1. Einleitung
Thank you for choosing the YOSE POWER 36V 10.4Ah Ebike Battery. This manual provides essential information for the safe and efficient use, installation, operation, and maintenance of your new battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Figure 1.1: YOSE POWER 36V 10.4Ah Ebike Battery
This image shows the main product, a black rectangular ebike battery with a power indicator and switch on one end.
2. Sicherheitshinweise
To prevent injury, damage to the product, or property damage, always observe the following safety precautions:
- Lagerung: Store the battery in a cool, dry place. Do not expose the product to fire, water, or excessive moisture.
- Temperatur: Avoid extreme temperatures. Do not charge or use the battery in direct sunlight or in very hot or cold environments.
- Auswirkungen: Protect the battery from physical impact and drops. The battery features drop protection, but severe impacts can still cause damage.
- Demontage: Do not attempt to disassemble, open, or service the battery pack. This can lead to electric shock, fire, or explosion.
- Laden: Use only the charger provided or a charger specifically approved by YOSE POWER for this battery. Overcharging or using an incompatible charger can be dangerous.
- Kurzschluss: Vermeiden Sie einen Kurzschluss der Batteriepole.
- Kinder: Bewahren Sie die Batterie außerhalb der Reichweite von Kindern auf.
- Entsorgung: Dispose of the battery according to local regulations. Do not dispose of it in household waste or fire.
3. Produktüberschreitungview
The YOSE POWER Ebike Battery is designed for reliable performance and durability. It features an intelligent Battery Management System (BMS) to protect against overcharge, over-discharge, overcurrent, and short circuits.
3.1. Packungsinhalt
Prüfen Sie beim Öffnen der Verpackung, ob alle Artikel vorhanden sind:
- YOSE POWER Ebike Battery Pack (36V 10.4Ah)
- Batterieladegerät (42 V 2 A)
- Benutzerhandbuch (dieses Dokument)
Abbildung 3.1: Packungsinhalt
This image displays the battery pack, the charger, and the user manual, which are included in the product package.
3.2. Hauptmerkmale und Komponenten
Figure 3.2: Battery Dimensions and Key Features
This diagram illustrates the battery's dimensions (318mm x 126mm x 44mm) and highlights its core features: BMS protection, drop protection, waterproof/dustproof design, 1000+ cycle life, 36V voltage, 10.4Ah capacity, 2.8kg weight, 385Wh energy, 6 hours charge time, and compatibility with up to 36V 500W motors.
Abbildung 3.3: Wasserdichtes Design
This image shows the battery being splashed with water, demonstrating its waterproof capability.
Figure 3.4: Internal Battery Cells
Eine Nahaufnahme view of the individual lithium-ion battery cells, highlighting the quality of the internal components.
4. Einrichtung
4.1. Erstes Aufladen
Before first use, fully charge the battery. Connect the charger to the battery's charge socket and then plug the charger into a power outlet. The charger's indicator light will show the charging status. Once fully charged, disconnect the charger.
4.2. Installation on E-bike
This battery is designed for compatibility with various e-bikes, including Mifa, Rehberg, Zündapp, and Ansmann systems. Ensure the battery dimensions (318x126x44 mm) are suitable for your e-bike's battery compartment before installation. Refer to your e-bike's manual for specific installation instructions.
Figure 4.1: Battery Compatibility Check
This image provides a visual guide for checking battery length (318mm vs 245mm) and top section height (113mm vs 43mm) to ensure proper fit and compatibility with your e-bike.
5. Bedienungsanleitung
5.1. Ein-/Ausschalten
To turn the battery on or off, press the power switch located on the side of the battery. Ensure the battery is switched on before operating your e-bike.
Figure 5.1: Power Switch and Discharge Socket
This image shows a close-up of the battery's power switch (circular button) and the discharge socket, which connects the battery to the e-bike's motor. The discharge socket specifications are also detailed: Standard Current: 10A, Max. Continuous Current: 20A, Protect Current: 50A, End Voltage: 28 V.
