Alphacool M02-110mm

Alphacool HDX M.2 SSD Cooler M02-110mm Instruction Manual

Model: M02-110mm | Part Number: 11747

1. Einleitung

The Alphacool HDX M.2 SSD Cooler M02-110mm is designed to provide passive cooling for M.2 Solid State Drives. This cooler helps to dissipate heat generated by the SSD, which can contribute to maintaining optimal performance and longevity of the drive. Its compact design ensures compatibility with various system configurations.

2. Sicherheitshinweise

  • Always handle electronic components with care to avoid damage.
  • Stellen Sie sicher, dass Ihr System vor der Installation ausgeschaltet und vom Stromnetz getrennt ist.
  • Discharge any static electricity from your body before handling the SSD or cooler components.
  • Keep small parts, such as clips, away from children.
  • Wenn Sie sich bei einzelnen Installationsschritten unsicher sind, wenden Sie sich an einen qualifizierten Techniker.

3. Packungsinhalt

Bitte überprüfen Sie, ob alle unten aufgeführten Komponenten in Ihrem Paket enthalten sind:

  • Two (2) Cooling Plates (Aluminium, Black)
  • Thermal Pads (various sizes for chips)
  • Befestigungsclips
Alphacool HDX M.2 SSD Cooler components including two black cooling plates, thermal pads, and mounting clips.

Image 3.1: Contents of the Alphacool HDX M.2 SSD Cooler package.

4. Einrichtung und Installation

Follow these steps to properly install the Alphacool HDX M.2 SSD Cooler onto your M.2 SSD:

  1. Bereiten Sie die SSD vor: Gently remove your M.2 SSD from its slot or packaging. Ensure the SSD surface is clean and free of dust or debris.
  2. Wärmeleitpads anbringen: Carefully peel the protective film from both sides of the thermal pads. Place the thermal pads directly onto the memory chips and controller chip of your M.2 SSD. Ensure good contact and coverage over the heat-generating components.
  3. Position Cooling Plates: Place one cooling plate on top of the thermal pads on the upper side of the SSD. Place the second cooling plate on the underside of the SSD, aligning it with the top plate.
  4. Mit Clips sichern: Use the provided mounting clips to secure the two cooling plates together, sandwiching the M.2 SSD and thermal pads firmly in place. Ensure the clips are securely fastened but do not apply excessive force.
  5. SSD einbauen: Carefully re-insert the M.2 SSD with the installed cooler into its designated M.2 slot on your motherboard. Secure the SSD with the motherboard's retaining screw, if applicable.
Alphacool HDX M.2 SSD Cooler installed on an M.2 SSD, showing the black cooling plates.

Image 4.1: Alphacool HDX M.2 SSD Cooler fully assembled on an M.2 SSD.

5. Betrieb

The Alphacool HDX M.2 SSD Cooler is a passive cooling solution. Once installed, it operates continuously without requiring any user intervention or power connection. It works by drawing heat away from the M.2 SSD components through the thermal pads and dissipating it into the surrounding air via the aluminum cooling plates. This passive heat exchange helps to maintain lower operating temperatures for your SSD.

6. Wartung

Minimal maintenance is required for the Alphacool HDX M.2 SSD Cooler:

  • Staubentfernung: Periodically inspect the cooling plates for dust accumulation. Use a soft brush or compressed air to gently remove any dust, ensuring optimal airflow around the cooler.
  • Reinigung: If necessary, wipe the exterior of the cooling plates with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.

7. Fehlerbehebung

If you experience issues after installing the cooler, consider the following:

  • SSD Overheating: Ensure the thermal pads are correctly placed and making full contact with the SSD chips and cooling plates. Verify that the clips are securely fastened to provide adequate pressure.
  • Falsche Passform: Double-check that the cooler is correctly aligned with the M.2 SSD and that no components are obstructing its proper seating in the M.2 slot.
  • Systeminstabilität: If system instability occurs after installation, re-verify all connections and ensure the SSD is properly recognized by the system BIOS/UEFI.

8. Spezifikationen

MaterialAluminium
FarbeSchwarz
Cooling Plate Dimensions (LxW)98 x 22 mm
Gewicht29g

9. Garantie und Support

For warranty information and technical support, please refer to the official Alphacool webBesuchen Sie unsere Website oder kontaktieren Sie Ihren Händler. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

© 2023 Alphacool. All rights reserved.