V8 ENC Headset
Product Information:
Specifications:
- Product Name: ENC headset V8
- Model: DBS ENC headset
- Bluetooth Version: Compatible with Bluetooth-enabled
devices - Charging: LED indicator (red when charging, blue when fully
charged) - Functions: Answer/End calls, Voice assistant, Redial, Mute
microphone, Ambient sound control, Music playback control
Product Usage Instructions:
Pairing with a Bluetooth Mobile Phone:
- Power on the headset and enable your cell phone’s Bluetooth
function. - Search for available Bluetooth devices on your phone and select
the model of your headset to connect.
Multi-Points Connection:
- Pair with the first device following the pairing
procedure. - Turn off Bluetooth on the first device.
- Repeat pairing procedure to pair with the second device.
- Turn on the Bluetooth function of the first device.
- Power on the headset into standby mode to automatically connect
to both devices. Some phones may require manual connection.
Charging:
- Plug the headset into a power outlet.
- The LED indicator will be red during charging and turn blue
when fully charged.
Frequently Asked Questions (FAQ):
Q: How do I mute the microphone during a call?
A: Click once to mute the mic during the phone talk. Click again
to resume the mic’s function.
Q: How do I adjust the volume during a call or music
playback?
A: Click once to adjust the volume during a call or music
playback. Long press to change the song.
ENC headset V8
USER MANUAL
Thank you for choosing DBS ENC headset, please read this user guide carefully at first operation, it will help you understand and use the ENC headset series properly.
Power on/Power off Model V8/A8, power on the headset via the specified power key , the led flashes blue and red alternatively and voice prompt “Power on, pairing”as pairing mod. Power off the headset, the led flashes red and voice prompt “Power off”, then now the headset is in off mode. Model P8, power on the headset via long pressing MFB key about 3s, the LED flashes blue and red alternatively and voice prompt “Power on, pairing” as paring mode then waiting for connection. Power off the headset by long pressing the MFB key about 5s. *The headset will power off automatically if it is not being connected within 5minutes.*
Pair your headset with a bluetooth mobile phone Power on the headset and turn on your cell phone’s bluetooth function and search for available bluetooth devices, select the model of your headset to connect the headset to your cell phone.
Multi-points connection Follow the above pairing procedure to pair with the first device, turn off the Bluetooth function of the first device, repeat pairing procedure to pair with the second device, then turn on the first device’s Bluetooth function. Power on the headset into standby mode, the headpset will automatically recognize and connect to both devices accordingly. *Some phone may request connection manually*
Charging your headset Plug the headset to a power outlet, the LED will be red during the being charged period, and turn blue once the headset being fully charged.
Function
Operation in detail
Answer a call
Click once to answer the incoming call
End the call
Reject the call
Voice assistant
Redial last call out Mute microphone (V8/A8 special function)
Click once to end the call during the phone call
Long press 3s to reject the incoming call
Long press 3s when the headset is in standby mode
Double click to redial last called out number
Click once to mute the mic during the phone talk, click again to resume the mic’s function
Turn on/off ambient Click to turn on the ambient sound
sound
during phone call if need, click once
(V8H special function) again to turn off the ambient sound
Play/Pause music
Volume adjustment & Song tracks
V8H/A8/P8, Click once to pause or play music V8C/V8L, Click once to pause or play music
Click once to adjust volume during phone call or music playback, long press to change song
Encendido/Apagado Modelo V8/A8, encienda el auricular a través de la tecla de encendido especificada , el LED parpadea en azul y rojo alternativamente y la voz indica “Encendido, emparejamiento” como modo de emparejamiento. Apague el auricular, el LED parpadea en rojo y la voz indica “Apagado”, luego ahora el auricular está en modo apagado. Modelo P8, encienda el auricular presionando prolongadamente la tecla MFB aproximadamente 3 s, el LED parpadea en azul y rojo alternativamente y la voz indica “Encendido, emparejamiento” como modo de emparejamiento y luego espere la conexión. Apague el auricular presionando prolongadamente la tecla MFB aproximadamente 5 s. *El auricular se apagará automáticamente si no se conecta dentro de los 5 minutos.*
Empareje el auricular con un teléfono móvil con Bluetooth Encienda el auricular y active la función Bluetooth de su teléfono celular y busque dispositivos Bluetooth disponibles, seleccione el modelo de su auricular para conectar el auricular a su teléfono celular.
Conexión multipuntos Siga el procedimiento de emparejamiento anterior para emparejar con el primer dispositivo, apague la función Bluetooth del primer dispositivo, repita el procedimiento de emparejamiento para emparejar con el segundo dispositivo y luego encienda la función Bluetooth del primer dispositivo. Encienda los auriculares en modo de espera; los auriculares reconocerán y se conectarán automáticamente a ambos dispositivos. *Algunos teléfonos pueden solicitar la conexión manual*
Carga de los auriculares Conecte los auriculares a una toma de corriente; el LED estará rojo durante el período de carga y se volverá azul una vez que los auriculares estén completamente cargados.
Función
Funcionamiento en detalle
Responder una llamada
Haga clic en una vez para responder la llamada entrante
Finalizar la llamada
Haga clic en una vez para finalizar la llamada durante el procedimiento de llamada telefónica
Rechazar la llamada
Mantenga presionado durante 3 segundos para rechazar la llamada entrante
Asistente de voz
Mantenga presionado durante 3 segundos cuando el auricular esté en modo de espera
Volver a marcar la última Haga doble clic en para volver a marcar el último
llamada
número marcado
Haga clic en una vez para silenciar el micrófono
Silenciar el micrófono
durante la conversación telefónica, haga clic
(V8/A8 espeical función ) nuevamente para reanudar la función del
micrófono
Activar/desactivar el sonido ambiente (V8H especial función)
Haga clic en para activar el sonido ambiente durante la llamada telefónica si es necesario, haga clic nuevamente para desactivar el sonido ambiente
Reproducir/Pausar música
Ajuste del volumen y pistas de canciones
V8H/A8/P8, haga clic en una vez para pausar o reproducir música V8C/V8L, haga clic en una vez para pausar o reproducir música
Haga clic en una vez para ajustar el volumen durante una llamada telefónica o la reproducción de música, mantenga presionado para cambiar de canción
FCC Caution. (1)§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
YOUTH SPORTS MUSIC PASSION
Discover all things music Inspire all things youth
Documents / Resources
 | DBS V8 ENC Headset [pdf] User Manual A8, P8, V8 ENC Headset, V8, ENC Headset, Headset |