Fantini Cosmi CH140GSM2 Chronothermostat User Manual

1. Einleitung

The Fantini Cosmi CH140GSM2 is a weekly programmable chronothermostat equipped with an integrated GSM modem. This device allows for precise control of both heating and cooling systems, offering remote management capabilities via SMS messages or a dedicated mobile application on smartphones and tablets. Its design focuses on user convenience and energy efficiency, providing various operating modes and alarm functions.

Abbildung 1: Vorderseite view of the CH140GSM2 Chronothermostat, displaying current time and temperature settings.

2. Sicherheitshinweise

• Elektroinstallation: Installation must be performed by qualified personnel in accordance with local electrical codes and regulations. Ensure the main power supply is disconnected before any installation or maintenance work.
• Stromversorgung: Connect the device only to a 230 V-50 Hz power supply.
• Nur zur Verwendung im Innenbereich: This chronothermostat is designed for indoor use. Do not expose it to moisture, extreme temperatures, or direct sunlight.
• SIM-Karte: Use only a micro SIM card. Ensure the SIM card is correctly inserted before powering on the device.
• Reinigung: Reinigen Sie das Gerät mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.

3. Packungsinhalt

Überprüfen Sie, ob alle Komponenten im Paket vorhanden sind:

• Fantini Cosmi CH140GSM2 Chronothermostat
• Bedienungsanleitung (dieses Dokument)
• Montagezubehör (Schrauben, Dübel)

4. Produktüberschreitungview

The CH140GSM2 features an LCD display for clear information display and push-buttons for local control. It includes a micro SIM card slot for GSM functionality and various connection terminals for power and system control.

4.1. Hauptkomponenten

• LCD Anzeige: Shows time, date, temperature, operating mode, and programming.
• Bedientasten: Push-buttons for navigation, selection, temperature adjustment, and mode changes.
• Micro-SIM-Kartensteckplatz: Located on the device for GSM modem functionality.
• Anschlussklemmen: For 230V power, boiler connection (Relay 1), and auxiliary output (Relay 2).
• Temperatursensor: Integrated for ambient temperature measurement.
• Hilfseingänge: Two inputs for alarm management.

Abbildung 2: Schräg view of the CH140GSM2, highlighting the display and control interface.

5. Einrichtung

5.1. Montage

The CH140GSM2 can be mounted directly on a wall or integrated into a standard 3-module flush-mount box (type 503).

1. Ort wählen: Select an indoor location away from direct heat sources, drafts, or direct sunlight to ensure accurate temperature readings.
2. Verkabelung vorbereiten: Ensure the 230V-50Hz power supply and control wires for your heating/cooling system are accessible at the chosen mounting point.
3. Montage:
   • For wall mounting, use the provided screws and wall plugs to secure the backplate to the wall.
   • For flush mounting, integrate the device into a compatible 3-module box.

Figure 3: CH140GSM2 dimensions for mounting reference (13.7 cm width, 9 cm height, 3.2 cm depth).

5.2. Elektrische Verbindung

WARNING: Disconnect main power supply before making any electrical connections.

• Stromversorgung: Connect the 230 V-50 Hz power supply to the designated terminals.
• Relay 1 (Boiler/System Control): Connect the heating or cooling system control wires to Relay 1 (potential-free contact). This relay manages the primary temperature control.
• Relay 2 (Auxiliary): The auxiliary Relay 2 can be used for external ON/OFF control based on daily programming. Connect external electrical loads as required.
• Hilfseingänge: Connect external alarm contacts to the two auxiliary inputs for alarm management. An optional external temperature probe can also be connected.

5.3. SIM-Karteninstallation

The CH140GSM2 requires a micro SIM card for its GSM functionality. Ensure the SIM card is active and has sufficient credit for SMS communication.

1. Locate the micro SIM card slot on the device.
2. Carefully insert the micro SIM card into the slot, ensuring correct orientation.
3. Once inserted, the device is ready for power-on.

5.4. Erstes Einschalten

After mounting and wiring, restore power to the device. The display will illuminate, and the chronothermostat will begin its initialization sequence. Follow on-screen prompts for initial setup, including date and time settings.

6. Bedienungsanleitung

The CH140GSM2 offers both local control via its push-buttons and remote control via SMS or a mobile application.

