Danfoss RLV-X Lockshield Valve
Overview
The lockshield valve, also known as Vorlauf- or Absperrverschraubung, is used for isolation and drainage in heating systems. This guide provides instructions for installation and operation.
Specifications
| Component | Description |
|---|---|
| Lockshield Valve | Used for isolation and drainage |
| Model | RLV-X |
| Part Number | 013R9362 |
Installation Steps
Step 1: Initial Setup
Use a wrench (19) to secure the valve to the radiator. Ensure it is tightly fitted to prevent leaks.
Step 2: Valve Adjustment
There are two methods for adjusting the valve:
- Method a: Use a screwdriver to turn the valve clockwise or counterclockwise as needed.
- Method b: Manually adjust the valve by rotating it to the desired position.
Step 3: Final Assembly
Ensure all components are securely fastened. Check for any leaks and tighten connections if necessary.
Filling the Radiator Using Danfoss Drain Cock Adaptor
Instructions
- Attach the Danfoss drain cock adaptor to the radiator.
- Ensure the adaptor is tightly secured to prevent leaks.
- Fill the radiator by opening the valve and allowing water to flow in.
Draining the radiator using Danfoss drain cock adaptor
FAQ
How do I know if the lockshield valve is compatible with my radiator?
Check the specifications of your radiator and consult with a professional if needed to ensure compatibility.
Can I use the Danfoss drain cock adaptor with other radiator brands?
The Danfoss drain cock adaptor is designed for use with Danfoss products, using it with other brands may not be recommended.
Documents / Resources
 | Danfoss RLV-X Lockshield Valve [pdf] User Manual 013R9362, 013G9362, RLV-X Lockshield Valve, RLV-X, Lockshield Valve, Valve |