DEWALT 18V XRP Battery Pack (DC9096-2) Instruction Manual

1. Einleitung

The DEWALT 18V XRP Battery Pack (DC9096-2) is designed to provide extended runtime for your DEWALT 18V cordless tools. This pack includes two high-capacity NiCAD batteries, offering reliable power and consistent performance for a wide range of applications. This manual provides detailed instructions for the safe operation, charging, maintenance, and troubleshooting of your battery pack.

Figure 1: DEWALT 18V XRP Battery Pack (DC9096-2)

2. Hauptmerkmale

• Hohe Kapazität: Includes two XRP NiCAD batteries designed for 25% more runtime compared to standard NiCAD batteries.
• Breite Kompatibilität: Powers the entire DEWALT line of 18V tools, allowing for versatile use across multiple devices (excluding Univolt tools).
• Zuverlässige Leistung: Utilizes top-quality NiCAD cells for consistent and adaptable power delivery.
• Verbesserte Laufzeit: Features extended runtime technology, delivering increased operational duration for demanding tasks.

3. Sicherheitshinweise

Always follow these safety guidelines to prevent injury and damage to the battery pack or tools:

• Do not incinerate the battery pack, even if it is severely damaged or completely dead. The battery can explode in a fire.
• Schließen Sie die Batteriepole nicht kurz.
• Laden Sie den Akku nicht im Standby-Modus.amp oder feuchten Umgebungen.
• Use only DEWALT chargers specified for this battery pack. Using other chargers may result in fire, electric shock, or damage to the battery.
• Do not store the battery pack in locations where the temperature may reach or exceed 120°F (49°C), such as in a shed or metal building in summer.
• Do not open or disassemble the battery pack. There are no user-serviceable parts inside.
• Bewahren Sie Akkus außerhalb der Reichweite von Kindern auf.

4. Laden des Akkus

To ensure optimal performance and longevity, always charge your DEWALT 18V XRP battery pack using a compatible DEWALT charger.

1. Schließen Sie das Ladegerät an eine geeignete Steckdose an.
2. Schieben Sie den Akku fest in das Ladegerät, bis er einrastet.
3. The charging indicator light on the charger will illuminate, typically red, to indicate that charging has begun.
4. Once the battery is fully charged, the indicator light will change (e.g., to green or turn off, depending on the charger model).
5. Remove the battery pack from the charger by pressing the release buttons and sliding it out.

5. Einsetzen und Entfernen der Batterie

Proper installation and removal ensure secure connection and prevent damage to the battery or tool.

5.1. Installation

1. Richten Sie den Akku an der Akkubuchse Ihres DEWALT 18V-Werkzeugs aus.
2. Slide the battery pack into the tool until you hear a click, indicating it is securely latched.
3. Stellen Sie sicher, dass der Akku vollständig eingesetzt ist, bevor Sie das Werkzeug in Betrieb nehmen.

5.2. Entfernung

1. Locate the battery release buttons on the sides of the battery pack.
2. Press and hold both release buttons simultaneously.
3. Schieben Sie den Akku aus dem Werkzeug.

6. Operation with DEWALT 18V Tools

The DEWALT 18V XRP Battery Pack is designed to seamlessly integrate with your existing DEWALT 18V cordless tools. Once installed, the battery provides power for the tool's motor. Always refer to your specific tool's instruction manual for detailed operating procedures, safety warnings, and recommended applications.

• Ensure the battery is fully charged before starting any task to maximize performance and runtime.
• Avoid over-discharging the battery, as this can reduce its overall lifespan.
• If the tool's performance decreases significantly, it is an indication that the battery needs recharging.

7. Wartung und Lagerung

Proper care and storage will extend the life of your DEWALT 18V XRP battery packs.

• Reinigung: Keep the battery terminals clean. Use a clean, dry cloth to wipe off any dust or debris.
• Lagerung: Store battery packs in a cool, dry place, away from direct sunlight and excessive heat. Ideal storage temperature is below 80°F (27°C).
• Langzeitlagerung: For long-term storage, charge the battery packs fully before storing. Recharge them every 6 months to maintain their capacity.
• Recycling: NiCAD batteries should be recycled responsibly. Do not dispose of them in household waste. Look for local battery recycling programs.

8. Fehlerbehebung

If you encounter issues with your battery pack, consider the following common solutions:

• Akku lädt nicht:
  • Stellen Sie sicher, dass das Ladegerät ordnungsgemäß an eine funktionierende Steckdose angeschlossen ist.
  • Prüfen Sie, ob der Akku vollständig im Ladegerät sitzt.
  • Verify that the battery terminals are clean and free of obstruction.
  • If the charger indicates a fault (e.g., flashing light pattern), consult the charger's manual.
• Reduzierte Laufzeit:
  • Die Batterie nähert sich möglicherweise dem Ende ihrer Lebensdauer.
  • Stellen Sie sicher, dass der Akku vor der Verwendung vollständig aufgeladen ist.
  • Operating tools in extreme temperatures can affect battery performance.
• Battery Not Fitting in Tool:
  • Ensure the battery is correctly aligned with the tool's battery port.
  • Check for any debris or damage in the battery port or on the battery itself.

Sollten die Probleme weiterhin bestehen, wenden Sie sich bitte an den DEWALT-Kundendienst oder an ein autorisiertes Servicecenter.

9. Spezifikationen

10. Garantieinformationen

The DEWALT 18V XRP Battery Pack (DC9096-2) comes with the following warranty and service terms:

• 90-Tage-Geld-zurück-Garantie: If you are not completely satisfied with the performance of your DEWALT power tool, laser, or nailer for any reason, you can return it within 90 days from the date of purchase for a full refund.
• 1 Jahr kostenloser Servicevertrag: DEWALT wartet das Werkzeug und ersetzt abgenutzte Teile durch normale Verwendung kostenlos, jederzeit im ersten Jahr nach dem Kauf.
• 3 Jahre eingeschränkte Garantie: DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse.

For full warranty details and to register your product, please visit the official DEWALT webWebsite oder wenden Sie sich an den Kundendienst.