EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

1. Einleitung

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. Packungsinhalt

Bitte prüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind. Sollten Artikel fehlen oder beschädigt sein, wenden Sie sich bitte an Ihren Händler.

• 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
• 2 x 6dBi Dual Band Antennas
• 1 x Bluetooth 9-pin USB Cable
• 1 x Low-Profile Bracket (for small form factor PCs)
• 1 x Schraubendreher
• Befestigungsschrauben
• 1 x Driver CD (or download instructions)

3. Einrichtung und Installation

3.1 Hardware-Installation

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

1. Bereiten Sie Ihren PC vor: Power off your computer and unplug the power cord. Open the side panel of your PC case.
2. Locate a PCI-E slot: Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
3. Netzwerkkarte einlegen: Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
4. Schließen Sie das Bluetooth-Kabel an: Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
   

   Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

5. Sichern Sie die Karte: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile Klammer.
6. Antennen anbringen: Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
   

   Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.
7. PC-Gehäuse schließen: Replace the side panel of your PC case and reconnect the power cord.

3.2 Treiberinstallation

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

1. Verwendung der Treiber-CD: Insert the provided driver CD into your optical drive and follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers.
2. Treiber herunterladen: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel webWebsite oder die EDUP webSeite? ˅ (szedup.com). Suchen nach drivers compatible with the Intel AX200 chipset.
3. Installationsprozess: Führen Sie die heruntergeladene Treiberinstallation aus. files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. Bedienungsanleitung

4.1 Mit WLAN verbinden

Once the drivers are installed, you can connect to a wireless network:

1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
2. Wählen Sie das gewünschte WLAN-Netzwerk aus der Liste aus.
3. Klicken Sie auf „Verbinden“ und geben Sie gegebenenfalls den Netzwerksicherheitsschlüssel (das Passwort) ein.
4. Ihr PC sollte nun mit dem WLAN-Netzwerk verbunden sein.

4.2 Verbinden von Bluetooth-Geräten

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

1. Gehen Sie zu Windows-Einstellungen > Geräte > Bluetooth & andere Geräte.
2. Stellen Sie sicher, dass Bluetooth eingeschaltet ist.
3. Klicken Sie auf „Bluetooth- oder anderes Gerät hinzufügen“ und wählen Sie „Bluetooth“ aus.
4. Versetzen Sie Ihr Bluetooth-Gerät in den Kopplungsmodus.
5. Wählen Sie Ihr Gerät aus der Liste aus und folgen Sie den Anweisungen auf dem Bildschirm, um die Kopplung abzuschließen.

5. Spezifikationen

6. Fehlerbehebung

If you encounter issues with your EDUP network card, refer to the following common solutions:

• Kein WLAN oder Bluetooth erkannt:
  • Ensure the card is securely seated in the PCI-E slot.
  • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
  • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
  • Reinstall the latest drivers from the Intel or EDUP webWebsite.
• Schlechtes WLAN-Signal oder langsame Geschwindigkeiten:
  • Adjust the position of the external antennas for better reception.
  • Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
  • Überprüfen Sie, ob Störungen durch andere elektronische Geräte auftreten.
  • Aktualisieren Sie die Firmware Ihres Routers.
• Bluetooth funktioniert nicht:
  • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
  • Stellen Sie sicher, dass Bluetooth in den Windows-Einstellungen aktiviert ist.
  • Reinstall the Bluetooth driver.

7. Garantie und Support

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.