6.1. Local Control (Push-Buttons)

The device features several push-buttons (SEL, TEMP, PROG, DISP, JOLLY, OFF) for direct interaction:

• SEL (Auswählen): Dient zur Navigation in Menüs und zur Bestätigung von Auswahlen.
• TEMP (Temperatur): Adjusts the desired temperature setpoint.
• PROG (Programm): Greift auf die wöchentlichen Programmeinstellungen zu.
• DISP (Anzeige): Cycles through different display information.
• LUSTIG: Activates the "Jolly" mode for temporary temperature override.
• AUS: Turns the system off.

6.2. Betriebsarten

• Manueller Modus: Maintains a constant temperature set by the user until manually changed.
• Automatik-Modus: Follows the programmed weekly schedule, allowing for two different temperature levels (comfort and economy).
• Urlaubsmodus: Legt eine bestimmte Temperatur für einen festgelegten Zeitraum fest, ideal für Ihre Abwesenheit.
• Jolly Mode: Provides a temporary temperature override for a short duration, after which it reverts to the previous mode.
• Frostschutz: Automatically activates heating if the temperature drops below a set threshold (adjustable between 2°C and 7°C) to prevent freezing.

6.3. Wöchentliches Programm

The CH140GSM2 allows for detailed weekly programming, enabling you to set different temperature levels for various times of the day and days of the week. Refer to the on-screen menu for specific steps to create and modify programs.

1. Drücken Sie die PROG Taste, um in den Programmiermodus zu wechseln.
2. Verwenden Sie die SEL Und TEMP buttons to navigate and adjust time slots and desired temperatures for each day.
3. Speichern Sie Ihre Einstellungen, bevor Sie den Programmiermodus verlassen.

6.4. Remote Control via SMS

The integrated GSM modem allows you to control the chronothermostat by sending specific SMS commands from any mobile phone. Ensure the SIM card in the device has sufficient credit.

Specific SMS commands are detailed in the full product manual. General commands typically include:

• SET TEMP [temperature]: To set a new target temperature.
• MODE [AUTO/MANUAL/HOLIDAY/JOLLY/OFF]: Um den Betriebsmodus zu ändern.
• STATUS: To receive current status information (temperature, mode, etc.).
• ALARM EIN/AUS: To enable or disable alarm notifications.

The thermostat will typically respond with an SMS confirmation of the command execution or current status.

6.5. Remote Control via Mobile Application

A dedicated mobile application (available for smartphones and tablets) provides an intuitive interface for managing the CH140GSM2. The app communicates with the thermostat via the GSM network.

1. Lade App herunter: Suchen nach the official Fantini Cosmi chronothermostat app on your device's app store (e.g., Apple App Store, Google Play Store).
2. Registrieren/Anmelden: Follow the app's instructions to create an account or log in.
3. Thermostat hinzufügen: Add your CH140GSM2 to the app, typically by entering its unique identifier or phone number associated with the SIM card.
4. App-Funktionen:
   • Adjust temperature setpoints.
   • Wählen Sie verschiedene Betriebsmodi.
   • Manage multiple thermostats or multiple homes from a single app.
   • Receive alarm alerts for temperature threshold breaches (minimum and maximum) or from auxiliary input contacts.
   • Share thermostat control with other users.

7. Wartung

7.1. Reinigung

To maintain the appearance and functionality of your chronothermostat:

• Wischen Sie die Außenseite mit einem weichen, trockenen, fusselfreien Tuch ab.
• Do not use liquid cleaners, aerosol sprays, or abrasive solvents, as these can damage the device.

7.2. SIM-Kartenverwaltung

Regularly check the credit balance of the SIM card installed in the chronothermostat to ensure uninterrupted remote communication. Top up the credit as needed according to your mobile network provider's instructions.

8. Fehlerbehebung

If you encounter issues with your CH140GSM2 chronothermostat, refer to the following common problems and solutions:

For issues not covered here, please contact Fantini Cosmi customer support or a qualified technician.

9. Spezifikationen

10. Garantie und Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, assistance, or to report any issues, please contact Fantini Cosmi customer service or visit their official webSite für aktuelle Kontaktinformationen.

Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.