1. Einleitung
Thank you for choosing the Waterdrop K19-H Countertop Reverse Osmosis System. This innovative water dispenser provides purified and instant hot water, designed for convenience and superior filtration. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new system. Please read it thoroughly before use.

Figure 1.1: Waterdrop K19-H Countertop Reverse Osmosis System, showing its sleek design and water dispensing spout.
2. Sicherheitshinweise
Beachten Sie stets die folgenden Sicherheitsvorkehrungen, um Verletzungen oder Schäden am Produkt zu vermeiden:
- Ensure the system is plugged into a grounded electrical outlet with the correct voltage (2700 Watt).
- Tauchen Sie das Gerät nicht in Wasser oder andere Flüssigkeiten.
- Keep out of reach of children. The hot water function includes a child lock for safety.
- Do not operate the system if the power cord or plug is damaged.
- Vermeiden Sie es, das Gerät in der Nähe von Wärmequellen oder in direktem Sonnenlicht aufzustellen.
- Only use the system with potable water.
- Ensure the water tank is properly installed before operation to prevent leaks.
- Blockieren Sie nicht die Belüftungsöffnungen.

Figure 2.1: The Waterdrop K19-H system is SGS-tested for safety and purity, ensuring safe drinking water, especially for infants.
3. Produktkomponenten
The Waterdrop K19-H system consists of the following main components:
- Haupteinheit: Houses the filtration system, heating element, and control panel.
- Wassertank: 170 oz (approx. 5L) capacity for feed water, with separate compartments for pure and drain water.
- Zusammengesetzter Filter: A 3-in-1 filter cartridge for 6-stage deep filtration.
- Ausgießer: Where purified water is dispensed.
- Tropfschale: Collects any spills.
- Smart Screen & Control Panel: Displays system status, temperature, volume, and allows for setting adjustments.

Figure 3.1: The K19-H system serves multiple functions, replacing traditional water purification and dispensing devices.
4. Einrichtung
The Waterdrop K19-H is designed for plug-and-play convenience with no installation or drilling required.
- Auspacken: Entnehmen Sie vorsichtig alle Komponenten aus der Verpackung.
- Platzierung: Place the unit on a stable, flat surface in your desired location (kitchen, bedroom, office, RV). Ensure adequate space around the unit for ventilation.
- Installation des Wassertanks: Ensure the water tank is properly seated in its designated slot.
- Filterinstallation: Insert the composite filter cartridge into its housing as per the markings. Ensure it is securely locked in place.
- Erstes Spülen: Before first use, fill the water tank with tap water to the maximum mark. Dispense and discard at least two full tanks of water to flush the system and new filter. This ensures optimal water quality.
- Stromanschluss: Plug the power cord into a grounded electrical outlet. The system needs to be powered on for use.

Figure 4.1: The compact design of the K19-H makes it suitable for use in various environments, from kitchens to RVs.
5. Bedienung
The K19-H system features an easy-to-use operating panel and a smart screen.
5.1 Füllen des Wassertanks
Lift the water tank from the unit and fill it with tap water. Ensure to fill to the maximum mark to optimize water utilization. Reinsert the tank securely.
5.2 Smart Screen Display
The smart screen displays real-time information:
- Temperatur: Current dispensing temperature.
- Wasservolumen: Selected dispensing volume.
- Water Filtration Status: Indicates active filtration.
- Flushing States: Shows when the system is self-flushing.
- Water Quality (TDS): Displays the Total Dissolved Solids level.
- Filterlebensdauer: Indicates remaining filter life.
- Plateau-Modus: An advanced setting for specific water needs.

Figure 5.1: The intelligent display provides real-time updates on system status and water quality.
5.3 Wasserausgabe
The system offers 4 temperature options and 4-mode water capacity options.
- Temperatur auswählen: Use the temperature control buttons to choose your desired water temperature. The V-type heating technology provides instant hot water in 3 seconds. Note that flow rate may be reduced in heating mode.
- Lautstärke auswählen: Use the volume control buttons to select the desired water volume (e.g., 8oz, 12oz, 16oz, 20oz).
- Dosieren: Place your cup or container under the spout and press the dispense button.

