Lepro 11-inch 24W Flush Mount LED Ceiling Light User Manual

1. Sicherheitshinweise

Bitte lesen Sie vor der Installation und Inbetriebnahme alle Anweisungen sorgfältig durch. Bewahren Sie diese Anleitung zum späteren Nachschlagen auf.

• Elektrische Sicherheit: Always turn off the power at the circuit breaker before beginning any electrical work. Ensure proper grounding. If you are unsure about electrical installations, consult a qualified electrician.
• Nur zur Verwendung im Innenbereich: This fixture is designed for indoor use.
• Wasserbeständigkeit: The light fixture has an IP54 water-resistant and dustproof rating, making it suitable for damp locations like bathrooms and kitchens. However, it is not designed for direct water immersion.
• Nicht dimmbar: This LED ceiling light is nicht dimmbar. Do not connect it to a dimmer switch, as this may damage the fixture.
• Hitze: Obwohl LED-Leuchten weniger Wärme erzeugen als herkömmliche Glühbirnen, sollte für ausreichende Belüftung rund um die Leuchte gesorgt werden.
• Kinder: Keep packaging materials away from children to avoid danger of suffocation.

2. Produktüberschreitungview

The Lepro 11-inch Flush Mount LED Ceiling Light provides efficient and bright illumination for various indoor spaces. Its slim design integrates seamlessly with modern interiors.

• Modell: PR1500035-WW
• Größe: 11 inches (28 cm) diameter, 1.97 inches (5 cm) height.
• Leistung: 24 Watt
• Helligkeit: 2400 Lumen
• Farbtemperatur: 3000 Kelvin (Sanftwarmweiß)
• Wasserbeständigkeit: IP54 (wasser- und staubdicht)
• Lebensdauer: Über 20,000 Stunden
• Material: Plastik
• CRI: >80 (Color Rendering Index)
• Äquivalent: Approximately 200W incandescent equivalent.
• Energieeffizienz: Saves up to 88% on energy compared to traditional lighting.

Figure 2.1: The Lepro 11-inch LED Ceiling Light providing warm and cozy illumination in a living room setting.

Figure 2.2: The ceiling light illuminating a modern kitchen, showcasing its broad light distribution.

Figure 2.3: The IP54 waterproof design makes this light suitable for bathroom environments.

Figure 2.4: The 24W LED light offers significant energy savings compared to two 100W incandescent bulbs.

Figure 2.5: Product dimensions showing 11-inch diameter and 1.97-inch height, ideal for low ceilings.

3. Installationsanleitung

Follow these steps for safe and proper installation of your Lepro LED Ceiling Light. Ensure power is off before starting.

1. Strom ausschalten: Suchen Sie den Sicherungsautomaten, der die Leuchte steuert, und schalten Sie den Strom ab. Überprüfen Sie mit einem Spannungsprüfer, ob der Strom tatsächlich abgeschaltet ist.tage Tester.
2. Remove Mounting Bracket: Gently pull the spring tabs on the light fixture and remove the mounting bracket from the back of the lamp Körper.
3. Measure Hole Spacing: Use the removed mounting bracket to measure the appropriate hole spacing for your ceiling type. The bracket supports a minimum distance of 2.7 inches and a maximum distance of 4 inches for mounting holes.
4. Montagehalterung installieren:
   • Für Holzdecken: Use the provided screws to directly fix the mounting bracket to the wooden ceiling.
   • For Cement Ceiling: Drill two holes at the measured spacing, insert the plastic anchors, then fix the mounting bracket with screws.
   • For Junction Box: Align the mounting bracket with the existing holes on your junction box and secure it with the provided screws.
5. Verkabelung vorbereiten: Open the waterproof wiring compartment on the light fixture.
6. Kabel anschließen: Insert the household electrical wires into the electrical connections labeled 'N' (Neutral) and 'L' (Live) on the fixture. Ensure a secure connection.
7. Sichere Verkabelung: Straighten out the wires, place the rubber sealant into position, and close the wiring compartment securely.
8. Montieren Sie das Lamp: Align the light fixture with the installed mounting bracket. Pull the lamp's spring tabs and latch it onto the bracket, pushing the light firmly against the ceiling until it clicks into place.
9. Strom wiederherstellen: Schalten Sie den Strom am Leistungsschalter wieder ein.

Figure 3.1: Visual guide for installing the ceiling light, showing bracket removal, wire connection, and final mounting.

4. Bedienungsanleitung

This Lepro LED Ceiling Light is designed for simple operation.

• Ein-/Ausschalten: Use a standard wall switch to turn the light fixture on or off.
• Nicht dimmbar: As noted in the safety information, this fixture is not dimmable. It will operate at full brightness when switched on.

5. Wartung

The Lepro LED Ceiling Light requires minimal maintenance due to its integrated LED design and durable construction.

• Reinigung: Vor der Reinigung unbedingt den Strom abschalten. Wischen Sie die Leuchte mit einem weichen, trockenen oder leicht feuchten Tuch ab.amp Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Kein Glühbirnenwechsel: The LED lights are integrated and designed to last over 20,000 hours, eliminating the need for bulb replacement.
• Inspektion: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified professional.

6. Fehlerbehebung

If you encounter issues with your Lepro LED Ceiling Light, refer to the following common troubleshooting steps:

7. Spezifikationen

8. Garantie und Support

This Lepro LED Ceiling Light comes with a 2 Jahr Garantie vom Hersteller.

For further assistance, product information, or to explore other Lepro products, please visit the official Lepro Store:

Visit the Lepro Store