YA-MAN RF Gesichtsbehandlungsgerät Bright Lift White HRF40S Benutzerhandbuch

1. Produktüberschreitungview

The YA-MAN RF Facial Device Bright Lift White HRF40S is designed to enhance skin clarity and address common skin concerns. This device integrates Radio Frequency (RF), Electrical Muscle Stimulation (EMS), and LED light therapy to provide comprehensive skincare.

It operates through a three-step process: Polieren, Wieder auffüllen, Und Siegel, targeting various aspects of skin health.

Image: YA-MAN RF Facial Device Bright Lift White HRF40S. This image shows the device from the front, highlighting its sleek design and the blue LED light on the treatment head.

Hauptmerkmale:

• HF-Technologie (Hochfrequenz): Warms the skin to support effective skincare.
• Ion Cleansing & Introduction: Utilizes ion power to remove impurities and enhance the penetration of skincare ingredients.
• EMS (Elektrische Muskelstimulation): Stimulates facial muscles for a toning effect.
• Blaues LED-Licht: Supports skin tightening and overall skin health.
• Melano Barrier Pulse: A new waveform in MOIST mode, designed to work with whitening cosmetics.
• Cool-down Function: Helps to soothe and tighten the skin after treatment.

2. Sicherheitsvorkehrungen

Bitte lesen Sie vor der Benutzung des Geräts alle Sicherheitshinweise sorgfältig durch, um Verletzungen oder Schäden zu vermeiden.

Do Not Use If You Are:

• Using medical electrical equipment (e.g., implantable pacemakers, life support systems like artificial heart-lung machines, or wearable electrocardiographs).
• Suffering from heart disease, disability, or have a suspected condition.
• Unable to express your intentions or sensations (e.g., temperature or stimulation).
• Diagnosed with autoimmune diseases.

Consult a Doctor Before Use If You Are:

• Suffering from acute diseases or infectious diseases.
• Diagnosed with malignant tumors or febrile diseases.
• Experiencing high blood pressure or blood disorders.
• Having a fever.
• Experiencing sensory impairment due to severe peripheral circulatory dysfunction (e.g., diabetes).
• Diagnosed with neurological disorders.
• Suffering from skin diseases or atopic dermatitis.
• Currently undergoing medical treatment or taking medication.
• Prone to allergies, contact dermatitis, or have pre-existing skin conditions, or concerns about skin reactions during use.

Do Not Use On The Following Areas:

• Fractured areas.
• Areas where metal has been implanted in the body due to surgical procedures (e.g., plastic surgery, orthopedic surgery, cosmetic surgery).
• Areas with internal bleeding, swelling, or scabs after cosmetic medical procedures.

Notiz: For areas that have undergone cosmetic medical procedures (e.g., hyaluronic acid injection, silicone injection, Botox, thread lift, double eyelid surgery, HIFU), refrain from using the device for 2 weeks after the procedure. Consult your doctor, and if there are no issues, you may then use the device.

If you feel unwell or notice any skin abnormalities during use, immediately stop using the device. If the condition does not improve, consult a doctor.

3. Einrichtung

Auspacken und erste Aufladung:

1. Nehmen Sie das Gerät und sämtliches Zubehör vorsichtig aus der Verpackung.
2. Stellen Sie das Gerät auf die Ladestation.
3. Connect the USB charging cable to the charging stand and then to the AC adapter.
4. Stecken Sie das Netzteil in eine Steckdose.
5. Charge the device for approximately 3 hours before first use. The indicator lights will show charging status.

Image: The YA-MAN RF Facial Device Bright Lift White HRF40S on its charging stand, ready for charging.

Attaching the Cotton Stopper (for CLEAN mode):

For the CLEAN mode, it is recommended to use a cotton pad. Attach the cotton stopper to secure a cotton pad onto the treatment head.

4. Bedienungsanleitung

The device features three main modes: CLEAN (Polish), MOIST (Replenish), and COOL (Seal).

Allgemeine Anwendungsschritte:

1. Ensure your face is clean and free of makeup.
2. Apply appropriate skincare products as instructed for each mode.
3. Select the desired mode and intensity level.
4. Gently glide the device over your skin as directed.
5. After use, clean the device as per maintenance instructions.

Image: The three-step skincare process: Polish, Replenish, and Seal, illustrated with the device.

Details zum Modus:

Step 1: CLEAN (Polish)

This mode uses ion power to remove impurities and old keratin from pores after washing your face, enhancing skin clarity and preparing it for subsequent skincare.

• Attach a cotton pad with the cotton stopper.
• Apply a suitable toner or cleansing lotion to the cotton pad.
• Select CLEAN mode and desired intensity.
• Gently glide the device over your face.

Image: Illustration of Ion Cleansing and Ion Introduction. The left panel shows positive ions attracting dirt, while the right panel shows negative ions aiding ingredient penetration.

Step 2: MOIST (Replenish)

This mode utilizes RF and the new Melano Barrier Pulse to help skincare ingredients penetrate the skin, promoting a brighter complexion. It is recommended for use with whitening cosmetics containing ingredients like Vitamin C derivatives or tranexamic acid.

• Apply your preferred serum or moisturizing cream to your face.
• Select MOIST mode and desired intensity.
• Gently glide the device over your face, allowing the RF warmth and pulse to work.

Image: Diagram illustrating RF (Radio Frequency) technology. It shows RF waves penetrating the skin layers, generating warmth.

Image: Explanation of EMS (Electrical Muscle Stimulation). A facial diagram indicates various muscle groups, demonstrating how the device targets them.

Step 3: COOL (Seal)

The final step uses a cool-down function and blue LED light to help tighten and soothe the skin.

• After completing the MOIST mode, select COOL mode.
• Gently glide the cool head over your face.
• When using around the eyes, close your eyes and keep the electrode head at least 5cm away from the skin.

Image: Blue LED light function and usage around the eyes. The image shows the device emitting blue light and a diagram indicating a minimum 5cm distance from the eye area during use.

5. Wartung

Reinigung des Geräts:

1. After each use, ensure the device is turned off and disconnected from the power source.
2. Wipe the electrode head and body of the device with a soft, damp Tuch.
3. Do not use abrasive cleaners, alcohol, or harsh chemicals, as these may damage the device.
4. Stellen Sie sicher, dass das Gerät vor der Lagerung oder dem Wiederaufladen vollständig trocken ist.

Lagerung:

Lagern Sie das Gerät an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen. Bewahren Sie es außerhalb der Reichweite von Kindern auf.

6. Fehlerbehebung

7. Spezifikationen

8. Garantie und Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official YA-MAN webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Manufacturer Reference: 002-0011_22220