Figure 5.2: Choose from various water capacity options to suit your needs.
5.4 Kindersicherung
The system is equipped with a child lock feature to prevent accidental hot water dispensing. Refer to the on-screen prompts or specific buttons for activation and deactivation.
6. Wartung
Regular maintenance ensures optimal performance and longevity of your Waterdrop K19-H system.
6.1 Filterwechsel
The composite filter typically needs replacement once a year. The smart screen will indicate when a filter change is due.
- Ziehen Sie den Stecker aus der Steckdose.
- Entfernen Sie den Wassertank.
- Locate the filter cartridge and twist or unlock it according to the instructions on the filter housing.
- Nehmen Sie den alten Filter heraus und entsorgen Sie ihn fachgerecht.
- Insert the new filter cartridge, ensuring it is securely seated and locked.
- Replace the water tank and plug in the unit.
- Perform an initial rinse cycle as described in the Setup section to flush the new filter.

Figure 6.1: The long-lasting filter reduces the need for frequent replacements and saves on bottled water costs.
6.2 Reinigung des Geräts
- Wischen Sie die Außenseite des Geräts mit einem weichen,amp Tuch. Keine Scheuermittel verwenden.
- Regularly empty and clean the drip tray.
- Clean the water tank periodically with mild soap and water, then rinse thoroughly.
7. Fehlerbehebung
If you encounter issues with your Waterdrop K19-H system, refer to the table below for common problems and solutions.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Es wird kein Wasser ausgegeben | No power; Water tank empty; Tank not properly installed; Filter not installed correctly. | Check power connection; Refill water tank; Reinstall tank securely; Reinstall filter. |
| Slow water flow (especially hot water) | Normal for heating mode; Clogged filter. | This is normal for hot water dispensing; Check filter lifespan and replace if necessary. |
| Water tastes bad or has white particles | Initial use (needs flushing); Filter not working effectively; System defect. | Perform initial rinse cycles; Check filter installation and lifespan; Contact customer service if problem persists. |
| Undicht | Water tank not properly seated; Loose connections. | Ensure water tank is fully inserted; Check all connections for tightness. |
| Smart screen not responding | Power issue; Temporary glitch. | Unplug and replug the unit; Contact customer service if issue persists. |
If the problem persists after attempting these solutions, please contact Waterdrop Customer Service for assistance.
8. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellname | K19-H |
| Installationstyp | Arbeitsplatte (Keine Installation erforderlich) |
| Produktabmessungen (L x B x H) | 15.5" x 9.2" x 17.5" |
| Artikelgewicht | 16 Pfund |
| Wastage | 2700 Watt |
| Fassungsvermögen des Wassertanks | 170 oz (ca. 5 l) |
| Verhältnis von Reinraum zu Abwasser | 3:1 |
| Filterung Stages | 6 Sekundentage deep filtration (3-in-1 composite filter) |
| Maximal zulässiger TDS-Wert des Wassers | 500 PPM |
| Besondere Merkmale | SGS & CSA Tested, PFAS Reduction, BPA Free, Instant Hot Water, 4 Temperature Options, 4 Water Capacity Options, Smart Screen, Child Lock |
| UPC | 840814178805 |

Figure 8.1: The advanced 6-stage filtration system ensures comprehensive water purification.
9. Garantie und Support
Waterdrop products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the official warranty card included with your product or visit the official Waterdrop webWebsite.
Kundenservice
If you have any questions, require technical assistance, or need to report an issue, please contact Waterdrop Customer Service. Contact information can typically be found on the product packaging, the official Waterdrop webSeite? ˅ (Visit the Waterdrop Store on Amazon), or within the official user manual PDF.
Weitere Informationen finden Sie unter: Benutzerhandbuch (PDF) online verfügbar.