stick beyond its recommended lengths, especially with heavier cameras.

Camera Detaching:

• Always double-check that the camera's mounting screw or thumb screw is tightened firmly before use.
• Ensure the camera is compatible with the mount type being used (GoPro-style or 1/4" screw).

Technische Daten

Bild: Eine Nahaufnahme view Hervorzuheben ist die Kohlefaserkonstruktion, die sich durch ihr geringes Gewicht und ihre hohe Festigkeit auszeichnet.

Garantie und Support

For warranty information or technical support, please refer to the product packaging or contact TELESIN customer service directly. Keep your purchase receipt as proof of purchase.