Einhell Power X-Change 18V Cordless Long Reach Hedge Trimmer GE-HH 18/45 Li T Solo User Manual

1. Produktüberschreitungview

The Einhell Power X-Change GE-HH 18/45 Li T is a powerful 18V cordless long reach hedge trimmer designed for maintaining hedges, shrubs, and bushes, especially at height. This tool offers cordless freedom and is part of the Einhell Power X-Change battery system (battery and charger sold separately).

Zu den Hauptmerkmalen gehören:

• Kabellose Freiheit: Operates on an 18V Power X-Change battery for unrestricted movement.
• Teleskopgriff: Infinitely adjustable aluminum handle extends up to 2.5 meters (8 feet 2 inches) for reaching high areas.
• Präzisionsklingen: Laser-cut and diamond-ground steel blades provide clean, sharp cuts with a cutting length of 400mm (16 inches) and 16mm teeth spacing.
• Einstellbarer Schneidkopf: A 7-position tiltable cutting head allows for versatile trimming angles.
• Ausgewogenes Design: Handle-mounted motor ensures optimal balance, reducing fatigue during extended use.
• Langlebige Konstruktion: Features a robust metal gearbox for long-lasting performance.

2. Sicherheitshinweise

Sicherheit hat beim Umgang mit Elektrowerkzeugen stets oberste Priorität. Lesen und verstehen Sie vor der Benutzung alle Sicherheitshinweise und Anweisungen. Die Nichtbeachtung dieser Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.

• Persönliche Schutzausrüstung (PSA): Always wear appropriate PPE, including safety glasses, hearing protection, sturdy gloves, and non-slip footwear. A safety helmet with a face shield is recommended, especially when working overhead.
• Arbeitsbereich: Keep the work area clean and well-lit. Do not operate the trimmer in wet or damp conditions. Keep bystanders, children, and pets at a safe distance (at least 15 meters / 50 feet).
• Werkzeuginspektion: Before each use, inspect the trimmer for any damage, loose parts, or worn blades. Do not use a damaged tool.
• Batteriesicherheit: Use only Einhell Power X-Change 18V batteries and chargers. Do not expose batteries to heat, direct sunlight, or water.
• Richtiger Griff: Always hold the trimmer firmly with both hands.
• Vermeiden Sie Hindernisse: Be aware of hidden wires, fences, or other objects that could be struck by the blades.
• Wartung: Disconnect the battery before performing any maintenance, cleaning, or when clearing jammed material.
• Lagerung: Store the trimmer in a dry, secure place out of reach of children.

3. Enthaltene Komponenten

The following components are typically included with your Einhell GE-HH 18/45 Li T hedge trimmer:

• Heckenscherenkopf
• Ausziehbarer Mast
• Klingenschutz
• Bedienungsanleitung

Note: Battery and charger are not included and must be purchased separately as part of the Power X-Change system.

4. Einrichtung

Follow these steps to prepare your hedge trimmer for use:

1. Zusammenbau der Stange: Connect the hedge trimmer head to the extendable pole. Ensure all connections are secure and locked into place according to the diagrams in the full manual.
2. Stangenlänge einstellen: Loosen the locking mechanism on the telescopic aluminum handle. Extend the pole to the desired length for your task, then securely tighten the locking mechanism. The pole can be adjusted from 1.6m to 2.5m.
3. Batterie einlegen: Ensure the battery is fully charged. Align the battery with the battery slot on the trimmer's handle and slide it in until it clicks securely into place.
4. Schultergurt anbringen: For comfortable and balanced operation, especially when extended, attach the provided shoulder strap to the designated points on the trimmer. Adjust the strap for a snug fit.
5. Klingenschutz entfernen: Carefully remove the blade guard from the cutting blades before starting the trimmer. Always replace the blade guard when the tool is not in use or during transport.

5. Bedienungsanleitung

Before operating, ensure you have read the safety instructions and the trimmer is properly set up.

1. Starten des Trimmers: With the battery inserted, press the safety lock-off button (if present) and then squeeze the trigger switch to start the motor. Release the trigger to stop.
2. Einstellen des Schneidkopfwinkels: The cutting head can be tilted to 7 different positions. To adjust, press the release button/lever on the head, set it to the desired angle, and ensure it locks securely in place. This allows for ergonomic cutting of hedge tops and sides.
3. Trimmtechnik:
   • For vertical surfaces, use a sweeping motion from bottom to top.
   • For horizontal surfaces, hold the trimmer slightly angled (about 10-15 degrees) to ensure a clean cut and allow clippings to fall away.
   • Avoid forcing the blades through thick branches. If the blades jam, immediately release the trigger and remove the battery before clearing the obstruction.
4. Working at Height: When using the extended pole, maintain a stable stance. Use the shoulder strap to distribute weight and reduce strain. Be mindful of overhead power lines and other obstacles.
5. Den Trimmer anhalten: Release the trigger switch. The blades will stop quickly. Always remove the battery when finished or before making adjustments.

6. Wartung

Regelmäßige Wartung gewährleistet optimale Leistung und verlängert die Lebensdauer Ihrer Heckenschere.

• Klingenreinigung: After each use, remove the battery and carefully clean the blades with a stiff brush to remove sap and debris.
• Klingenschmierung: Apply a light machine oil or blade lubricant to the cutting blades after cleaning to prevent rust and ensure smooth operation.
• Klingenschärfen: Dull blades can tear foliage and strain the motor. Have the blades professionally sharpened or replace them if they become excessively dull or damaged.
• Allgemeine Reinigung: Wipe down the housing of the trimmer with a damp Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Lagerung: Store the trimmer in a dry, secure location, away from moisture and extreme temperatures. Always reattach the blade guard before storage. Remove the battery if storing for extended periods.

7. Fehlerbehebung

In diesem Abschnitt werden häufig auftretende Probleme behandelt, die bei Ihrer Heckenschere auftreten können.

8. Spezifikationen

Technical data for the Einhell GE-HH 18/45 Li T hedge trimmer:

• Modellnummer: 3410866
• Energiequelle: 18V Battery Powered (Power X-Change system)
• Klingenlänge: 450 mm (17.7 Zoll)
• Schnittlänge: 400 mm (16 Zoll)
• Teeth Spacing: 16 mm
• Produktabmessungen (L x B x H): 82.28" x 5.12" x 6.69" (209 cm x 13 cm x 17 cm)
• Artikelgewicht: 4.28 Kilogramm (9.44 Pfund)
• Klingenmaterial: Legierter Stahl
• Griffmaterial: Aluminium
• Hersteller: Einhell

9. Garantie und Support

For warranty information, technical support, or to order spare parts, please refer to the official Einhell webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.

Verfügbarkeitsdauer von Ersatzteilen in der EU: 2 Jahre

Weitere Hilfe finden Sie unter Einhell offiziell webWebsite.