Einführung
The StarTech.com SV431DHD4KU is a 4-port Dual Monitor HDMI KVM Switch designed to control four HDMI-enabled computers from a single console (keyboard, mouse, and two monitors). This device supports resolutions up to 4K 30Hz and includes a built-in 2-port USB 3.0 hub for sharing peripherals, as well as 3.5mm audio ports for independent audio control.
Packungsinhalt
- 1x SV431DHD4KU 4-Port Dual Monitor HDMI KVM Switch
- 1x Kurzanleitung
- 4x Gummifüße
- 1x Universal Power Adapter (NA/JP, UK, EU, ANZ)
Produktdiagramm
Vorderseite
- HID USB Port: Connect your keyboard or mouse.
- USB 3.0-Anschluss: Connect USB 3.0 peripherals.
- Computer Selection Buttons (1-4): Drücken Sie diese Taste, um zum entsprechenden Computer zu wechseln.
- Betriebsanzeige: Illuminates when the KVM switch is powered on.
Rückseite
- Gleichstromeingang 9-12V: Schließen Sie das mitgelieferte Netzteil an.
- Konsolenports:
- 2x USB HID Ports (Keyboard/Mouse)
- 2x USB 3.0-Anschlüsse
- 2x 3.5mm Audio Out (Speakers)
- 2x 3.5mm Audio In (Microphone)
- PC Input Ports (PC1-PC4): Each computer requires:
- 2x HDMI Input Ports
- 1x USB 3.0 Input Port
- 1x 3.5mm Audio Out (from PC)
- 1x 3.5mm Audio In (to PC)
Setup und Installation
Führen Sie diese Schritte aus, um Ihren KVM-Switch und Ihre Computer zu verbinden:
- Alle Geräte ausschalten: Ensure all computers, monitors, and the KVM switch are powered off and unplugged.
- Konsolengeräte anschließen: Connect your keyboard and mouse to the HID USB ports on the KVM's console side. Connect your two HDMI monitors to the console HDMI output ports. Connect your speakers and microphone to the 3.5mm audio ports on the console side.
- Computer verbinden: For each computer (PC1 to PC4):
- Connect two HDMI cables from the computer's video output to the corresponding HDMI input ports on the KVM switch (e.g., PC1 HDMI 1 and PC1 HDMI 2).
- Connect a USB 3.0 cable from the computer's USB port to the corresponding USB 3.0 input port on the KVM switch (e.g., PC1 USB 3.0).
- Connect 3.5mm audio cables from the computer's audio output and input to the corresponding audio ports on the KVM switch (e.g., PC1 Audio Out and PC1 Audio In).
- Strom anschließen: Plug the universal power adapter into the DC 9-12V input on the KVM switch, then plug the adapter into a power outlet.
- Einschalten: Power on the KVM switch, then power on your monitors, and finally power on your connected computers.
Betrieb
Switching Computers
You can switch between connected computers using the front panel buttons or keyboard hotkeys.
- Tasten auf der Vorderseite: Press the corresponding numbered button (1-4) on the front panel of the KVM switch to select the desired computer.
- Tastatur-Hotkeys: Use specific key combinations on your connected keyboard to switch between computers. Refer to the Quick-Start Guide for the exact hotkey sequences.
USB 3.0 Hub Functionality
The KVM switch features a 2-port USB 3.0 hub on the console side. Any devices connected to these ports will automatically switch to the currently selected computer, allowing for shared access to peripherals like external hard drives, webcams, or printers.
Audio-Freigabe
The 3.5mm audio ports provide independent analog audio switching. Your speakers and microphone connected to the console will switch along with the selected computer, providing full multimedia control.
Technische Daten
| Besonderheit | Spezifikation |
|---|---|
| Modell | SV431DHD4KU |
| Marke | StarTech.com |
| Anzahl der Ports | 4 |
| Video Interface | HDMI (Dual Monitor) |
| Maximale Auflösung | 4K 30Hz |
| USB-Hub | 2-Port-USB 3.0 |
| Audio | 3.5mm Stereo Audio (In/Out) |
| Kontrollmethode | Push Button, Hotkeys |
| Material | Stahl |
| Abmessungen (L x B x H) | 8.7 x 5.1 x 2.5 Zoll (22.1 x 13.0 x 6.4 cm) |
| Artikelgewicht | 2.73 kg |
| Netzteil | DC 9-12V, 1.5A (18W) |
| Betriebstemperatur | 0 °C bis 40 °C (32 °F bis 104 °F) |
Fehlerbehebung
- Keine Videoausgabe:
- Ensure all HDMI cables are securely connected between the computers, KVM, and monitors.
- Verify that the KVM switch is powered on and the correct computer port is selected.
- Überprüfen Sie die Eingangseinstellungen des Monitors, um sicherzustellen, dass der richtige HDMI-Eingang ausgewählt ist.
- Try using different HDMI cables or connecting monitors directly to a computer to rule out cable or monitor issues.
- Tastatur/Maus reagiert nicht:
- Ensure the keyboard and mouse are connected to the dedicated HID USB ports on the KVM console.
- Verify that the USB cables from the computers to the KVM are securely connected.
- Some advanced keyboards/mice may require connection to the USB 3.0 hub ports instead of HID ports for full functionality.
- Starten Sie den KVM-Switch und die Computer neu.
- Audioprobleme:
- Check all 3.5mm audio cable connections.
- Ensure audio output/input settings on the selected computer are configured correctly.
- Verify speaker and microphone connections and functionality.
- USB 3.0-Geräte nicht erkannt:
- Ensure the USB 3.0 cables from the computers to the KVM are connected.
- Some high-power USB 3.0 devices may require an external power source.
- Bewahren Sie das Gerät an einem kühlen, trockenen Ort auf, fern von direkter Sonneneinstrahlung und Wärmequellen.
- Reinigen Sie die Außenseite mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von scharfen Chemikalien oder Scheuermitteln.
- Sorgen Sie für eine ausreichende Belüftung rund um das Gerät, um eine Überhitzung zu vermeiden.
Wartung
Um die Langlebigkeit und optimale Leistung Ihres KVM-Switches zu gewährleisten:
Garantie und Support
This StarTech.com SV431DHD4KU KVM Switch is backed by a 2 Jahr Garantie.
For technical support, product information, or to access drivers and manuals, please visit the official StarTech.com webBesuchen Sie die Website oder kontaktieren Sie direkt deren Kundendienst.
Produkt überview Video
Sehen Sie sich dieses Video an, um einen visuellen Überblick zu erhalten.view of the StarTech.com 4-Port Dual Monitor HDMI KVM Switch, highlighting its features and benefits.