5.2. Überprüfen des Batteriestands
The battery is equipped with a power indicator light. Press the dedicated button next to the indicator lights to visually check the battery's charge level. When fully charged, it displays 1 red light and 3 green lights. When only the last red light appears, the battery charge is low and requires recharging.
Figure 5.2: Battery Level Indicator and Charge Socket
Dieses Bild bietet eine Nahaufnahme views of the battery's power level indicator lights and the charge socket. It explains how to check the battery level and notes that the charge current for this socket should not exceed 5 amps.
5.3. Laden des Akkus
Connect the 42V 2A charger to the battery's charge socket. The charge current for this socket should not exceed 5 amps. A full charge typically takes approximately 6 hours. Always ensure the charger is disconnected once charging is complete.
6. Wartung
Durch sachgemäße Wartung werden die Langlebigkeit und Leistungsfähigkeit Ihrer Batterie sichergestellt:
- Regelmäßiges Laden: Even if not in regular use, charge the battery at least once every three months to maintain cell health.
- Reinigung: Keep the battery and its terminals clean and dry. Use a soft, dry cloth to wipe off any dust or dirt.
- Lagerung: For long-term storage, store the battery in a cool, dry place, ideally at around 50% charge. Avoid storing in extreme temperatures.
- Tiefentladung vermeiden: Do not allow the battery to fully discharge frequently, as this can reduce its lifespan. Recharge promptly when the low battery indicator appears.
7. Fehlerbehebung
If you encounter issues with your YOSE POWER Ebike Battery, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Akku wird nicht geladen | Charger not connected properly; Charger faulty; Battery deeply discharged; Power outlet issue. | Ensure secure connections. Test charger with another device if possible. Try a different power outlet. If deeply discharged, leave connected for a longer period. If problem persists, contact support. |
| Battery not powering e-bike | Battery switched off; Battery discharged; Loose connection to e-bike; E-bike system issue. | Ensure battery is switched on. Check battery level and recharge if necessary. Verify secure connection between battery and e-bike. Consult e-bike manual for system troubleshooting. |
| Batterieanzeigeleuchten funktionieren nicht | Button not pressed; Battery completely discharged; Internal fault. | Press the indicator button firmly. Charge the battery. If still unresponsive after charging, contact support. |
If the issue persists after attempting these solutions, please contact YOSE POWER customer support for further assistance.
8. Spezifikationen
Detailed technical specifications for the YOSE POWER 36V 10.4Ah Ebike Battery:
| Spezifikation | Wert |
|---|---|
| Modellnummer | AE36V10.4Ah |
| Akku-Typ | Lithium-Ionen |
| Nennvolumentage | 36 Volt |
| Kapazität | 10.4 Ah (10,400 mAh) |
| Energie | 385 Wh |
| Maximaler kontinuierlicher Entladestrom | 20 A |
| Protect Current | 50 A |
| Ende Voltage | 28 V |
| Recommended Motor Power | 250 W / 350 W / 500 W |
| Ladegerätausgang | 42 V, 2 A |
| Ladezeit | Ca. 6 Stunden |
| Abmessungen (L x B x H) | 318 x 126 x 44 mm (12.5 x 4.9 x 1.7 Zoll) |
| Gewicht | 2.8 kg |
| Lebensdauer | 1000+ Zyklen |
| Besondere Merkmale | Lightweight, BMS Protection, Drop Protection, Waterproof, Dustproof |
| Zertifizierungen | CE, ROHS, UN38.3 |
9. Garantie und Support
YOSE POWER stands behind the quality of its products.
- Batteriegarantie: 18 Monate ab Kaufdatum.
- Charger Warranty: 12 Monate ab Kaufdatum.
- Rückgaberecht: 30 days no-reason return from the date of purchase.
All batteries undergo QC testing before leaving the factory to ensure quality. If your battery is outside the warranty period, technical support and accessory purchases are still available.
For technical assistance, warranty claims, or any other inquiries, please contact YOSE POWER customer support through the retailer or official webWebsite.