1. Zu Endeview
The NZXT H200 is a compact Mini-ITX PC gaming case designed for enthusiasts seeking a small form factor build without compromising on features or aesthetics. It features an all-steel construction, a tempered glass side panel, and an integrated cable management system for a clean and organized build. The case supports water cooling configurations and includes two pre-installed Aer F fans for optimal airflow.
Abbildung 1: Vorderseite view of the NZXT H200 Mini-ITX PC Gaming Case.
2. Einrichtung und Installation
This section guides you through the process of setting up your NZXT H200 case and installing your PC components.
2.1 Öffnen des Gehäuses
To access the interior, first remove the tempered glass side panel by unscrewing the captive thumb screws. For the rear panel, locate the small push-button mechanism on the back of the case, above the I/O shield area. Pressing this button will release the rear panel, allowing access to the cable management area and accessory box. Handle panels carefully to avoid damage.
Abbildung 2: Rückseite view of the NZXT H200 case, highlighting the panel release mechanism.
2.2 Motherboard-Installation
- Ensure the I/O shield (if not integrated with your motherboard) is installed into the case's rear opening.
- Align your Mini-ITX motherboard with the standoffs inside the case.
- Secure the motherboard using the provided screws from the accessory box.
2.3 Installation der Stromversorgung
The NZXT H200 supports a bottom-mount power supply. Slide your power supply into the designated compartment at the bottom rear of the case and secure it with screws from the exterior rear panel.
2.4 Laufwerksinstallation
The case provides multiple mounting points for 2.5-inch SSDs and 3.5-inch HDDs. Utilize the removable drive trays and cages located behind the motherboard tray and on the PSU shroud. Secure drives with the appropriate screws.
2.5 Kabelmanagement
Utilize the integrated cable management bar and routing channels behind the motherboard tray. Velcro straps are provided to secure cables, ensuring a clean interior and optimal airflow.
Abbildung 3: Intern view showcasing the cable management system.
2.6-Kühlsystem
The H200 comes with two pre-installed Aer F fans. Additional fan and radiator mounting points are available for enhanced air or liquid cooling configurations. Ensure proper fan direction for optimal airflow.
Figure 4: Internal layout of the NZXT H200, showing fan placement and component areas.
3. Bedienung Ihres PC-Gehäuses
Once all components are installed and secured, and all necessary cables are connected, you can close the case panels. Connect your peripherals, monitor, and power cable to your PC. Use the power button on the top panel to turn on your system. The case is designed to provide efficient airflow for your components, contributing to stable system operation.
4. Wartung
Regelmäßige Wartung trägt dazu bei, die optimale Leistung und Langlebigkeit Ihrer PC-Komponenten zu gewährleisten.
4.1 Reinigung des Staubfilters
The NZXT H200 includes removable dust filters. Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and cooling efficiency. Use compressed air or a soft brush to remove dust.
4.2 Pflege von gehärteten Glasscheiben
Clean the tempered glass panel with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive materials that could scratch the glass.
4.3 Allgemeine Gehäusereinigung
Wischen Sie die Außenseite des Gehäuses mit einem weichen, fusselfreien Tuch ab.amp cloth. Ensure the case is powered off and unplugged before cleaning.
5. Fehlerbehebung
In diesem Abschnitt werden häufig auftretende Probleme behandelt.
5.1 Difficulty Opening Rear Panel / Finding Accessories
As noted in the setup section, the rear panel is released by a small push-button on the back of the case. The accessory box and manual are typically located within a 3.5-inch HDD enclosure in the lower chamber, accessible once the rear panel is open.
5.2 Cable Routing Challenges
If you encounter difficulties with cable routing, ensure you are utilizing the dedicated cable management channels and Velcro straps. The main 24-pin ATX motherboard connector might require careful routing around the central cable management bar.
5.3 Insufficient Airflow or High Temperatures
Verify that all fans are correctly installed and oriented to create an effective airflow path (intake and exhaust). Ensure dust filters are clean and not obstructed. Check that no internal cables are blocking airflow.
For further assistance, refer to the NZXT support webWebsite oder wenden Sie sich an den Kundendienst.
6. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Marke | NZXT |
| Modellname | NZXT H200 |
| Motherboard-Kompatibilität | Mini-ITX |
| Gehäusetyp | Desktop |
| Material | Legierter Stahl, gehärtetes Glas |
| Kühlmethode | Luft, Wasser |
| Anzahl der Lüfter | 2 (vorinstalliert) |
| Artikelgewicht | 13.2 Pfund |
| Anzahl USB-Anschlüsse | 2 (USB-2.0) |
| Internal Bays Quantity | 3 (for 3.5-inch and 2.5-inch drives) |
| Montageart des Netzteils | Untere Montage |
7. Garantie und Support
7.1 Garantieinformationen
The NZXT H200 PC Gaming Case comes with a 2 Jahr Garantie Diese Garantie gilt ab Kaufdatum und deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
7.2 Kundendienst
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official NZXT webSeite unter www.nzxt.com/support. You can find FAQs, driver downloads, and contact information for their support team.