Ushio BC2771 G10T8 Keimtötend Lamp Bedienungsanleitung

1. Einleitung und Produktübersichtview

The Ushio BC2771 G10T8 is a 9.5W low-pressure mercury-arc lamp designed for germicidal applications. This lamp emits ultraviolet-C (UV-C) radiation, specifically peaking at 253.7 nanometers (Nm). This wavelength is highly effective in inactivating various microorganisms, including bacteria, viruses, yeasts, and molds, making it suitable for disinfection purposes.

Figure 1: Ushio BC2771 G10T8 Germicidal Lamp. This image displays the clear tubular glass body of the lamp with a G13 2-pin base at one end, showing the internal filament structure.

2. Sicherheitshinweise

WARNUNG: Dieses lamp emits UV-C radiation, which is harmful to skin and eyes. Direct exposure can cause severe burns and eye damage. Always ensure proper shielding and never look directly at an operating germicidal lamp.

• Avoid direct exposure to UV-C radiation.
• Wear appropriate UV-protective eyewear and clothing if exposure is unavoidable during maintenance.
• Stellen Sie sicher, dass die lamp is installed in a fixture that provides adequate shielding for occupants.
• Disconnect power before installation, removal, or maintenance.
• Entsorgen Sie lamps according to local regulations for mercury-containing products.

3. Einrichtung und Installation

Dieses lamp is designed for use in compatible fixtures with a G13 2-pin base. Installation should only be performed by qualified personnel following all local electrical codes and safety guidelines.

1. Stromabschaltung: Ensure the power supply to the fixture is completely disconnected before beginning installation.
2. Handhabung: Behandeln Sie das lamp by its base, not the glass tube. Avoid touching the glass with bare hands, as oils can create hot spots and reduce lamp life. If the glass is touched, clean it with an alcohol wipe before operation.
3. Einfügung: Align the two pins of the lamp base with the corresponding slots in the G13 lamp holder. Gently push and twist the lamp until it is securely seated.
4. Überprüfung: Stellen Sie sicher, dass die lamp is firmly in place and the fixture provides adequate shielding from UV-C radiation.
5. Stromanschluss: Stellen Sie die Stromversorgung des Geräts wieder her.

4. Bedienungsanleitung

Once properly installed, the Ushio BC2771 G10T8 lamp operates by receiving electrical current through its G13 base, which energizes the mercury vapor within the lamp to produce UV-C radiation.

• Aktivierung: Turn on the power switch connected to the fixture. The lamp will illuminate, emitting UV-C light.
• Dauer der Operation: The required operating time for effective disinfection depends on the application, air flow, and distance to the target. Consult specific system guidelines for optimal disinfection cycles.
• Deaktivierung: Turn off the power switch to deactivate the lamp.
• Umgebungsbedingungen: Bedienen Sie die lamp within recommended temperature and humidity ranges for optimal performance and lifespan.

5. Wartung

Regular maintenance ensures the continued effectiveness and longevity of your germicidal lamp.

• Reinigung: Periodically, with the power disconnected and the lamp cooled, gently wipe the glass tube with a clean, lint-free cloth moistened with isopropyl alcohol. This removes dust and fingerprints that can impede UV-C transmission.
• Ersatz: The Ushio BC2771 G10T8 has a rated life of approximately 8,000 hours. While the lamp may continue to emit visible light beyond this period, its germicidal effectiveness (UV-C output) will diminish significantly. It is recommended to replace the lamp after 8,000 hours of operation or as specified by your system's maintenance schedule.
• Entsorgung: Entsorgen Sie gebrauchtes lamps in accordance with all local, state, and federal regulations for mercury-containing waste. Do not dispose of in regular trash.

6. Fehlerbehebung

Wenn das lamp Falls es nicht ordnungsgemäß funktioniert, beachten Sie bitte Folgendes:

• Lamp Keine Beleuchtung:
  • Prüfen Sie, ob die Stromversorgung der Leuchte aktiv ist.
  • Stellen Sie sicher, dass die lamp is correctly seated in the G13 base.
  • Untersuche das lamp bei sichtbaren Schäden (z. B. zerbrochenes Glas, lose Stecknadeln).
  • Verify the ballast or starter in the fixture is functioning correctly.
• Dim Light or Reduced Effectiveness:
  • Die lamp may be nearing the end of its effective germicidal life (8,000 hours). Consider replacement.
  • Die lamp surface may be dirty. Clean as per maintenance instructions.
  • Ensure the operating environment is within recommended parameters.

If issues persist after troubleshooting, consult a qualified electrician or the fixture manufacturer for assistance.

7. Spezifikationen

8. Garantie und Support

The manufacturer's warranty description for this product is stated as 'Not applicable'. For specific warranty details or support inquiries, please refer to the retailer or the original equipment manufacturer (OEM) of the fixture in which this lamp is used. Always retain your proof of purchase.