DAVIS Vantage Vue Weather Station User Guide
INSTRUCTIONS
- Prepare the Sensor Suite: attach wind cups and wind vane; pull tab on battery (or install battery if not included); install debris screen and rain collector tipping spoon assembly
- If using WeatherLink Live, download the WeatherLink app. If using a Console, install power and set up the Console.
- Verify data transmission from the Sensor Suite to the WeatherLink app and/or to the Console.
Note: For best reception during this step, WeatherLink Live and/or Console and the Sensor Suite should be at least 10 feet (3 meters) apart. (Initial reception typically takes 1-3 minutes but can take up to 10 minutes depending on specific environmental conditions.) - Mount the Sensor Suite to its outside mounting pole.
Please refer to your manuals for detailed instructions.
Manuals can be downloaded at www.davisinstruments.com/vv-manual.
Copyright ©2021 Davis Instruments Corp. All rights reserved.
07395.257 Rev. E 7/19/2021
Documents / Resources
 | DAVIS Vantage Vue Weather Station [pdf] User Guide Vantage Vue, Weather Station, Vantage Vue Weather Station |
