Einführung
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp mit Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Sicherheitshinweise
Beachten Sie bei der Installation und Verwendung elektrischer Produkte stets die grundlegenden Sicherheitsvorkehrungen, um das Risiko von Bränden, Stromschlägen und Verletzungen zu verringern.
- Ausschalten: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Nur zur Verwendung im Innenbereich: Dieses lamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Korrekte Basis: Stellen Sie sicher, dass die lamp holder is compatible with an E27 base.
- Bandtage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampAnforderungen.
- Nicht dimmbar: Dieses lamp is not dimmable. Do not use it with dimmer switches.
- Augenkomfort: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Packungsinhalt
Das Paket enthält:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Installationsanleitung
- Strom ausschalten: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Altes L entfernenamp: Carefully unscrew and remove the existing lamp from the E27 lamp Halter.
- Installieren Sie neues Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp Den Halter handfest anziehen. Nicht zu fest anziehen.
- Positionierung: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Strom wiederherstellen: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Bedienungsanleitung
Dieses Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Automatisches Ein-/Ausschalten: Die lamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Tageslicht-Sensor: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Bewegungssensor: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Lichtqualität: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Wartung
The Philips LED Lamp with Sensor requires minimal maintenance.
- Reinigung: Vor der Reinigung sicherstellen, dass das Gerät ausgeschaltet ist. Wischen Sie die Oberfläche ab.amp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Sensorbereich: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Lamp geht nicht an. |
|
|
| Lamp lässt sich nicht ausschalten. |
|
|
| Sensor sensitivity seems low. |
|
|
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | Philips |
| Modellnummer | 929002058731 |
| Lichtart | LED |
| Wastage | 8 Watt |
| Glühlampenäquivalent | 60 Watt |
| Lamp Base | E27 |
| Lichtfarbe | Warmweiß |
| Farbtemperatur | 2700 Kelvin |
| Lichtstrom | 806 Lumen |
| Bandtage | 100-240 Volt |
| Frequenz | 50 Hertz |
| Besondere Merkmale | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Innen-/Außenbereich | Innenbereich |
| Lebensdauer | 15,000 Stunden |
| Abmessungen (H x B) | 12.2 cm x 6.25 cm |
| Material | Plastik |
Garantie und Support
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Online-Hilfe: Besuchen www.philips.com/support für häufig gestellte Fragen und Kontaktmöglichkeiten.