Eltax Atomic A-8.2 Aktiv-Subwoofer – Benutzerhandbuch

Aufstellen

1. Auspacken

Nehmen Sie alle Komponenten vorsichtig aus der Verpackung. Stellen Sie sicher, dass folgende Teile vorhanden sind:

• Eltax Atomic A-8.2 Subwoofer Unit
• Amplifier/Power Supply Unit
• Netzkabel
• Fernbedienung (falls im Lieferumfang enthalten)

Bewahren Sie die Verpackung für einen späteren Transport oder eine Lagerung auf.

2. Platzierung

For optimal sound performance, place the subwoofer on a stable, flat surface, such as a tabletop. Experiment with different locations in your room to find the best bass response. Avoid placing it directly against walls or in corners, which can sometimes lead to boomy or uneven bass.

3. Verbindungen

Befolgen Sie diese Schritte, um Ihren Subwoofer anzuschließen:

1. Stromanschluss: Schließen Sie das Netzkabel an den amplifier/power supply unit, and then plug it into a standard electrical outlet.
2. Audioeingang (Bluetooth): The Eltax Atomic A-8.2 primarily uses Bluetooth for audio input. Ensure your source device (e.g., personal computer, smartphone, laptop, tablet, television, projector) has Bluetooth enabled.
3. Erstes Einschalten: Once connected, turn on the subwoofer using the power switch, usually located on the rear panel or via the remote control.

Bedienungsanleitung

1. Ein-/Ausschalten

To power on the subwoofer, press the power button on the unit or the remote control. The power indicator light will illuminate. To power off, press the power button again.

2. Bluetooth-Kopplung

So verbinden Sie Ihr Gerät über Bluetooth:

1. Ensure the subwoofer is powered on and in pairing mode (often indicated by a blinking Bluetooth light).
2. On your compatible device (smartphone, tablet, etc.), go to the Bluetooth settings.
3. Suchen nach available devices and select "Eltax Atomic A-8.2" from the list.
4. Once paired, the Bluetooth indicator light on the subwoofer will become solid, and you can begin playing audio.

3. Lautstärkeregelung

Adjust the volume using the remote control provided with the subwoofer. You may also control the master volume from your connected Bluetooth device.

4. Audio Output Mode

The Eltax Atomic A-8.2 supports a Surround audio output mode, providing an immersive sound experience, particularly for movies and games. Its configuration is 1.0, meaning it is a dedicated subwoofer channel.

5. Empfohlene Anwendungen

This subwoofer is ideally suited for enhancing the audio experience when used with smartphones or tablets, providing rich, deep bass for music, movies, and other multimedia content.

Wartung

Reinigung

To clean the subwoofer, use a soft, dry cloth. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these can damage the finish or internal components. Ensure the unit is unplugged before cleaning.

Allgemeine Pflege

Keep the subwoofer away from direct sunlight, heat sources, and excessive moisture. Ensure proper ventilation around the unit to prevent overheating.

Fehlerbehebung

Technische Daten

Garantieinformationen

The Eltax Atomic A-8.2 Subwoofer comes with a Eingeschränkte Garantie. For specific terms and conditions of the warranty, please refer to the warranty card included with your product packaging or visit the official Eltax webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Unterstützung

If you encounter any issues not covered in this manual or require further assistance, please contact Eltax customer support. Refer to the product packaging or the official Eltax website for contact details and additional support resources.