david LED6SU4L/3 LED Lamp Instruction Manual

LED-lamps should only be replaced if the power has been disconnected.
Do not use damaged lamps.
LED-lamps should only be installed and used according to the manufacturer‘s instructions. Permissible voltage and power rating of the lamp must be observed without fail. Values below or above the limit can damage the LED-lamps.
If used with dimmers or other electronic control systems, a qualified electrician should be consulted.
The lamp should be cleaned regularly for a long lifetime.
Operation with starter lamps in the same circuit is not permitted.
Operation in non-ventilated, closed luminaire housings is not permitted.
No disposal of defective luminaires with household waste.
Return via public collection points.

Technical specifications

Installation

Ensure the power source is switched off before installation.
Insert the LED Spot MR8 into the compatible fixture/socket.
Apply gentle pressure to secure the spot in place.
Turn on the power to test the LED spot.

Operation:

To turn the LED spot on, switch the power to the ON position. To turn it off, switch the power to the OFF position. The LED spot has a quick startup time of less than 0.5 seconds.

Maintenance:

Regularly clean the LED spot with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials that may damage the surface of the spot.

Product Specifications:

Model: LED6SU4L/3
Product Type: LED Spot MR8
Color Temperature: 3000K
Lifespan: 50,000 hours (L70)
IP Rating: IP20
Switching Cycles: >25,000
Color Rendering Index (CRI): >80
Input: AC/DC
Startup Time: < 0.5 seconds
SDCM: Standard Deviation of Color Matching

David Communication e.K. . Gewerbestraße 10 . 21391 Reppenstedt

EN 55015 :2013+A1: 2015
EN 61547 :2009
EN 61000-3-2 :2014
EN 61000-3-3 :2013/prA1:2016
EN 62321-7-1 :2015
EN 62471 :2008

www.david-comm.de

Frequently Asked Questions (FAQ):

Q: What is the color temperature of the LED Spot MR8?

A: The LED Spot MR8 has a color temperature of 3000K, providing a warm white light.

Q: What is the lifespan of the LED Spot MR8?

A: The LED Spot MR8 has a lifespan of 50,000 hours before reaching L70 (where light output degrades to 70% of its initial level).

Q: What is the IP Rating of the LED Spot MR8?

A: The LED Spot MR8 has an IP20 rating, suitable for indoor use in dry environments.

Documents / Resources

david LED6SU4L/3 LED Lamp [pdf] Instruction Manual
LED6SU4L-3, MR8, LED Spot MR8, LED6SU4L 3 LED Lamp, LED6SU4L 3, LED Lamp, Lamp

References

User Manual

david LED6SU4L/3 LED Lamp

LED6SU4L/3

Safety and disposal instructions