Danfoss-logo-01Danfoss Pack Controller AK-PC 782B with USB-B

Danfoss-Pack-Controller-AK-PC-782B-with-USB-B-product

Installation Guide 

Pack Controller, type AK-PC 782B Danfoss-Pack-Controller-AK-PC-782B-with-USB-B-fig1 Danfoss-Pack-Controller-AK-PC-782B-with-USB-B-fig2

WARNING: Ensure power is disconnected before adding or removing modules. Danfoss-Pack-Controller-AK-PC-782B-with-USB-B-fig3

CAUTION:

  • -20 °C < tamb < 55 °C
  • -0 °F < tamb < 130 °F
  • 0 – 95% RH, non condensing
  • IP10 / VBG4
  • UL: E31024

Danfoss-Pack-Controller-AK-PC-782B-with-USB-B-fig4

Supply voltage:
Transformer
Class II
The 24 V must not be shared by other controllers or units
The 24 V input must not have earth connection Danfoss-Pack-Controller-AK-PC-782B-with-USB-B-fig5

Point Danfoss-Pack-Controller-AK-PC-782B-with-USB-B-fig6

 

Documents / Resources

Danfoss Pack Controller AK-PC 782B with USB-B [pdf] Installation Guide
Pack Controller AK-PC 782B with USB-B

References

Leave a comment

Your email address will not be published. Required fields are marked *