CASIO HS-6-2JH Stopwatch Instruction Manual

1. Produktüberschreitungview

The CASIO HS-6-2JH is a compact and lightweight digital stopwatch designed for precise time measurement. It features a simple interface for various timing functions, including normal measurement, accumulated time, lap/split times, and 1st/2nd place finishes. Its design prioritizes ease of use and silent operation.

Image 1: The CASIO HS-6-2JH Stopwatch, showcasing its ergonomic design and compact size.

Hauptmerkmale:

• 1/100 Sekunden Stoppuhr: Measures time with high precision.
• 10-Hour Meter: Capable of timing events up to 10 hours.
• Mehrere Messmodi: Includes normal time, accumulated time, lap time, split time, and 1st/2nd place finishes.
• Leiser Betrieb: Buttons are designed to operate without producing audible feedback.
• Lange Akkulaufzeit: Approximately 3 years with a single CR2025 button battery.
• Leichtes und ergonomisches Design: Easy to hold and operate.

2. Einrichtung

Einlegen der Batterie

The CASIO HS-6-2JH Stopwatch operates on one CR2025 button battery. The battery is typically pre-installed. If the display is dim or blank, battery replacement may be necessary.

1. Suchen Sie das Batteriefach auf der Rückseite der Stoppuhr.
2. Using a small Phillips-head screwdriver, carefully remove the screws securing the battery compartment cover.
3. Remove the cover and gently extract the old CR2025 battery.
4. Legen Sie eine neue CR2025-Batterie mit der positiven (+) Seite nach oben ein.
5. Replace the battery compartment cover and secure it with the screws. Ensure the cover is properly sealed.

After battery installation, the stopwatch display should activate. If not, ensure the battery is correctly inserted and fully charged.

3. Bedienungsanleitung

Die Stoppuhr verfügt über drei Hauptknöpfe: START/STOP, SPLIT/LAP, Und MODUS. Refer to the image below for button locations.

Bild 2: Vorderseite view of the stopwatch, highlighting the display and control buttons.

Basic Stopwatch Functions (Normal Measurement)

1. Drücken Sie die MODUS button until the stopwatch display shows "0:00'00"00".
2. Drücken START/STOP um mit der Zeitmessung zu beginnen.
3. Drücken START/STOP Um die Zeitmessung erneut anzuhalten.
4. Um fortzufahren, drücken Sie START/STOP.
5. Um die Stoppuhr auf Null zurückzusetzen, drücken Sie SPLIT/LAP while the stopwatch is stopped.

Lap and Split Measurement

This function allows you to record intermediate times (lap) and cumulative times (split) during an event.

1. Start the stopwatch by pressing START/STOP.
2. Zum Aufzeichnen eines Split-Zeit (cumulative time from start), press SPLIT/LAP. The display will momentarily show the split time while the internal timer continues.
3. Zum Aufzeichnen eines Rundenzeit (time for the current segment), press SPLIT/LAP again after a split time is displayed. The display will show the lap time.
4. Repeat step 2 and 3 for subsequent splits and laps.
5. Drücken START/STOP um das Timing zu beenden.
6. Drücken SPLIT/LAP um die Stoppuhr zurückzusetzen.

1st and 2nd Place Time Measurement

This mode is useful for recording the finish times of two competitors in a single event.

1. Start the stopwatch by pressing START/STOP.
2. When the first competitor finishes, press SPLIT/LAP. The display will show the 1st place time.
3. When the second competitor finishes, press START/STOP um den Timer zu stoppen.
4. Drücken SPLIT/LAP Zu view the 2nd place time.
5. Drücken SPLIT/LAP again to reset the stopwatch.

Silencing Feature

The CASIO HS-6-2JH is designed for silent operation, meaning button presses do not produce audible feedback. This feature is always active and does not require specific activation or deactivation steps.

4. Wartung

Reinigung

• Wipe the stopwatch with a soft, dry cloth.
• Bei hartnäckigem Schmutz verwenden Sie ein leichtamp Mit einem milden Seifentuch befeuchten und anschließend sofort trocken wischen.
• Verwenden Sie keine Scheuermittel, Lösungsmittel oder chemische Sprays, da diese das Material beschädigen können.asing und Anzeige.

Batteriewechsel

Refer to the "Battery Installation" section under Setup for detailed instructions on replacing the CR2025 battery. Replace the battery when the display becomes dim or unresponsive.

Lagerung

Store the stopwatch in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid exposing it to strong magnetic fields.

5. Fehlerbehebung

6. Spezifikationen

Image 3: Dimensions of the CASIO HS-6-2JH Stopwatch.

7. Garantie und Support

Garantieinformationen

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

Kundenservice

For technical assistance, service, or inquiries regarding your CASIO HS-6-2JH Stopwatch, please contact your local Casio authorized service center or the retailer from whom you purchased the product. Contact details can typically be found on the Casio official weboder auf Ihrer Produktverpackung.